Hey guys, just a quick question to anyone who has encountered this... well, don't know if it's an issue or not yet.

The POTS light on my BTU (the white Alcatel model) just lit up for no apparent reason. Now I know when you pick up the phone, the POTS light will be lit up, but my phone is NOT connected to my BTU, not a single phone is.

So it's very weird that it is lighting up now.
Only thing connected to the BTU is my router.

Never happened before until 10 minutes ago. My connection even went down all of a sudden for no apparent reason.

On Unifi BIZ btw. Have already restarted the BTU and router a couple of times as well.
Any suggestions?

Thanks in advance.

username: admin
password: (blank)

you can call TM and they will give you the password. Make sure the person who calls is the registered owner as there is a verification process

if you have 2 different accounts for BIZ and VIP .. theoretically you can share the same uplink to perform the authentication.

One modem is enough...refer to klseet.com.he got one unifi and p1 fibre use one modem given by tm

My bet is VDSL port is assigned with 5M speed profile for HSI regardless the attainable rate are much higher

Hypptv running on different VLAN which is with different speed profile

If you see your modem sync at 35Mbps Downstream /25 Mbps Upstream

Hypptv is 10Mbps from 35
You can check by installing PRTG and set SNMP at your router and you can see total bandwidth used for each vlan

Here one of the screenshot I've made to test HyppTV channel bandwidth, you can see the increase of bandwidth its due to changing from SD channel (Around 3Mbps) to HD channel

I have a question to ask;

Currently I'm using Streamyx 4mbps with monthly charge
of RM140.

Thinking to upgrade to UniFi VIP 5 with RM149 monthly.

That's just RM9 with +1mbps in speed.

So my question is, is it possible to transfer my number
that I'm using right now from streamyx to unifi?
Or must I apply for new tel no?

Thank You.

Is it possible to ask a TM Unifi technician to see if there's any extra charge incurred that will happen during installation before asking them to install? ( eg.the wire is longer than 15m..)

Hi All,

for TM Unifi my house is DIR 615 G2, can i upgrade the firmware using http://www.dlink.com/us/en/home-solutions/...ss-n-300-router v9.02?

i login into my DIR 615, it shows v7.15, revision G2

Thanks

what is the username is password for unifi router?

The default username/password combinations for TMnet DIR-615 routers between firmware versions 7.01 to 7.05b are :

Username : admin
Password : <blank>

Username : admin
Password : telekom

However, there is also a secondary account which must have its password changed in order to fully secure your network :

Username : operator
Password : telekom

Username : operator
Password : h566UniFi

Username : operator
Password : <your Unifi username in reverse order>

Firmware 7.12 and above :

Username : Management
Password : TestingR2

I need your favor here. How to unsubscribe channel on IPTV? It's auto subscribe. I take only channel Universal HD which is RM9/month. But now I subs for RM30.

Hi guys.
Anyone came to this experience before where unifi technicians came to your house. Check your connection and say that the router and black box is over heating. Causing the phone to have a not smooth conversation.  Plus the speed will never achieve more than 60%.
After advising the fella ask me to buy a cooling fan. But this problem started since the first day of installation.  Duh..

lol....noisy or not?

my modem is tower type..no need cooler..
oni thing is my router whether wan put cooler or not..

Is there any problem with http://occ.unifi.my?

I can't seem to access right now...