This is how it's look like.Can brain how it gonna fit?
U can ask the seller to test the arm rest before decide to buy.This is what i did


Inside.

Due to my left hand not doing anything.Decided to buy this for god sake and put my hand on top.After using for 4 months,reaching for handbrake is not a problem at all compare when it's installed.

why the V so special.

Today,when doing some sharp corner around 80~120.Somehow,my hazard light blinking & door indicator turn on & off repeatedly due to applying brake since i did install ABL.U guys should know how the ABL works.The funniest thing is,my door knob did not come up once.

FYI,it does not happen on straight road or smooth cornering.It will only occur when hard cornering.Im thinking either

Door sensor faulty?
ABL faulty?
Cornering force which transfer from either side?


This post has been edited by zukjka: Aug 18 2012, 04:55 PM

Can adjust myself for he door thingy?

That black thingy right?
Unscrew it adjust abit can d?

This post has been edited by zukjka: Aug 18 2012, 05:35 PM

I did on my roof lamp before when driving.Then,i press my brake pedal.The "thut" door lock sound will only trigger one time.This will happen everytime i on the roof lamp & press the brake pedal once.Will try & diagnostics.

This post has been edited by zukjka: Aug 18 2012, 05:57 PM

nono,i install from you quite some time d.

I adjust my door light into auto position.Everything seem normal when i open every single door and close it.The light will on when door open and turn off when door is shut.Refer to bottom pic,



1.when i adjust my door light from off to auto-->it wont happen.
2.when i adjust my door light from auto to on-->it happen in a flash only cabin.
3.when i adjust my door light from auto to on/on to auto-->it happen and my hazard light trigger around 10 second both cabin and oustide.

FYI,if 2 & 3 trigger.My door knob did not come up once,i can tap brake and then it trigger the ABL to lock.

Should i unplug my ABL & try?
Any ideas?

This post has been edited by zukjka: Aug 19 2012, 02:49 PM

Do i need to plug those cable back to origin after i unplug from the ABL.Sorry,because my ABL was install by some1.Damn confuse with those wiring.
What is the function of green+yellow cable,a bunch of black cable & colorful cable?


What is this?

This post has been edited by zukjka: Aug 19 2012, 03:26 PM

Simple guidance for future owner who want to install ABL.



My guess ABL is working.Even i unplug the ABL & try,the problem still there.Might further my troubleshoot
Thx zeone for enlighten.

This post has been edited by zukjka: Aug 19 2012, 06:56 PM

isn't the yellow & green wire come together with the black wire as 2nd pic red pointer?

If i dont open up the ABL,quite hard for me to unplug the alarm socket.This ABL was first install by someone.I tot this ABL come with only the module & no socket because i did not watch him install that time.


The green & yellow wires is it tap where i circle?

This post has been edited by zukjka: Aug 19 2012, 06:37 PM