sandrock no bootleg yet.. and the gold part is exclusively to Daban.. the yellow gold is the original bandai

Zoids or SD interest???

Here is my 100% completed SD GP03D with it custome made decal.

[attachmentid=3069067]

U need a plain paper of water slice decal- (transparent based or white based). Design your artwork in Illustrator, print your artwork in paper first to test it, see can fit in or not. If everything OK, u can print on your decal paper. Of cos, decal paper also got Injeck or laser printer type. It depand on your option. Print it on the decal paper, let it dry, Then u need to topcoat to protect the Ink drop after u soak in water. after topcoat, wait it dry & cut off the decal u want. Soak in water for 20-30 second, apply it with wet cotton butt. Then wait & let it dry.

after finish applied the decal in your gundam, u need Mr Mark setter or Topcoat to protect the decal. It done.

BTW, GG strike luncher & sword r good for beginner.

more?

Progress so far



Cheers,

yeap, daban's latest release

yes.. there's both 00Raiser and 00 7 Sword.. i mentioned Daban just released them earlier.. both units come with 5 LED

can close but the china molded ones are a bit hard to remove.. especially the one in the chest.. however the china ones normally last for quite a long time
i forgot when i got my 00 Raiser.. i think 2 months back? the LEDs are still lighted up although quite dim.. i already removed them though but i never switched them off, just left them on my table.. 4 out of 5 is still working not sure how much the original ones cost though, but this is a pretty good alternative that last for quite a while
too bad i never quite liked the LEDs

it's best to avoid putting seller's names here.. this thread seems to be under heavy watch.. best to not say anything about buying and selling.. if you have to.. keep it anonymous

good selection but i have not heard many good things about titanium unicorn.. not the kit itself though, just that the titanium finish does not look very good.. i personally have not seen it myself, but i have heard quite a bit of complaints.. maybe if it's not to your liking you can put it aside to repaint later chrome silver or white spray paints are very easy to find

just take a spray can and spray i still have not ventured into airbrushing and all that.. now just paint big parts.. not so much detailing
for small detailing i use markers.. like Sharpie, Monami.. those simple markers u can find in the bookstores no need expensive gundam markers

Yup. Printer only support CMYK or RGB. for white decal i need to buy from MG type.

for simple & good effect, all u need is Topcoat. U just spray the topcoat on your plastic, it become matt finish, & topcoat paint r hard & not easi to scar or drop. Save money, save time for masking + can be used for water decal finish.

actually they got 2 type metalic.

The red color u saw in 007S r candy metalic. Which it coat with silver as based color, then it apply another "Clear Red" (semi trasparent color) to make the effect.

Metallic red, actual r abit dark with a bling bling (silver) powder inside the paint.

I asume u r talking about the Candy Color. U can get (no much option) it hardware shop, like Anchor spry.

[attachmentid=3071718]
Candy effect= u can buy candy paint /spray (limited option) at hardware shop...or
                  = U can use silver as based coat, then follow "CLEAR COLORS" (Airbrush). With this u can create your own color.
Any question, U can refer the link provided by ngcheechong above. & write your problem in the thread. This is thread for CHINa Pla-mo.
TQ