Yes. Gearbox mounting is half bad but left and right engine mounting still okay.
Front door already DIY with lousy insulation. Air-con still on at level 1. Stock HU level 12
still able to listen to Somewhere Only We Know....lol.

ajaibman
Noise insulation on doors and panel will increased travel comfort. And better audio experience too.
Me just started with lousy noise insulation stuff.

TripleJ104
Never heard of the brand before
Me planning to try Mitsubishi soon.

Azuma-kun
Search for Speed Art in Mudah or try BK Motorsports and G Car Care.

Any reason?
Never been there but I saw their FB with Campro drag machine.

carrera_gt
That is dream car la...lets talk about something more attainable in near future

Me only started door DIY. You will not believe the different made by double side tape, good quality plastic and cheap aluminium sheet from Daiso.
Total damaged on 2 front door = RM30 but much less sound intrusion from the used to be hollow door. Also no more tyres roar sound from side .
Next will be adding another layer of dynamat. One with aluminium cover.

carrera_gt
K&N drop in and Exhaust work will be just fine.

No problem. You buy all the stuffs, bring your car to my parking slot bawah pokok and I get it done. Your place got a lot of mosquito
Actually, I was thinking, since the layer is made of plastic, it will be okay to cover the holes with cheap plastic as cheaper and easier
to remove also. Didn't know the result is okay. But Passenger door got vibration as I pushed the wiring connector too close to
door panel without padding. Driver side got padding so no vibration.

TripleJ104
Cheap aluminium sheet as another layer after covering the respective hole with thick plastic as I noticed there are water drop marks going in. Plastic is waterproof but don't choose the thick and shining plastic as it cannot withstand the heat.
Expensive soundproofing material is more suitable to to put inside as it will not trap water and moist.

eastwest
A rubber material with glue which already cut into pieces cost RM1.90 bought from Mr.DIY
Just nice to absorb the vibration when the connectors are pressed too close to door or panel.

ThienWu
Forgot to take picture la. Will take some picture when I got time to works on Azuma's ride.
My basic understanding is, by covering the respective holes, lesser noise intrusion go through the door as original material by Proton only consist of cheap plastic with bitumen. I went just a step further by covering the individual holes with plastic, a layer of aluminium sheet and then put back the original .
Can't expect much from RM30 worth of DIY on 2 doors
Now listening to Jian Ji Dao Di by A-Du offer slightly better experience

Double side tape, thick plastic, rubber padding and bitumen with aluminium layer bought from Mr.DIY@Carrefour Axis.
Aluminium sheet and another plastic sheet from Jusco Maluri Daiso. Almost take the plastic with Hello Kitty printing

No problem

NGV is the answer.

Tayar senyap kn

RE001 and RE002 is good for touge. PS3 grip and traction is better than the 2 but sidewall got add sikit tofu that is why
PS3 not suitable for hard touge. Certain batch of PS3 got tread peel off issue also.

Low profile PS3 is good in high speed straight but still kembang during corners. Unless pump 4 -5 psi higher.
Veyron is using special built run flat Pilot Super Sport la . PS3's speed index cannot match Veyron's top speed also

Tarak ada chance to whack Pirelli as about 3 years ago, me bought a defect new P7000 .
Tyres wobbles during fast corner which is hard to explained. Cannot claim warranty as shop insisted tyre is perfect.
They offer to take back the tyre (845km mileaga) at 30% discount and I change to S-Drive.
Never bother about Pirelli after that.

Maybe can check with Bernard aka Maddriver as he used to have a lubang for those stuff.

I am waiting for one too as me CPS newbie.

You not building a monster, right?

TripleJ104
Apsal demo x tukaq ke pu bushes? bergetah beb!

penpal_my
Front is the dashboard vibration which is quite annoying. Need to put padding. Changing to new lower arm bushes and new absorber can settle the problem as bushes and absorber can absorb the vibration.
The rear could be bushing or absorber problem.

Mine now even the passenger headrest area got vibration sound. I didn't know the CPS qc is worst than the old 4g18. Or maybe because
I inherit a bad condition car as my previous 4G18 never had vibration or squeaking problem for more than 8 years. There is rat sound which gone after change rear arm link.

TripleJ104
X pe la janji ketat


fazron80
1k mileage tyres just go through run in period. More to come . Yokohama Decibel is a good tyre.

2nd day on Petronas. Car feel sluggish as snail. Engine sounds x smooth .
Someone accidently reversed into my car during my trip to Malacca as there is a vibration sound comes from the front bumper area.
Through check show there is a crack in the bumper near the headlamp. Bodykit pin also koyak. . Dah la bodykit tu dah cement sekali kat bumper.
Now I need to spend RM200 for correction and respray
Dah usha bumper Neo CPS style tapi x jumpa2 lagi .

I just posted a reply in Gen2 thread for reference. More of a personal opinion after driving with one.

Morning!

Same weather here. Me done CPS-ing, this morning someone ffk deal me so frustrated end up speeding at MEX from Kesas. managed to stay close to the wall on fast lane corners at 170km/h all the way to Salak Selatan Toll. Stock Waja CPS handling is already very good indeed .