Jul 8 2012, 10:09 PM, updated 5y ago
Get A CIOKS Power Supplies.
Here are the models,
1) Cioks Baby Match
The smallest power supply for effect pedals from CIOKS with 5 outlets. All outlets are with well filtered, regulated 9V DC. The small size makes it ideal for smaller setups or pedal boards. Red LED indicator shows status of the first 9V DC section on outlets 1-4 with a total of 200mA. Outlet 5 is isolated, also with 9V DC and yields 100mA. Green LED indicator shows status of this last outlet and also here will warn you about overload or short circuit. A glance and you know everything is all right.
Features:
small size and weight
great for small boards with standard 9V pedals
possibility of connecting a positive GND pedal such as ex. OctaFuzz, Soulbender or '69 pedal from Fulltone or Proctavia from VoodooLab
possibility for connecting an 18V pedal using the Stack Flex
great selection of Flex cables as accessories
two LED status indicators (one for each section)
overload and short circuit protected
durable
2m mains cable
5 Flex cables included
Specifications:
Outlet 1-4: 9V DC / 200mA total from all 4 outlets (regulated)
Outlet 5: 9V DC / 100mA (regulated)
Size: 100x60x40mm
Weight: 420g
Best price, RM 350.00
2) Cioks Big John
Bigger power supply for effect pedals from CIOKS with 7 outlets. All outlets are with well filtered, regulated, common ground 9V DC and yield a maximum current of 600mA. Good choice for a slightly bigger setup or board, but with no exotic pedals with non standard operating voltage. Big John is able to supply the Mod- or TimeFactor Eventide pedal, Alesis FX or Octavius Squeezer from Chunk Systems, just to name a few higher current 9V DC pedals. A few pedals from Moog also need 9V DC with a quite high current, where the Big John would be a good choice.
The red Power LED shows if the power supply is connected to mains. The green Check indicator warns you about overload or short circuit. A glance and you know everything is all right.
Features:
great selection of Flex cables as accessories
two LED status indicators (Power and Check)
overload and short circuit protected
durable
2m mains cable
7 Flex cables included
Specifications:
Output voltage: 7x9V DC (regulated)
Output current: max. 600mA total from all 7 outlets
Size: 130x75x40mm
Weight: 550g
Best price, RM 390.00
3) Cioks Schizophrenic
Power supply for effect pedals from CIOKS with 6 fully isolated outlets. Here there is no risk of noise caused by ground loops or other possibility of different pedals disturbing each other. All 6 outlets are well filtered and regulated.
On outlets 1-5, with a small switch on the bottom of the enclosure, it's possible individually to choose between output voltages 9 or 12V for each outlet. For example the older BOSS pedals designed for not regulated ACA adaptors or some of T-Rex' pedals sound better when powered with 12V instead of 9V. A higher voltage is also improving the dynamic range of an effect pedal. On the last sixth outlet there is a possibility of either fixed 18V output voltage or adjustable by a knob on the side of the enclosure in the range 4-14V. The 18V are intended for Wah or the big MXR pedals. The adjustment feature will find different applications. You can use it to simulate dying batteries or give your overdrive an extra boost. Together with the Stack Flex cable you have the possibility to power a pedal with a voltage in the range 13-26V. You should check the manual or contact the manufacturer of the particular pedal before starting to experiment with voltages higher than the standard 9V to avoid damage of your pedal.
A high-bright LED status indicator for each outlet warns you about overload or short circuit and in an easy way always shows you that everything is all right just by looking at the power supply. If a faulty situation should occur you know where to find it.
Features:
all 6 outlets fully isolated, regulated and well filtered
outlet 1-5 with either 9 or 12V
outlet 6 with either fixed 18V or adjustable in the range 4-14V
possibility for connecting 24V pedals with Stack Flex
great selection of Flex cables as accessories
6 LED status indicators, one for each outlet
all outlets are overload and short circuit protected
durable
2m mains cable
6 Flex cables included
Specifications:
Outlet 1-5: 9 or 12V DC / 75mA each (regulated)
Outlet 6: 4-14V DC adjustable / 60mA or
18V DC fixed / 40mA (regulated)
Size: 130x70x40mm
Weight: 540g
Best price, RM 490.00
4) Cioks DC-8
DC8 is a professional medium sized dedicated multi-output power supply for effect pedals. It has 8 regulated and well filtered DC outlets configured in 6 isolated sections. With a total of 1.000mA it’s a perfect solution for small or medium size rigs with pedals only using a DC power source. Its two powerful sections with 300mA each will power pedals like TC Electronic Novas, Eventide Factors, the digital BOSS or Electro-Harmonix pedals or others which draw a higher current than 100mA. The first 4 isolated outlets offering 4x100mA are ideal for 9 or 12V pedals needing less than 100mA. Combined with the included Stack Flex the DC8 will also power your 18 or 24V pedal.
Features:
8 outlets configured in 6 isolated sections
high efficiency toroidal transformer
2 powerful DC sections with 300mA each
short circuit protection of all outlets
advanced LED monitoring of each section
120 or 230V mains voltage operation
detachable mains power cord
a total of 11 Flex cables included
Split Flex and Stack Flex for 18 or 24V pedals included
mounting kit for pedal boards included
durable steel enclosure with 2mm thick top
NOW SHIPPING!
Specifications:
Outlet 1-2: 9V DC / 100mA each
Outlet 3-4: 9 or 12V DC / 100mA each
Outlet 5-6: 9 and 12V DC / 300mA
Outlet 7-8: 9 and 12V DC / 300mA
Size: 146x88x35mm (excl. rubber feet)
Weight: 0,9kg
Best price, RM 850.00
5) Cioks AC10
AC10 is a member of CIOKS professional range of dedicated multi-output power supplies for effect pedals. Its two powerful AC sections with 800mA each offer voltages 9, 12 and 16V AC. If you have one or two pedals in your setup, which requires an AC power source, AC10 is the right choice. It powers all vacuum tube pedals from Electro-Harmonix, Kingsley, older Blackstar HT series, the Whammy or JamMan from DigiTech, Tube Rotosphere, Tubeman, Tube Factor or Replex from Hughes & Kettner or EBS Valve Drive just to mention a few. If you only have one AC pedal, you can convert one of the AC sections into a powerful DC section offering 600mA with voltages 9, 12 and 15V DC. The first 4 isolated outlets offering a total of 600mA are ideal for pedals using 9 or 12V DC at lower currents op to 200mA.
Features:
10 outlets configured in 6 isolated sections
toroidal transformer with additional magnetic field shielding
2 powerful AC sections with 800mA each
9, 12 and 16V AC available
one AC section convertible into a 600mA DC section
15V option for Radial Tonebone pedals
short circuit protection of all outlets
advanced LED monitoring of each section
temperature monitoring
120 or 230V mains voltage operation
detachable mains power cord
a total of 16 Flex cables included
Flex cable for Electro‑Harmonix vacuum tube pedals from included
one Split Flex and one Stack Flex for 18V pedals also included
mounting kit for pedal boards included
durable steel enclosure with 2mm thick top
Please have a look at the document CIOKS 10 - Professional range featuresfor more detailed explanation of some of the above features.
NEW!!!
Mounting of CIOKS AC10 power supply underneath Pedaltrain is a step-by-step do it yourself guide on how to attach the AC10 power supply underneath a Pedaltrain pedal board.
The older document CIOKS 10 - Pedal Train attachment shows how to mount the similar size DC10 power supply on top of a Pedaltrain pedal board.
Specifications:
Outlet 1-2: 9V DC / 100mA each
Outlet 3-4: 9 or 12V DC / 200mA each
Outlet 5-6: 9 and 12 or 15V DC / 600mA*
Outlet 7-8: 9 or 12V AC / 800mA*
Outlet 9-10: 9, 12 or 16V AC / 800mA
* only one of these two sections can be used
Size: 158x98x35mm (excl. detachable rubber feet)
Weight: 1,1kg
Best price, RM 920.00
6) Cioks TC10
TC10 is a member of CIOKS professional range of dedicated multi-output power supplies for effect pedals. The Danish company TC Electronic is very popular with their Nova pedal series for guitar players and TC‑Helicon VoiceTone series for vocalists. CIOKS TC10 power supply is with its 10 regulated and well filtered DC outlets configured in 8 isolated sections specially designed for musicians who are big fans of these TC boxes and is able to power four of them alongside with standard 9V pedals. Three sections offer 300mA each and the last yields 400mA with voltages 9 and 12V available. The first 4 isolated outlets offering 4x100mA are perfect for standard 9V battery operated pedals.
Features:
10 outlets configured in 8 isolated sections
toroidal transformer with additional magnetic field shielding
4 powerful DC sections specially designed for TC Electronic Nova or TC-Helicon VoiceTone pedals
short circuit protection of all outlets
advanced LED monitoring of each section
temperature monitoring
120 or 230V mains voltage operation
detachable mains power cord
a total of 16 Flex cables included
one Split Flex and two Stack Flex for both 18 and 24V pedals also included
mounting kit for pedal boards included
durable steel enclosure with 2mm thick top
Please have a look at the document CIOKS 10 - Professional range featuresfor more detailed explanation of some of the above features.
NEW!!!
Mounting of CIOKS TC10 power supply underneath Pedaltrain is a step-by-step do it yourself guide on how to attach the TC10 power supply underneath a Pedaltrain pedal board.
The older document CIOKS 10 - Pedal Train attachment shows how to mount the similar size DC10 power supply on top of a Pedaltrain pedal board.
Specifications:
Outlet 1-4: 9V DC / 100mA each
Outlet 5-6: 12V DC / 300mA each
Outlet 7-8: 9 and 12V DC / 300mA
Outlet 9-10: 9 and 12V DC / 400mA
Size: 158x98x35mm (excl. detachable rubber feet)
Weight: 1,1kg
Best price, RM 920.00
7) Cioks DC-10
DC10 is a member of CIOKS professional range of dedicated multi-output power supplies for effect pedals. It has 10 regulated and well filtered DC outlets configured in 8 isolated sections. With a total of 1.600mA it's a perfect solution for bigger rigs with pedals only using a DC power source. Its three powerful sections with 400mA each will power pedals with special requirements like those from TC Electronic Nova series, Eventide Factor series, MoogerFoogers, Radial Tonebone or others without the need of custom cables. Selectable with a switch DC10 offers voltages 9, 12 and 15V DC, and combined with one of the included Stack Flex also 18 and 24V DC. The first 4 isolated outlets offering 4x100mA are ideal for standard 9V battery operated pedals
Features:
10 outlets configured in 8 isolated sections
toroidal transformer with additional magnetic field shielding
3 powerful DC sections with 400mA each
15V option for Radial Tonebone pedals
short circuit protection of all outlets
advanced LED monitoring of each section
temperature monitoring
120 or 230V mains voltage operation
detachable mains power cord
a total of 16 Flex cables included
one Split Flex and two Stack Flex for both 18 and 24V pedals also included
mounting kit for pedal boards included
durable steel enclosure with 2mm thick top
Please have a look at the document CIOKS 10 - Professional range featuresfor more detailed explanation of some of the above features.
NEW!!!
Mounting of CIOKS DC10 power supply underneath Pedaltrain is a step-by-step do it yourself guide on how to attach the DC10 power supply underneath a Pedaltrain pedal board.
The older document CIOKS 10 - Pedal Train attachment shows how to mount the DC10 power supply on top of a Pedaltrain pedal board.
Specifications:
Outlet 1-4: 9V DC / 100mA each
Outlet 5-6: 9 or 12V DC / 200mA each*
Outlet 7-8: 9 and 12V DC / 400mA
Outlet 9-10: 9 and 12 or 15V DC / 400mA
* can be merged into a 400mA section
Size: 158x98x35mm (excl. detachable rubber feet)
Weight: 1,1kg
Best price, RM 920.00
Dear valued customers, at the moment, all CIOKS Power Supplies needs to be pre ordered ya. A small amount of deposit is require. Very sorry for the inconvenience ya. Thanks again for your time.
Want More.... Click HERE!!!
Thanks again for your time, and Rock On!!
God bless........
Dealing method:COD at our showroom or by post (Additional Charges)
Location of seller:Cheras Alam Damai, near Taman Connaught. For map please click Here
Contact method/details:PM, SMS or Call Brandon at 012-3183281 or June at 016-6200411. Or call our office at 03-89320171
Have a nice day.
SERVICE QUALITY, OUR TOP PRIORITY
Thanks and best regards,
Flame Sound Solutions
www.flamesoundsolutions.com
Don'f forget to join us on Facebook or visit our Website for more promotions and updates ya!
This post has been edited by flamestudio: Jun 12 2013, 10:45 PM
Quote
0.0281sec
0.25
5 queries
GZIP Disabled