Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 Perodua Kenari User Club V2, A Different Point Of View

views
     
FusionXY
post Oct 16 2018, 01:25 AM

LAZZIE ON VACATION
*******
Senior Member
3,834 posts

Joined: Aug 2016

Perodua Kenari EZ Silver here.

Need some questions to ask.

My mother's car Kenari got some of the problems and the questions as below. Some other questions are not related to problems.

1. Anyone encounter when you start the engine then the driver side window wind down by itself. Once wind down fully then cannot wind up already. Can wind up slowly.
2. After switching off engine from a short drive, cannot start engine back on, need to wait few minutes or a few tries only can start again. Sometimes need to turn off and turn back for the 2nd time.
3. The lock handle is normal for old cars need to manually pull up or push down to lock/unlock. New cars no need to manually push or pull up.
4. Does anyone know what is the thing above the back seat?
How do I permanently disable it. It is very noisy when it is switched on.
5. The air conditioner vent on the side gives out less air which is not powerful. Should I send the SC to check it?

Thanks.

FusionXY
post Oct 17 2018, 12:34 AM

LAZZIE ON VACATION
*******
Senior Member
3,834 posts

Joined: Aug 2016

QUOTE(jaesern @ Oct 17 2018, 12:23 AM)
» Click to show Spoiler - click again to hide... «

sorry for the slow reply, does the problem solve?

check ignition coil & socket and fuel pressure
» Click to show Spoiler - click again to hide... «

if it's auto, i'll suggest you to take genuine Perodua mounting set, i know the price is a pain, rm700+.

if it's manual, either genuine Perodua mounting set or after market brand, Schmaco, should be priced rm300+-.

shock absorber, choose either comfort or handling, unfortunately we're not driving Bentley, there won't be perfect comfort and handling.  icon_rolleyes.gif 
» Click to show Spoiler - click again to hide... «

1. sounds like wiring or connector on switch or window motor short circuited.
2. check starter; cheapskate not permanent solution which might kill the starter faster, hold your key on 'start' position until the engine starts to crank.
3. your question?!
4. ionizer, 4x 10mm bolt to take out whole assembly, unplug the socket and reinstall back.
5. same for all Kenari/Kelisa, no solution unless you're planning to retrofit an aftermarket a/c system, i won't recommend, better just live with it.  icon_rolleyes.gif
*
Thanks for the reply bro.

For question 3. What I mean is that the SC can fix the lock and unlock problems. When I lock using remote still need to manually use the key to lock the car. My mother's car passenger side still works. What I remember last time when my mother's car is still new. Press brake pedal lock all the doors aka central door lock.

The driver side window, we didn't wind down. Open the door when want to take ticket and flash access card.

Thanks.

FusionXY
post Nov 22 2018, 10:52 PM

LAZZIE ON VACATION
*******
Senior Member
3,834 posts

Joined: Aug 2016

Hi, my mother's car Kenari Air Conditioner stopped working after driving through flood water.

No blowing from Speed 1 to Speed 3.
Is it the wiring compressor malfunction?
Need to send to car aircond mechanic or any car mechanic?

Thanks.
FusionXY
post Jun 15 2019, 12:04 PM

LAZZIE ON VACATION
*******
Senior Member
3,834 posts

Joined: Aug 2016

Hi, I have just replaced Kenari with Silicone Wipers.

When I put at the highest speed. Same speed as medium speed.
The wiper like wipe very hard and slow, not that kind of smooth.
Like force to wipe.

What can I do?
Another car Alza no problem on highest speed.

Thanks.
FusionXY
post Jun 15 2019, 03:04 PM

LAZZIE ON VACATION
*******
Senior Member
3,834 posts

Joined: Aug 2016

QUOTE(jaesern @ Jun 15 2019, 12:48 PM)
as i can understand, silicone wipers have higher resistance on wiping compare to rubber.

also, last batch Kenari in the market is already 12 years old, ageing on wiper motor is need to take in consideration.

i'm using silicone wipers + glass coating, wiper only on intermittent most of the time, rarely on first speed.
*
Oh thanks. Same goes to Kelisa and Kancil as well?

Only the big car Alza no problem on high speed.
Medium speed for Kenari still OK. Heavy Rain need to monitor.
Hope medium speed can wipe clear.

Does your Kenari Wiper make sounds during the end on the right. After reach to end then got sound.

Thanks.

This post has been edited by FusionXY: Jun 15 2019, 03:05 PM
FusionXY
post Jun 16 2019, 02:47 PM

LAZZIE ON VACATION
*******
Senior Member
3,834 posts

Joined: Aug 2016

QUOTE(jaesern @ Jun 16 2019, 01:16 PM)
oldest alza in market is 2009, oldest kelisa is 2001, kancil is 1994.

check your wiper operation by looking from outside of the car, wiper blade might hit the windscreen molding and made the sound. unless you're the lucky one, in my experience other than silicone blade, hardly any other part of wiper made sound.
which part of gearbox is leaking?
*
Oh, thanks for the info.


FusionXY
post Jun 25 2019, 09:41 PM

LAZZIE ON VACATION
*******
Senior Member
3,834 posts

Joined: Aug 2016

Hi. Can anyone let me what's the size of light bulb for the following below?
1. Headlights both sides
2. Small tiny headlight
3. Interior light
4. Number plate lights

FusionXY
post Jun 26 2019, 04:29 PM

LAZZIE ON VACATION
*******
Senior Member
3,834 posts

Joined: Aug 2016

QUOTE(jaesern @ Jun 26 2019, 12:10 AM)
H4
H3 (for peanut, not sure about aerodown and rs)
festoon 31mm
w5w (t10 if it's led)
*
Thanks for the info.

How about 3rd-brake light?

Thanks.
FusionXY
post Jun 26 2019, 09:07 PM

LAZZIE ON VACATION
*******
Senior Member
3,834 posts

Joined: Aug 2016

QUOTE(jaesern @ Jun 26 2019, 09:01 PM)
w16w (t15 if it's led)
*
Thanks bro.
The main light H4 is the same for both big and small circle? In the middle one?

Nowadays, switch on fog lamp, no need to switch on the big round circle.
The small round circle light is very bright already.

And lastly, For the front, back and side indicator lights.
Brake light and reverse light.

Need to keep for reference, in case need to change all to led.

The room light and luggage light length are the same?
If different, I will measure it myself.
FusionXY
post Jun 26 2019, 10:56 PM

LAZZIE ON VACATION
*******
Senior Member
3,834 posts

Joined: Aug 2016

QUOTE(jaesern @ Jun 26 2019, 09:01 PM)
w16w (t15 if it's led)
*
This light is H3? Or T10?

user posted image

Thanks.
FusionXY
post Jun 28 2019, 05:33 PM

LAZZIE ON VACATION
*******
Senior Member
3,834 posts

Joined: Aug 2016

deleted

This post has been edited by FusionXY: Jun 28 2019, 05:48 PM
FusionXY
post Jul 6 2019, 02:48 PM

LAZZIE ON VACATION
*******
Senior Member
3,834 posts

Joined: Aug 2016

Hi, anyone know what's the light bulb size for rear brake light, rear indicator light, front indicator light and meter light?

Thanks.
FusionXY
post May 17 2020, 09:41 PM

LAZZIE ON VACATION
*******
Senior Member
3,834 posts

Joined: Aug 2016

Hello guys, wanna ask about the Wiper for Kenari..

Anyone here put 18" Wiper for passenger side?

Thanks.
FusionXY
post Sep 27 2020, 12:30 PM

LAZZIE ON VACATION
*******
Senior Member
3,834 posts

Joined: Aug 2016

Hey guys, anyone of you manage to change the peanut light aka T10 Bulb in front?

I need to remove the screws label as red circle in the picture below then can remove the headlight unit to access the socket behind the lamp.
user posted image
Is it easy to remove and replace back the front headlight unit?

I am afraid that I can remove easily and difficult to put back the unit. sweat.gif sweat.gif


FusionXY
post Sep 28 2020, 03:15 PM

LAZZIE ON VACATION
*******
Senior Member
3,834 posts

Joined: Aug 2016

QUOTE(kllam @ Sep 28 2020, 02:54 PM)
no need to remove the headlights, just remove grill

after u remove th grill u can reach the bulb

i change mine many times this way
*
Oh, thanks for the reply. The grill is the one that hold the headlights with the screw there right?
Is it easy to put back after fixing? I am afraid not able to put back if not success later.
I managed to change the Plate Number Lights only.
Planning to change the Front Peanut Bulb aka T10 and the interior lights as the Festoon 31mm.
Maybe changing the side indicator light to LED Type.
How about the Reverse Light? Any idea what size is that? Is it T20 size?

This post has been edited by FusionXY: Sep 28 2020, 03:23 PM

 

Change to:
| Lo-Fi Version
0.0438sec    0.95    7 queries    GZIP Disabled
Time is now: 6th December 2025 - 04:08 PM