Coz most of the active PREVOC members are posting in this thread.

most of active prevoc member are in fb...lyn also become less n less...

anyone tried ron97 and how's the FC? how many % better?

Actually I'm not that active in FB as well. Its just that most of us the vets in this thread already sorted out their car issues. Just helping mostly the newly joined forummer while focusing more on the club matter. Huhu

got the accident fb link?

checked with icare.

why? u wanna make collection ah?

---

Added on August 8, 2012, 8:25 pmu always have me here...

This post has been edited by fulat: Aug 8 2012, 08:25 PM

yaya.. haha...
really scare my preve kena kiss

yeah lor scare me also... i thought sure full of blood. at then end...dont even have a drop

this proves that preve punya chasis strong.
boleh bagi link ah... use pm also can lol

This post has been edited by edwinkbs: Aug 8 2012, 08:31 PM

There is a 1cm scratch at my preve bumper. COSE said needs 2 days to get the repaint work done on whole bumper & the color might not 100% match with the original one, WTF. No idea why they can't just touch up the scratch part.
I din go back to COSE today, dun waste my time & money...will fix at other carshop.

---

Added on August 8, 2012, 8:52 pmI had tried Shell, BHP, Petron, & Petronas...so far Petronas gives the most KM follow by Esso/BHP, Shell.

This post has been edited by wewanwang: Aug 8 2012, 08:52 PM

plus minus almost the same. with normal ron 95 travelling speed around 80~90kmph will get around 480~500km per full tank of RM85

for ron 97 around 510 ~ 520km but better power. same speed it will be around RM115 full tank.

60% highway 40% city

Just a quick update on my "ordeal" with COSE
Finally got my car back today.
1 - repaint is done. Was hoping the bonnet will have a clear surface but now noticed that there are swirl marks all over it. Guess they must have polished it the wrong way? Have to pull out Meguiar Swirl X again...
2 - cant really tell if they have applied any sealant (but they claimed they have) and did not have the road to test out for wind noise
3 - believe I can still hear it and I doubt the SA understood my complaint in the first place...
4 - no more noise from the rear suspension -> they said they have tighthen the suspension...
5 - 5k service done -> requested for 10w30

In addition to the above, they have also made adjustment to the driver's side power window panel, now no longer bulging upwards when glass reach the top but seems expanding side way.... anyone who has got their power window panel adjusted can confirm this? i.e. expanding side way.

And also the side mirrors are more in sync when folding/unfolding. Driver's side is still a tad slower than the left.

That's all.

Me too. Seat's fabric seems not up to par. The less blinking bit should be due to your installing a VS.

Goes to show that Preve has a strong body
Hard to imagine what it'll look like if that's a Wira.

On another note, I had my reverse camera fitted.



This post has been edited by BartS: Aug 8 2012, 09:37 PM

Well done, bro. How much you ordered from Ebay & whats the item specs?

Murah sahaja. Free postage but takes about 15 days to arrive.

---

Added on August 8, 2012, 9:47 pmCan explain this part a bit?

I tried to DIY fix mine. Opened the door's panel but couldn't figure out which part to bend. In the end, stuck the screwdriver in and bend here/there sikit-sikit. Pasang balik and spray silicone spray onto the rubbers. Now okay liao. Still bulges but no more sound when window going up/down.

This post has been edited by BartS: Aug 8 2012, 09:51 PM

i no see any selection on our HUD about got reverse cam, how they did it?

When you select reverse gear, it powers the camera and sends signal to the HU to switch input from camera.



This post has been edited by BartS: Aug 8 2012, 10:00 PM

Bro, mean only order this SONY CCD enough? need to drill hole or not?nite time clear or not?thanks.

Well before they adjusted it, whenever the glass reaches the top, the whole power window switch panel would be bulging slightly upwards. If you rest your arm on top of the panel, you will feel the panel is pushing upwards.

And now after they have adjusted it, it's not pushing upwards anymore but expanding/bulging slightly from the side.