Just find any adapter >.< as long same voltage but make sure the watt rating does not differ very much. Just go to the electric shop and ask for a 12v adapter >.<

Mine cooler master X1 fan changed with 12V cooler master fan lagi umph ...but then got a lot of dust

---

Added on June 10, 2010, 11:17 amOPS .... I read wrongly LOL

My one the chapalang brand >.<
Had tried using other modem adapter no different at all

This post has been edited by devilish_yin: Jun 10 2010, 11:17 AM

Both got pro and cons

For me I go for angled since the laptop height is a problem for me.

At least yours is smaller than mine >.<
Maybe can use the adapter for IDE/SATA to USB adapter 12V rating 2 A lightweight but.... cable are long and take up more space ....

RM10-20 for me XD Universal Adapter
Better If you can salvage those unused adapter

wahhh so EXP ..... I think I get mine at RM15 >.<

Now thinking of modifying my current cooler .....

Cooler Master X1 base
Fan Long Life Cooler Master Fan 2000 rpm at 12V [Blue]

This gonna be EXP to modify the current setup XD
I wan to ask Is it better to blow the air to the base or suck the air out ....
Since the X1 factory design are supposed to blow the air upward .......

My lappy running at 24/7 most of the time ..... need it to be more cooler

Too true XD

Last month the fan was positioned to blow upward .... 2000rpm everyday
1 week the pad already showing visible bunny dust >.< scared all my laptop hole will be filled with dust.

Now it is positioned to suck the air downward at 2000rpm ...... the tradeoff is very obvious my keypad seem warm at 45-50 C last time it was cool enough ....... add more fan or increase the blow out hole for the fan

Okay will post it ASAP

Actually there was no Major mod to the cooler base. Thinking of making the fan hole bigger ....
Just added some lighting and change the original CM fan with the 2000rpm CM fan and using power adapter.....

Blue LED are really payah to find ...... I mean those bright one ..... found some super bright red LED and it is very cheap >.< ~!! and I mean really cheap XD

Here the picture as promised ...... haven't finish though no idea where to squish another fan on it~


Everyone are welcomed to give me idea to mod this thing.

Hmmm thinking of adding more fan on it with a switch control >.<

the problem is clearance size ..... thinking of finding those blower fan

Found a blower fan in an old P4 machine



hmmm can fit or not ..... GTGTW

70 over aaaaaa Crazy woooo mine barely below 60 rarely it exceed 60 without my fan with my fan lower than 50.........70 aaa seriously ....what laptop you using ? is it a Compaq?

try this one lets compare >.< using this one cause automatic detect heat sensor.....

http://www.cpuid.com/softwares/hwmonitor-p...ns-history.html

LOL must be the other software go haywire >.<.....

hmm are there anyone who know where and how to acquire High Powered LED ...... better light whole thing up ..... >.<

and anyone got idea how to block the annoying led ray ...... I wan to spread the light out ....

~The blower fan .... so old need to service it ... making too much noise XD

Already using 12v power adapter la .... why 5v .............. no power supply bro power adapter la

I mean the red LED ray so strong that it pierce my eye kacau me animeing So I wan to disperse the light evenly or block the strong ray ....
And I found some AllanGap marvellous work in the forum and saw his mod with a High Powered LED ..... that why suddenly got interested with the LED

http://cid-1eafc7a3f088c2e8.skydrive.live....88C2E8!142/

cannot lerr ... the light wont disperse backward .... already tried that .....

Wondered how AllnGap managed to light up that case >.< so syok~!!!!

Portable Cooler >.< hahahaha
can place anywhere can cool our hand if sweat during gaming XD

240v seriously table fan?

LOL never realize that >.<

How much did you get the AC Fan ? Powerful? Noisy ?

....The blower fan ...is a no no in the end too slow and big ...need to cut my pad somemore ...
Found a 4cm Fan quite powerful suck all my adapter current and all my LED are dimmer after increase the LED number to 6 ...
Guess I need to upgrade my adapter . But then 4cm ngam ngam ....can fit in my pad. Planning of making a backside vent hole using the 4cm fan.....

cockroach trap + mosquito trap

Wow quite useful la your fan

While mine only sometime catch those kumbang then ######

CM 90cfm is not too good to use for cooler pad .. 3 died on me oledy .... IMO noticed after 3 died ~_~ ..since the cm use sleeve bearing ..and we mounted the fan at an angled position ..the bearing just cannot tahan ... 3 of my fan all die by the same way ..fan stuck ..so I suspect the bearing

and it a waste really getting an led fan for a cooler pad ...once u put the laptop onto it ..nothing comes out ..I'm talking based on my experience ....better buy some led and DIY hahahaha

plus once u installed a high flow fan ..make sure u have some 10mm clearance between ur pad and ur laptop if not the fan would be struggling to push the air out ...or if it sucking in make sure the backside have some clearance also ~ adding some pad would help alot