welcome V3....

kenji1903 is 1 of LYT sifu...

haha im sifu... sure ...i dont think so...

last week when to genting.... push abit.... looking at the water temp info from scangauge average reading during hill climb 90c~96c with aircond temp to the coldest (to make the fan run at the max speed) till our themostat open at 96c.

yes the Themostat open to release cold water in to the engine to cool the hot engine and the hot water will go to radiator cool down.

Themostat

Not really testing just want to know if continue hill climb what is our car temperature can reach.... it was fun dint push much... at a stage before reaching Gohtong after some few hill climb during downhill the temp drop to 83c then maintain back to 85c~87c.... till the next hill climb....

power ok lah .... can easily overtake city....haha manual

cheap cheap only and dont need to mod just plug and play... so far it able to read from our ECU below list

Kilometers Per Liter
Kilometers Per Hour
Revolutions Per Minute (RPM)
Throttle Position Sensor
Water Temperature
Average Fuel Economy
Trip Fuel Cost (dint setup this function but it can be use)
Battery Voltage
Intake Air Temperature
Liters Per Hour
Ignition Timing
Engine Loading
Horsepower

and few more custom function.

im selling it ScangaugeII, you can use in almost any car with ODBII connector but some car cant be use.

i mean i got sell ScangaugeII new unit.

here is my ScangaugeII



Attached thumbnail(s)

few place u can install ....

For this ScangaugeII Price RM750 per unit
If Group purchase > 5 unit ... per unit will be RM 700

This unit is with X-Gauge function for custom use and able to read & erase error code.
It also have Performance monitor like 1/4-mile time, 0-60 MPH time, 60-0 MPH and Braking Distance.

no, it will not void any warranty as not wire to be splice during install. Depend on individual to take out or not during service.

try to run at 100~110 kmh and maintain it.... 1 tank can reach your destine

It can be done for auto as i try last time on my gf auto vios, 4 adult bonnet full luggage KL~Ipoh~Penang can reach 600+kmh during that time run on BHP95, tire pressure front 240 rear 220, engine oil Amsoil 0w30. Also can reach this mileage ....

You really a legend.... very good result you have....
selamat Hari Raya.... drive safely...

yes it may harden you can try Michelin ... you can have some sound proof it help abit....

got my air flow sensor clean last week and replace a clone OE filter .... FC improve....

i DIY also use CRC air flow cleaner....

great result.... for new car also can clean it maybe every 30k~40k as i clean it during this range, my FC maintain gooood ....

time to change to other brand...

Yes Amsoil ....hehe

why worried so much? now days car is not so easy break down...for engine And gearbox oil never never use engine flush it... the more you clean it the more problem will happen later....

Depend on how you drive... if low mileage or less use your car semi is good enough....last time semi i change every 3~4k and fully every 5~6k.... on toyota oil...

For flushing things.... dont ever do it on any engine or GB.... this will clean oil, dirt, micro size metal that been in our engine from the 1st day the engine start to life... if it able to clean fully but if not it will be cause other part to be damage.

Amsoil dont have gold it call Signature range 0w30 best of day to day use...


If a good Full syn oil why do we need use torco MPZ2? every full syn maker have their own blend if add torco MPZ2 in our oil to make it perform even better why in the 1st place they dont wan to make a better full syn beside at torco MPZ2?

still ok lah... for me i dont flush engine as it will harm more then clean more.... as our engine can last 200k~250k mileage....

other then flush is you can use carbon removal or engine oil with high cleaning agent....

yes this is about the list.... wah 5 years reach 100k mileage mine less then 2 years going to reach 82k mileage....