welcome..just helping~
yup, reply TS!

thanks for the explanation

---

Added on November 20, 2012, 10:10 pmsorry, we dont sell any subtitute service decoder ,we only sell LNB and complete set dish and other astro accessories only

This post has been edited by zactitude: Nov 20 2012, 10:10 PM

I want to replace this dual output LNB on my old astro silver dish. Is it compatible? Please quote 1 unit to Batu Pahat, Johor.

PMed...........

Item received. TQ

can this dual output LNB be used to watch simultaneously with these 2 decoder config?:
a. decoder with HD channel
b. decoder with SD channel

currently with existing LNB, if either one use HD channel, both signal will lost.

Yes,This dual lnb is made for this purpose, tq

---

Added on December 19, 2012, 12:04 pmYes, this lnb is made for this purpose, tq


This post has been edited by zactitude: Dec 19 2012, 12:05 PM

nice. still hv stock? pm me details.. tq.

This post has been edited by seedee: Dec 19 2012, 06:07 PM

PMed.....

Item already received.
TQVM...

Dude is the Sharp Dual LNB compatible for my single lnb astro beyond? Still got stock? How can I know if a LNB is faulty? I don't get any signal from my newly open single LNB.

---

Added on January 6, 2013, 1:46 amyes,compatible and stock ready......LNB is faulty or not can only be check and confirm with a satellite meter, before assuming the LNB is faulty pls check first the coaxial cable is proper connected to the LNB or decoder with no short circuit between the screen body and centre coil, switch off/on the decoder main power to reboot and check again the signal strength

This post has been edited by zactitude: Jan 6 2013, 01:46 AM

I have tested the coaxial cable by connecting it to my neighbor's astro lnb, and it just work well. My beyond decoder can lock the signal. But when I plug it back to my lnb, it just do nothing. Not even showing any sign of signal and stay unlocked. My thought if I just install the dish inside my house, and got it pointed to the right angle, shouldnt it be receiving signal or maybe at least a little? Correct me if I'm wrong. Tq

you should get the signal by pointing the right angle but make sure there is no awning or anything block on top the dish.

Item has received perfectly n 100% working..thanks bro

Good morning..i think yr dish supposely put at outside whitout any object obstacles between the dish & LNB.even a leaf at your dish could effect the signal..my 2cent & it happen to me last year

thanks for the support,,,,

Well I did that by installing the dish on the roof top. Point it to the sky, adjust the angle just like the others and connect the coaxial cable directly to the decoder. But I'm not getting anything. So I unplugged the coaxial, then connect it to the other dish, as I said before, the signal locked successfully. So could be me wrongly adjust the angle or the LNB faulty. But are there any cases where the LNB is faulty on the box?

Err.. I meant to reply on jai_sg quoted.