while im still thinking of my next front speakers should be, i wonder what others/sifus have been running currently/was running over the years

hope we can share our experience----

is it a 2-way/3way/single-driver/coaxials?
tweeter--soft dome/metal/horns/isodynamics/planar/ribbons?----tweeter location?
midrange----dome/cone ,driver size, location?
midbass---size, location, enclosure?
fully active/passives
using eq? no?
why do you settled with the current setup over previous ones?

depend on what you want to do.
i using buddy z5500
big bass.. of course below my table so that i can put my leg on it.
rear and front speaker angle doesn't really matter though, the important is the sound are balance.
might want to consider get a sound card.
you might need to think of the software side also other than hardware.

hmmm home theather setup or for ICE?

Home theather>High end user>better user>Normal user

what system you use before?
budget?

This post has been edited by cj7: Aug 29 2012, 12:01 AM

you use z5500 in the car?
i tried use satellites fr z560 before---pair it with peerless mids
that was before people know tangband----even madisound din sell them that time

is it a 2-way/3way/single-driver/coaxials? - either 3 way or 4 way, single drivers
tweeter--soft dome/metal/horns/isodynamics/planar/ribbons?----tweeter location? - prefer soft dome, in A-panels
midrange----dome/cone ,driver size, location? - prefer soft dome, 4 inches, A panels too
midbass---size, location, enclosure? 6.5 inch to 8 inch, doors, use door as enclosure
fully active/passives - prefer full active
using eq? no? - use eq in processor or head unit, or the ones from audio control

thx,is this the alpine f1


This post has been edited by malutapimau: Aug 31 2012, 10:33 AM

which one?

spx-z18t

yes that is F1

How much for this Alpine F1 spx-z18t ?

5k++ i think

Depending on your budget.. Usually the easiest setup is to focus on the front side of the car.

Then the HU is possible with Time Alignment.

Subwoofer is a must to complete the sound staging.

A good amplifier to last you a long time.

nobody got stock, last time used to be 8k and later 6k i think

zenn, the spx-z18t midrange at a pillars,,,,,do they have a enclosure/sealed?

---

Added on September 12, 2012, 3:41 pmand whats the xover point of the midrange?

This post has been edited by malutapimau: Sep 12 2012, 03:41 PM

I used P99... no budget for Alpine F1..

It has to be an enclosure.
Xover point vary for every combination, so it's really pointless to ask abt xover point of other ppl

im assuming you have midrange at A pillar sealed? whats the enclosure volume?

around 1ltr

1ltr?you sealed the whole a pillar?

Customize a pillar with an enclosure attached
Sth like this...

nice---------

---

Added on September 21, 2012, 10:31 amthis has more ergonomics design----
http://custombass.blogspot.com/2012_06_01_archive.html

i really want those mmats 6150d!

This post has been edited by malutapimau: Sep 21 2012, 10:31 AM

D beetle in ur links is nice too
Y only limited urself with 6150, I believe there are many equivalent product too

cincai enclosure within the A pillars, never measured.....bandpassed around 250-2500hz

thx for sharing

bro...
tak tengok bola ker..??

tgk le

Great topic for newbie ice like me..

may i know, tuning audio quality at hu or at amp?

What is tuning quality?

tuning features? more at HU, nothing much at amp side usually.