Any one, where to find an ANTI ROLL BAR for Vios? Please have a look at the pictures below:

From far, can see there's 2 linkage towards the end point of absorber mounting


Here's a closer look of the linkage


And clearly, when 2 P42 is in the same picture, it's pretty obvious the white color is not stock


Much appreciate if you're the owner of that white P42 to supply further info on where to get that thing. Do let me know if you wish to take down the photos. Oh by the way, I'm NOT REFERRING TO below:

Doesn't exist on any of those advertised. The 1 I'm looking for is clearly different than those available in the market. Thanks for the effort anyways.

I have no idea where that bar made of/from. I was driving sober and suddenly that P42 cut infront with a piece of equipment caught my attention. So, I don't know where to check. Thanks for your effort

Nevermind, just found out UR only advertise it under P42 category, not exist on 07 and latest 2013 model. Next question is, all 3 model of Vios having the same torsion beam? Can I fix it in a dugong?



http://www.ultraracing.my/catalog/index.ph...troller=product

Not Vios owner can be TS anot Planning to get a P42 or dugong

Its uncommon to have that setup. The commonly available u mentioned is this useless piece of crap



Compare to this 1




To you, may be there's no different, but I don't want my car to REDUCE G Enjoy the video on how to REDUCE G, pardon the colorful Engrish

Nvm la. I tot I just said I dont wanna reduce G U ask me which part I wanna reduce pulak

Rox,

Anti Roll Bar main function is to transfer OUTTER wheel lateral force(if turn right, left wheel is outter wheel), twist the force from going down INTO going UP for the inner wheel(in the same right turn, right suspension to be lifted up). In short, angkat kaki so the right side of the car will be glued ON the road surface. In that case, because of higher lateral force being transferred to the inner wheel, infact the higher cornering speed is applicable, hence lateral G will be INCREASE. I wouldn't want to decrease my G reading after all.

For your information, torsion beam itself is a twist bar. With or without an ANTI ROLL BAR, it will still twist.


Having a well designed anti roll bar, it will REVERSE transfer weight from 1 side to the other, to counter the torsion beam twist.

Do take note, the 2 pictures of product I've posted are totally different. 1 is bolted on the spring mounting place, another 1 is bolted with a linkage at the absorber mounting. I'm just saying, the 1 you said common anti roll bar, which indeed common among all UR fans is NOT what I want. I want the 1 that UR only posted for P42. On the other hand, to correct you an anti roll bar does not increase chassis rigidity. ARB is unsprung(situated below spring), so has nothing to do with chassis works. If you want to increase chassis rigidity, this 1 will because it's bolted between the 2 main chassis frame.



My ultimate question is, whether the 3 models of Vios share the same torsion beam. If yes, I can proceed to get the P42 anti roll bar UR produced, and install it on a dugong.

Cheers and no hard feelings please.

Go for 14" 175/65R14 Mybi saiz Cibaistone Blitz 1800. FC guding, moderate grip on both wet/dry. Above 36psi the best FC, but sked the car will fly. Usually I rather stick to 32 front 30 rear City drive arnd 400km/full tank. Full haiwei cruise constant 90kph arnd 600km/tank. 08 dugong E spek btw