I think his are performance RAMs, that's why can hit such nice clocks I doubt UCCCs on value RAMs can do the same

haih....may i know where still can get value series UCCC?

no, is Corsair Value Select.....

tonight i post up print screen....

Woa ... You serious? DDR500 @ 2-3-3-6 is very good for UCCC based RAMs

manyak jelesla ini macam...ok, i'll try mine at DDR500, can or not at 2-3-3-6, pretty low la for VS punya ram, anyway, mine now at DDR500 3-4-4-8 1T @2.6VDimm oni.

hahaa...sms u so many time dunwan sell uccc for me.no choice grad corsair pro series.nop bad.can do 275 3/4/3/7 at 1 T timing.

nah, i love my UCCC,only sell it to who willing to pay more...RM350 onwards (i hope no one).
u get urself pro series, how much n wat version?

i get rm350 pro series it is led version brand new.1024 512x2.it is ver 5.3...promoschip i think.i love this ram 2

anyone using GSKILL F1-4000USU2-2GBHZ PC4000 (2 X 1GB)??

i can only push it to 255Mhz at 3-4-3-8, 2.6 VDIMM.
i cant go higher than that.



some one said to me tat i have to burn in first.. is it true?
how to burn in? using PRIME is it?


thnx~!!

mine can get 260Mhz, 3-4-4-8, 2.6V, 1T

just now i changed the ref clock to 250 Mhz.
but when i do the Memtest it says.. the ref clock is still 201 Mhz.. y is that happen?
also said the same thing in cpu-z/.. aiseh

load setup default, save and exit, shutdown, turn on, place ur setting back..

I saw only 1 Intel platform here using the UCCC RAM.Erm...is it that UCCC is not really prefer by Intel platform due to their chip ?Guess UCCC and TCCD also not really popular ifor Intel mobos.

I need some help here regarding a new RAM tat i get to fit in my DFI Nforce 4 Ultra D.

My ram is exactly the same as the pic in the first post, the only different it is APACER brand.

Ram details : APACER 1GB PC3200 CL3 double sided (with Samsung K4H510838C chip on it)

My present computer already got Corsair 2x512MB PC3200 CL2.5 RAM.
But when i plug in this single stick on my board it seems cant boot.
I already tried put this APACER ram on board stand alone on every slot ( means i took all both of my Corsair ram) but it still cant boot up.
And i tried it too put it in any of the ram slot while both of my corsair ram is already plug in too.

3rd test, i tried it with slot 1 512MB corsair n 3rd slot with 1GB apacer or even do it opposite way. but still cant boot up

Both way also cant boot up, the question is
is it bcos of dual channel matter? As i dont hv another 1 GB ram to test it.
or is it bcos of APACER 1GB this ram is not compatible with DFI Nforce 4 Ultra D motherboard?

Hope some sifu out there can help me. Thank you

if u already tried only the apacer ram alone with bios set to default, n maybe manually set loose timing with higher voltage n still failed, off to RMA it goes (or try on someone else mobo before hand)

This post has been edited by e-jump: Jul 2 2006, 10:04 AM

new menber for UCCC chipset

If you're using 512MB modules, why do you buy UCCC? Should have gotten TCCDs.

Gotten my pair of KT VR to run at this speed ..

didn't Prime it overnite but normal usage & gaming was fine ..

However, this same pair CANNOT run at this kind timing on my Venice 3000+ 939 & Asus mobo

w00t~~!! not the best OC by any means but i'm EXTREMELY happy with my 2 x 512mb apacer UCCCs!!
At 2.55vdimm



This post has been edited by AREA51: Jul 19 2006, 10:56 PM

Definitely something isnt rite. Probably CPUZ isn't reporting the correct timings