1st try at night shot using auto. OK la, not bad, the noise kind of minimum as it is auto ISO at 640.

This is G version camera. (rumors from Sony sensor).



* Next time I will try fixed ISO range, see how the result.

This post has been edited by Andrewtst: Jul 13 2012, 11:28 AM

ngkhanmein,

why dont u download the apk and transfer to your phone, install, hopefully will replace flipboard and solve your problem.

andrew, thanks for the info on BEWeather pro. still not familliar tho.

nice one bro.



here's my night shot during euro last time at mamak. haha
seems not bad too



This post has been edited by Long88: Jul 13 2012, 11:29 AM

Yeo! it was nice!

Next time I want to fixed the ISO, auto to 640 a bit high, I belive lower down will remove all the noise.

This post has been edited by Andrewtst: Jul 13 2012, 11:31 AM

anyone got good suggestion for a flip case that can see caller ID and also take calls with case closed?

This is really nice without any noice.

Still got some if you seen carefully in PC. Hard to notice in phone..haha

i thought my screen got dust, keep wipe but the thing doesnt go away, then only realise is the slight noise

Haha! need manual ISO next time, ISO 640 is a bit high, even normal DC some also noise.

This post has been edited by Andrewtst: Jul 13 2012, 11:38 AM

Finish download wanamLite base on Malaysian latest stock firmware XXBLG1.

Is time updating now.

Edit: Shit! not complete!

This post has been edited by Andrewtst: Jul 13 2012, 11:40 AM

hmm how to check is it sony or not?
or latest s3 all now are not with s3?

welcome

yea
i flash that rom
use hellcat KTool to dump the current kernel
then i got the kernel lolz

should try to look into some sort of places so i can dl n put there

normal

normal

http://forum.xda-developers.com/showthread.php?t=1724124

Cam firmware versions can be checked by typing:
*#34971539# and then Phone/CAM FW Ver Check

If it start with G, rumors is Sony sensor, if start with Z, rumors is Samsung sensor.

** It just a rumors, nothing proof on it.

---

Added on July 13, 2012, 11:44 amKtool working for S III already? previously I check not working. I go check now.

---

Added on July 13, 2012, 11:46 amJust check, yeah it start support S III, thanks for the information.

Now I can backup the EPS.

This post has been edited by Andrewtst: Jul 13 2012, 11:46 AM

i also downloading firmware in kies now upgrading ....already 1 hour not yet complete . hope after upgrade can fix my hang & auto restart problem . and also the notification sound problem . i won't direct send to RMA , coz after reading alot lowyat forum guru posting , our SAMSUNG service centre very bad service . so hope god bless me .

lowering yr iso will only result in darker images.

this is because the hierarchy in selecting the settings for auto mode follows this path:

set shutter speed to maximum 1/17 sec > exposure not enough? > bump iso till desired exposure

hence, by manually setting yr iso, let's say iso 200 to reduce noise, yr image will come out darker by around 1.5 stops.

if u want lower noise with same exposure, switch to night mode in scene mode.

then the maximum shutter speed will be increased to 0.5 sec (careful handshake).

i use night mode for my posted photo.
but it will have a lot off noise if shot in very low light

Sry for noob question, how to set shutter speed on s3?

Tried to update the new firmware via Kies today. Tried twice and I get the same error.

After finished download 100%, it rebooted my phone to the rom update mode. After like a few minutes, Kies informed that it cannot recognize the phone. I have to remove the battery and luckily still able to boot properly.

Deleted

This post has been edited by Godz89: Jul 13 2012, 12:08 PM

ooo

credits to waveweaver lolz