the safest and only choice is to replace the whole valve cover as the spark plug seal is 'embedded' in valve cover. i tried to open up to replace the spark plug seal, don't think anyone can get it reassemble back like how it suppose to be.

conclusion, call it you're 'lucky' to owned Kenari because of need to replace valve cover and valve cover seal instead of spark plug seal and valve cover seal.

thank you very much for the advice bro. surrounding area very little, only that oil is leaking into the spark plug chamber, unintentionally flooding it slightly. even ran on 2 cylinders for awhile.

thank you for the advice as well bro.

So if thats the case, roughly how much does that valve cover cost? mech quote me about 500 siap pasang. which i know is exorbitantly expensive.
i checked online, its between 160-180 for the valve cover. i havent check at normal spare part shop yet. its that the market price roughly?
i dont mind diy myself to remove the plug seal, but afraid that it is impossible to do; thats why come forum and ask for advise.
the normal valve cover gasket is roughly 20-30rm iinm.
appreciate the help, thanks in advance yet again.

No more reply from sifu ? Appreciate any good advise. Thank you

Anyone here experienced water temperature going low n up again to normal once in a while?
No engine overheating problem. Not losing any coolant in radiator n spare tank.
Any idea?

you try looking around lor... budget it about RM 400 all in should be OK. Well, try to stick with just one mech rather than keep on changing and looking for new mechs... well, most important is a trustable mechs...

I think it should be the meter needle goes haywire d. I had the same problem too on not the temperature but the fuel meter... So long that it are 'up' on that level before, I know that there's still fuel in my tank. Moreover, I also uses my odometer to judge on my fuel=distance...

Today, my brake starts to have hissing sound already... checked and guess it is time to change the rotor disc... mine is too thin to skim d... Any recommendation on wat rotor is best to get ? Else, I will just go for new original ones...

check brake pad thickness as well. imho, all standard disc rotor is more or less the same, go for big brand will be the safest.

Hey bro, i replaced my rocker cover 2 months back which cost me RM 250 using original part and labour included. So far it has solved my problem of engine oil leaking to spark plug area.

Mine is due to replace as well. Im going to go for brembo disc as it is relatively affordable. By the way, i am using Myvi brake disc and calipers.

Anyone know the estimation price for front wheel bearing change?

O... just changed pad... and then hissing comes... see see, disc is thinning and also de original thickness and now had been thinning already... can see at the edge of the disc...

if 1 side, should be plus minus rm100 or less ? I can't recall already how much is the last round I changed... hehe...

slotted disc la!

Kenari auto year 2001
Rm10500

Mileage 104k
Mov body kit wif half cut from Japan.
Daihashu sport rims

Wife drive for short distance.
Leather seat ori frm perodua
Standard engine.

Hi guys, i own 2 units 2004 Kenari Aerosport. i like to ask about the Meter as the millage gauge seems not working and the fuel needle is not accurate anymore (it never show full tank even after i pumped full). To change the meter, i tried to look for it at spare part shop and quoted me quite expensive...>Rm4xx per set. any where i can get cheaper?

halfcut shop can get between rm100~150, a few design you get to choose; but if you're lucky enough, rm80 can get, but don't expect you will have much choice la. also put in mind halfcut mean mileage is not zero.

Thanks for your suggestion. am looking for it through my fren who have the contact of Half cut. waiting for his reply.
from what i know the meter had few colors, light blue, white, and aerosport orange/red, what else can be choose?

hi...i have kenari auto 2002. my prblem is;
cannot start when i drive about 10-20 min. i hv to wait 20~30 min to start again.
millage: 266k km
i`ll already change
new battery
new starter
new sensor

but the problem come...pening betul!!

Guys, just change my stock Kenari engine to daihatsu yrv turbo.. Any of u guys know what is the best absorber & spring that for my Kenari?✌

no crank at all? if no crank you can try changing the starter relay

if i drive about 10 min, i stop n try to start have crank but weak..

yesterday workshop man said this happen because my starter become to hot that why it happen. it is posible??

Hi all,
Would like to let go my kelisa 2006 GX (M), silver colour, any interested please PM

Hi, does anyone have kenari original steering wheel for sale?

i need 1 for my wife's car. as long as good condition.

Thanks