most of time people jus use spacer to convert d hole..rather than change d hub/disc brake set..... d price u can search at mudah.

just send ur car knuckle to engineering shop to change the pcd...

I don't think is good to drill hole on the existing rim, as the structure is weakened, when u run over a brick/hole, scare the drill hole part will crack. Some more the rim is not tested with extra holes (manufacturing/design reliability QA).

Drill holes at your own risk...

But, the material is pretty strong, what drill bit you use to drill through it ar?

I dont think its possible. Why on earth you would want to do that?

you can do either the 2 options people have replied above.
I think its stupid to drill the rim for a new hole just to fit your cars PCD. How are you gonna drill them holes? Hand drill? LOL

If you still insists on doing that (drilling new holes on the rims), then go ahead. but dont come here complaining you broke your rims after one pothole drop.

seen my friend's nissan cefiro A32.
His is a 5 lugs rim. but magically, there is one hole that has another hole drilled onto it.
making his rim suitable for 4 lugs.i am not sure of the pcd, but the rim have a total of 6 lugs.

just give a call these ppl, i think they have the solutions to your problem:-

http://www.zerotohundred.com/newforums/cha...14-139-7-a.html

http://www.zerotohundred.com/newforums/cha...cone-cheap.html

FYI, I'm just pointing you to the right direction    

6?i think it is more than 6 holes.. if ur talking about 5 to 4 lugs.. the only possible way is using 1 hole out of 5.. in which need to add 3 more holes.. and to do that u need to have the same pcd as such  5 holes pcd 114.3 to 4 holes with the same pcd 114.3.. 5x100/4x100.. my current rims is also 4/5 holes of pcd 114.3.. they usually address it as 9 holes as it accommodates 4 and 5 holes with the same pcd but actually it only hav 8 holes..

man..
drilling one single hole WILL NOT make the rim fit to your hub PCD. Read on about PCD and you will know why.

why would you want to go though the hard way?

just get the PCD converter already. Problem solved.

Has anyone done conversion from pcd 114.3 , 5 lugs to pcd
120 5 lugs (BMW rim)

I saw shopee got sell PCD converter , I think what the converter do is from pcd 120 to pcd 114.3
But I want the other way round .

No worries, you dont need to feel bad about this.

Cause i didnt want to simply create a new thread, so even though its like 8 years old thread its still relevant.

Thanks for sharing anyway, I will search also in Mudah