Nope.... im 1st .....

kene thread lock by admin edi cannot copy the BB code.... demmm have to recreate lols.... see 1 hour no one create the thread so i create the thread lor..

afoz jgn mare yerrr

Anyone encounter idle not stable when air-cond on? Keep revving between 200-800 rpm, so sometimes like engine gonna die... Any idea which part faulty? Not interested in adding FICD if possible... Thx...

Original got FICD meh?

Mine is 4g91... About resetting the step motor, mind to explain more? Don't understand "put on ground before start"... Thx....

Once you have converted to a manual, welcome to the world >200km/h

Afraid is one thing, experience is another thing
If you are so afraid, why go fast in the first place?

---

Added on August 12, 2012, 2:54 am

If you have speed cut, you are not running with an original proton engine
Proton engines don't have speed cuts, they have rev cuts

Does the steering feel got free play when moving at a lot small2 rock? Does the steering feel like not solid enough?
The probably is the steering rack problem.

The klok klok sound is because some bushing already worn out. Maybe is lower arm bushings, or steering rack bushings, or tie rod end.
Almost done with the engine installation?
What does piston ring sounds like??
Your throttle body bottom part gearing need servicing or replacement.
When cleaning the throttle body, do they take out and clean the gearing and apply new grease?
The new myvi? Old one if not mistaken top speed only 160km/h
It should be always in the middle. Thats the optimum operating temperature.

oh no.. i no have shhhhh sound O.o

Sometimes mine also don't have. Maybe it depends on the weather and surrounding pressure physic related stuff?

It is a normal sound, so open slowly for the pressure to even out less dramatically. Can also ask the shop to check the tank vent valve if have it.

hi...newbies here...

got TT mea?

Been talking TT for so long lioa...haha

i wait here la for u to come...

i can gather a few more boost gang...

yesterday sent my wira to service oil leaks and aircond pulley

can sifu here see whether i got kena potong kepala anot :

power steering oil change - RM120
Valve cover gasket - RM25
Distributor oil seal - RM65
labour for oil change - rm5
---------------------------------------
total rm215
======================
aircond fan motor - rm195
recond aircond clutch pulley - rm60
shaft Bearing - rm18
clutch coil - rm68
fan belt - rm10
aircond gas and labour - rm25
----------------------------------------
total rm370
=======================
grand total - rm585 

anyone wanna C.A.K?urgent selling

Chassis alignment kit

Kenot meh 

My family also got Wira, but in Ipoh lar

no mood n money liow to work out..... even wan to work out i planned to get 4wd edi coz FF had very big limitation when you touch 400hp above...

forum not about fixing mah..... this thread is about social life mah.... can chit chat here n tok cok mah hahaha...
Syiyau also quiet edi.... all went to Preve thread