Any idea on the cost to change the clutch set on a manual Kenari?

rocker cover also known as valve cover..basically the top cover of your engine..i think common problem with kelisa and kenari that the cover seal around the spark plug is leaking..so the engine oil will enter the spark plug area..the solution is to change the whole cover..

kelisa and kenari should be the same right?..about rm350 to take out the engine, and rm250-350 depends on the clutch brand..another thing to save the labour cost is to change also the engine flywheel seal..this one if later one day leaking, still have to remove engine..the labour is rm300..but the seal is only about rm30-40..

This post has been edited by megat89: Nov 25 2014, 01:45 PM

any idea how much would that cost ?

if you bring passenger at the back I would recommend a pair of rear Improve Comfort abs. Been using stock a few times and I can safely say the rebound rate dropped significantly on the 3rd month. Changed to Improve, a bit stiffer but the dampening is superb. Still retain the original height. Last longer as well.

if not mistaken RM2xx , include the gasket. Just chg mine recently, but forgot the actual price.

I kena this before. Can't recall exactly how much it cost because I repaired my air-cond at the same time.

no wonder when i open the coil plugs, i saw some engine oil was inside the spark plug tube hole. i think we gotta keep that area clean all the time, else dust and small stones will go in and cause more leaks.

mine was around rm160 for the cover only from perodua..the gasket is around rm50 if im not mistaken..can refer to kelisa thread post by mikehwy
https://forum.lowyat.net/topic/2862488/+400

hi guys,

My aerosport kenari reverse sensors kaput... any recommendation to get spare parts and pricing?

thanks

Tommi88. TT session on this saturday night?

it depends on how many participants are there coming. if the headcount is too low, we may need to postpone it to another weekend again. T.T!

Guys,

are the wiper nut on the front wiper by default is exposed? mine started to rust abit and im finding the nut cover to cover them. saw some of the cars on the road have them. do you guys know which model is suitable to be used on our car? for the wiper nut.

Mine is exposed too. Not sure if it's default as I bought the car 2nd hand.

Mine got a plastic cap covering the nut. I'm thinking of dismantling the wiper arms for spraying coz mine also rusted already.

Yes, you need a cover to protect the nut rusting.
Our Kenari nut cover are sharing with honda jazz or city and suzuki swift.
Is a very famous stuff for curi and install at motorcycle now day.

Sorry, I was in Johor for the weekend. December's pretty hectic for me, lots of traveling to do.

i will go look for it at the spare part shop later. thanks!

I see. lets try to arrange something so that everyone can participate in the next coming TT.

Currently I have no plans for the 20th of this month. Anyone else free on that weekend?

that weekend im away to JB. sorry. hehe. how about 29th december?