No cold start problem. Just normal.

Anyone know how much is the kenari windscreen exchange cost ?
my windscreen cracked due to long duration on car engine vibration(due to engine mounting unfix).
sad... a lot of things need to service and change ad.
-windscreen
-engine mounting
-absorber

if u are on tight budget, just change the front engine mounting. cost me only rm60 plus if im not mistaken..reduced the vibration a lot..i would say the front mounting is the one that cause highest vibration from my experience..not the the rear and side..

This post has been edited by megat89: Nov 22 2014, 01:48 PM

sorry to bring up a bit old post, I'm wondering, what is stage one, stage two, stage three and etc referring to? Mind to explain?



I'm using ngk g power for around five years, running all fine, just make sure to get the correct code's spark plug, because different heat range by 1 can have big different. On routine service part, it last me around 40k km, using it just because the price about the same like standard spark plug, fyi the price I got for a set is less then RM50.

Thanks.

Yesterday i have called to P2SC
they quote me the price as below

front windscreen - RM550+-
Engine Mounting - RM1200+- (promotion -10%)
Front absorber - RM360+- (promotion -10%)
Back absorber - RM210+- (promotion -10%)

Total if repair/exchange with labour fee = RM2400+-

any advise from PRO here ?

Stage one is mild modifications like changing headers, exhaust, air filter, spark plugs.

Stage 2 is touching more towards engine internals like high cams, port and polish header, bore engine block and etc.

Stage 3 is more towards racing modifications like turbo charging and etc.

Wow! Where you got it so cheap?

Anyway, my car engine issue was solved. It was one of the coil plug was spoilt. Replace it for RM 190 a pop.

Prices in perodua service centre is higher sometimes but it is backed with 6 month warranty for workmanship if I'm not mistaken. Maybe you can consult outside workshop for price comparison.

I'm not sure about the windshield, but you should get the mounting done at P2 - the 6-month warranty makes life a lot easier. If you have any other engine work to be done, I suggest you get that done at the same time because replacing the mountings already incurs maximum labor cost.

As for the absorbers, you can get them outside if you want to. Most shops have the standard KYB ones in stock.

P.S. This is what I did for my car - cost me about 1k+ at P2, and another 1k+ at the tire shop to replace the absorbers+springs+brake discs+front lower arm.

This post has been edited by v1n0d: Nov 24 2014, 10:09 AM

hmm like that I will got for windscreen first because this is more critical.

engine one i will do it next time, cos my engine cap also leak oil. if want do together, i might broke.

I understand the most time consuming and most expensive to change is the front engine mounting. Is it correct ? Please advise. TQ

Mounting still ok if compared to replacing the clutch kit in the car. to replace the clutch kit, the entire engine has to come off the engine bay just to reach the flywheel and clutch. and the the processed is reversed.

the most time consuming is actually the rear..the biggest mounting..that one your engine has to be taken out..thats why the labour cost is high. but the front one is easy..only need to remove the bumper for access..the front mounting is about rm30 (cheap brand) if im not mistaken..and the labour is about rm30 also..very worth trying..

that rear absorber price is for one or 2 pieces?..if 2 pieces i dont think if theres much different with outside shop..my place if outside shop is around rm110 per piece..better u take the one from perodua..btw, perodua original spare parts for engine such as gasket, rocker cover, what ever engine parts, it is cheaper/affordable to buy from perodua..but things for undercarriage like driveshaft, lower arm, is super expensive..rocker cover from perodua is only rm160 something.. try go outside last time my experience changed at rm250 from outside workshop if im not mistaken..now leaking again and today i went to perodua to order..

This post has been edited by megat89: Nov 24 2014, 04:10 PM

I dismantled my meter this morning as there are some faulty light bulbs. They are very small in size. Wondering what codes are these bulbs? Anyone knows whether it is available in led type?
I mean the light bulbs for P, R, N, D, 3 & 2.

normally 2 types of bulb in kenari/kelisa meter..big one is t10..small one can use osram 12/1.2..if the gear light is small one, then most probably osram 12/1.2..can google to see whether same or not..

Greetings Jimmy,

For all the smaller bulbs for meter, you may buy this bulbs as i also bought the same one previously.

http://www.aliexpress.com/item/Wholesale-T.../612357744.html

however, for auto car may need to buy 20 pieces as 10 pieces is ngam ngam to replace all the small lights for meter panel.

btw, if u wanna replace the aircond panel to white LED, i can sell them to you as i got extra for it. come take it from me during TT session.

guys, shall we held our TT session on the following saturday night? it has been delayed quite sometime already.

This post has been edited by tommi88: Nov 24 2014, 06:46 PM

the absorber is in pair.

what is rocker cover ?
maybe i should snap some picture and ask over here

Hi Tommi

The small lights are labelled osram 12/1.2 at the back. Is this the same as B8.5 1led as per aliexpress advertisement? Will it fit into the back of the meter?

Jimmy,

If your bulb is something like in this link, then the one on aliexpress will definitely fit it.

Pictures are always good.

Hi guys,

Items for sale which is suitable for our kenari.

Item 1:
NGK G-Power Spark Plugs (BKR5EGP). Suitable for kenari/kelisa/viva/myvi 1000cc.

Link

Item 2:
60 pieces Automotive Toolset.

Link

Anyone interested please Whatsapp me.