Congrats, Bro!!
Great job!!
PROTON SAGA BLM, FL, FLX CLUB V30, with <3s
PROTON SAGA BLM, FL, FLX CLUB V30, with <3s
|
Sep 3 2012, 05:09 PM
Return to original view | Post
#1
|
Senior Member
784 posts Joined: Jan 2003 From: Rice Bowl of Msia |
Congrats, Bro!!
Great job!! |
|
|
|
Sep 3 2012, 05:57 PM
Return to original view | Post
#2
|
Senior Member
784 posts Joined: Jan 2003 From: Rice Bowl of Msia |
QUOTE(saga_911 @ Sep 3 2012, 05:52 PM) The DIY one? Or ready-made one? If DIY one, juz need 2buy Iswara/Saga Fuel(Petrol) Filter...abt RM4 only... And 2 lengths of petrol tubing....length depends on need. But firstly need 2locate PCV outlet of Gaga & the other end of the connecting tube. Then it's juz "kacang" DIY install... ps. Pls chk out pic (below) posted earlier in V29. TQ. This post has been edited by zeone: Sep 3 2012, 06:11 PM Attached thumbnail(s) |
|
Sep 3 2012, 08:10 PM
Return to original view | Post
#3
|
Senior Member
784 posts Joined: Jan 2003 From: Rice Bowl of Msia |
QUOTE(davidke20 @ Sep 3 2012, 07:50 PM) Meanwhile, pak Z1, hang belom bagi tau adaptor dapat mana eh? I tunggu tunggu takde news pon. Nanti immediately I go put up the thing than will be the 1st white rat for you guys Suruh 911 jgn rush lar, nanti pak Dabid kasi bikin ambulans tu The Fuel Filter? Same as in yr Iswaga lo... Tubes? Best 2get for fuel line wan so can tahan the oil... Where 2connect? That's the prob now...dunno layout of tubes @back of Gaga engine la... Once get the oil fumes out point and the othernend ie the suction into Intake Manifold, no prob oledi... Juz need measure lengths of tubing needed nia... Install = remove & replace only... ps. Maintenance is juz checking oil level in Fuel Filter @each oil change & replacing it if necessary only... From past experience, in old engine, need 2replace after only 15k Km or even more... This post has been edited by zeone: Sep 3 2012, 08:29 PM |
|
Sep 3 2012, 08:36 PM
Return to original view | Post
#4
|
Senior Member
784 posts Joined: Jan 2003 From: Rice Bowl of Msia |
QUOTE(davidke20 @ Sep 3 2012, 08:25 PM) The oil filter is open ended, you need sumthing to hook it isn't it? The oil filter surface so damn big, how to hook 2 small hose on it leh? I just wanto know you use what to connect the 2 hose and what to cover the oil filter. I certainly know where is the PCV and intake mia breather, but I couldn't take foto yet as wifey still kidnapping the kar The 2 tubes are juz push-fit onto the FF...shld be same also @ the other ends, IINM.... Me previously juz used cable ties 2keep the FF upright so that oil caught in it wld not be sucked out via outlet tube. We can decide where 2attach it once yu "reveal" the 2 locations... Ok, Bro? |
|
Sep 3 2012, 08:51 PM
Return to original view | Post
#5
|
Senior Member
784 posts Joined: Jan 2003 From: Rice Bowl of Msia |
|
|
Sep 3 2012, 11:02 PM
Return to original view | Post
#6
|
Senior Member
784 posts Joined: Jan 2003 From: Rice Bowl of Msia |
QUOTE(honamd77 @ Sep 3 2012, 10:51 PM) So many cases?Phew... Everyone involved shld juz make a police report each. Then accumulated reports wld bring some form of action...at least there wld be hope? No point making all the "noises" in the Net itself....serves no purpose wan... That guy wld be laughing all the way to his bank(s)!! |
|
Sep 3 2012, 11:06 PM
Return to original view | Post
#7
|
Senior Member
784 posts Joined: Jan 2003 From: Rice Bowl of Msia |
QUOTE(kenjilew @ Sep 3 2012, 10:42 PM) Legally, Bro?Are yu UNDER 18? No? Then sorry la.... Cos if 18+, then the Law says yu're old enuf 2kno wat yu're doing & 2TC of yrself liao.... ps. JJ nia... pps. Me not bully...so no worries... Ok, Bro? This post has been edited by zeone: Sep 3 2012, 11:10 PM |
|
Sep 3 2012, 11:45 PM
Return to original view | Post
#8
|
Senior Member
784 posts Joined: Jan 2003 From: Rice Bowl of Msia |
QUOTE(kenjilew @ Sep 3 2012, 11:23 PM) QUOTE(Fubar20 @ Sep 3 2012, 11:26 PM) Me was once given this saying...as a good advice...By an Educator...Kenot rber exact words but goes something like this... "Catch him a fish and yu feed him for a meal; Teach him how to fish and yu feed him for Life...." Heard that b4, anyone? Somewhere? Some time...? ps. No offence meant nor intended...juz sharing... This post has been edited by zeone: Sep 3 2012, 11:47 PM |
|
|
|
Sep 3 2012, 11:51 PM
Return to original view | Post
#9
|
Senior Member
784 posts Joined: Jan 2003 From: Rice Bowl of Msia |
|
|
Sep 4 2012, 07:40 AM
Return to original view | Post
#10
|
Senior Member
784 posts Joined: Jan 2003 From: Rice Bowl of Msia |
QUOTE(jasonloh7906 @ Sep 4 2012, 01:57 AM) Hi Bro... & Good morning!!Everyone else, too!! For everything electrical/electronic, pls chk the relevant fuse it is connected to ie in the Fusebox. Chk if it's blown/fused...Replace if so. If ok, then chk item itself...in this case, the headlamp bulbs. Finally it cld be a faulty switch. Best wishes.... |
|
Sep 4 2012, 08:28 AM
Return to original view | Post
#11
|
Senior Member
784 posts Joined: Jan 2003 From: Rice Bowl of Msia |
|
|
Sep 4 2012, 12:22 PM
Return to original view | Post
#12
|
Senior Member
784 posts Joined: Jan 2003 From: Rice Bowl of Msia |
QUOTE(gogoman86 @ Sep 4 2012, 12:11 PM) Sikagard Bituminous Spray Good there...Price : RM 2x.xx / can (dealer said price could be lower depend on order quantities) Coverage : Still Pending on their technical sheet to confirm quantity needed for all 4 arch.. It's a sprayable bituminous in 500 ml per can. Fast-drying, aerosol stone chip coating, high resistance against corrosion, remains flexible when dried and IT'S INSTANT TO USE...! Spray it onto wheel arch to protect again corrosion, reduce stone chip noise, reduce rain water noise & reduce tyre noise. Do keep all informed/updated, Bro... |
|
Sep 4 2012, 12:48 PM
Return to original view | Post
#13
|
Senior Member
784 posts Joined: Jan 2003 From: Rice Bowl of Msia |
Juz2share...
As temp stop-gap measure, me hv oledi sprayed underside of my Gaga with Car Plan Tetroseal....got Clear & Black versions. It's a Wax/Oil Rustproofing spray, 500ml/can. Bought 2 cans so far @Parkson & Pacific @RM20/can also... Note : This is NOT a bituminous underseal...more of rustproofing... ps. What me hv used b4 ie STP Underseal, is a better option. So if wat Bro gogoman has found is similar, that wld be a good alternative... This post has been edited by zeone: Sep 4 2012, 12:52 PM |
|
Sep 4 2012, 12:58 PM
Return to original view | Post
#14
|
Senior Member
784 posts Joined: Jan 2003 From: Rice Bowl of Msia |
QUOTE(davidke20 @ Sep 4 2012, 12:52 PM) Already got a unit of "OIL CATCH CAN", going for 5 bucks. I dunno how much the hose gonna cost yet. Anyone in Puchong wanna become my white rat? I don't have my BLM, couldn't do yet. I will be here until 4pm. Not convenient to post/check PM. R3apers/dares have my contact. Hurry! Be the white rat! No cutting required! No warranty void! Heathier engine and better air quality! Hi Bro...Suggestion : If existing hose/tube fr PCV to IM has enuf free play, mayb can save sumore $$ by cutting that tube and insert OCT in-btwin. If not wanna void warranty (?) , mayb better not.... |
|
|
|
Sep 4 2012, 05:53 PM
Return to original view | Post
#15
|
Senior Member
784 posts Joined: Jan 2003 From: Rice Bowl of Msia |
QUOTE(sahar @ Sep 4 2012, 05:08 PM) Hi...This is what me found in Proton FBk pages....re engine cover query:Proton Edar Hi Peter E*** S***, please be informed that the engine cover cannot be installed for Proton Saga FLX. Rest assured, without the engine cover, it will not have any effect on the safety and operation of the engine as it has been tested by manufacturing. November 11, 2011 at 12:07am Link here ==> http://www.facebook.com/media/set/?set=a.3...tal_comments=13 This post has been edited by zeone: Sep 4 2012, 05:54 PM |
|
Sep 4 2012, 06:06 PM
Return to original view | Post
#16
|
Senior Member
784 posts Joined: Jan 2003 From: Rice Bowl of Msia |
|
|
Sep 5 2012, 05:52 PM
Return to original view | Post
#17
|
Senior Member
784 posts Joined: Jan 2003 From: Rice Bowl of Msia |
QUOTE(davidke20 @ Sep 5 2012, 03:45 PM) I did it that way for BLM bcoz without ABS, that side is kosong, we can hang a 1 litre pepsi bottle there also no problem. Besides, I also planned to put back engine cover to make it as original as possible to stay below radar. Hi Bro....hv yu read my PM?For FLXer, it is possible to hang anywhere around the engine bay. Shorter the hose can save you another dollar. But I need an FLX white rat. Any taker(s)? There are also choices of BLUE, YELLOW hose that can make your engie bay more bling-bling like a ricer. Costing difference is RM1 or 2 only. I like the 1 I'm using in 911 kinda transparent is because I can monitor the structure integrity of the nylon reinforcement. Atleast I can see if the nylon start to break, I know its time to change hose, but that will probably happen 3 years or later. The hose I use is imported from Japan industrial LPG tank channel, can suppress up to 9 BAR dude 1000hp dragter's turbo engine only charged 2bar I made that choice base on reliability/performanceand its the most reasonable price tagged among all other bling-bling hose. AlteHirnatively, you can go kedai logam look for shower head type of steel braded hose oso. Spray the end joint so it looks like HKS lar, but the inner core reliability is your own responsibility though Another white rat please. Or call for bulk already Kenot DIY myself w/o yr sp & important info for BLM/FL... No worries... Izzit possible 4yu 2make one unit fully setup c/w yr DIY adaptors for both ends of connection AND Poslaju it 2me? Will FT payment 2yu if possible? TQ very much in adv. |
|
Sep 5 2012, 06:17 PM
Return to original view | Post
#18
|
Senior Member
784 posts Joined: Jan 2003 From: Rice Bowl of Msia |
QUOTE(dares @ Sep 5 2012, 06:13 PM) Hold your horses, there are some readings I have listed that doesnt work because out gaga dont have the sensors. So far the ones I know that doesnt work is the AFR, engine oil temperature and accelerator pedal position (manifold throttle position works, though) Hi Bro...above in RED is mosdef NOT good news la... Right now I am using the speedometer, tachometer, vacuum gauge, voltmeter and km/l gauge... Buy from LYN seller RM 75 including postage. Fortunately for you, the seller is also in mlk. Pastu another 300bux for an android device if you dont have one Dunni if works for FLX exec, but mosdef doesnt work for FL and BLM. Added on September 5, 2012, 6:32 pmps. mayb me need to get an FLX SE, huh? Haha! This post has been edited by zeone: Sep 5 2012, 06:32 PM |
|
Sep 5 2012, 09:57 PM
Return to original view | Post
#19
|
Senior Member
784 posts Joined: Jan 2003 From: Rice Bowl of Msia |
Hi...
Juz found this... Juz 2share... Georgetown (Penang) Gangnam Style.... |
|
Sep 5 2012, 10:12 PM
Return to original view | Post
#20
|
Senior Member
784 posts Joined: Jan 2003 From: Rice Bowl of Msia |
|
Topic ClosedOptions
|
Change to: | 0.0483sec
0.33
7 queries
GZIP Disabled
Time is now: 28th March 2024 - 11:59 PM |