Just got my 16gb via poslaju. Checking the unit (not even power on yet) I got screen lifting problem. I could feel it if I scroll my finger along the left bezel the screen bulge a bit in the middle. It's just a bit but going to be a problem with screen protector later. That part will likely where the screen protector peel off first. Will monitor if it got worst or not. Bad luck this time I guess.

So, what should I do for RMA? Which is better option? Asus malaysia or google?

I'm going to try the xda fix first. If it fail, I'll email you for further rma advice. BTW, everything else is perfect. I love this tablet. Thanks for the fast and excellent service.

Edit: I fixed it super glue style.
1. Pop open the back cover
2. Detach battery
3. Unscrew 4 small screws that hold the bezel on the left side
4. Pry open the frame so it create a gap between screen and the bezel
5. Stick readily cut plastic toothpick into he gap to hold the gap open
6. Put a small amount of super glue on the tip of small headed screwdriver
7. Very very carefully and with steady hand, put the glue along the gap (be careful not too much)
8. Put N7 between two big books so each book pressed on the bezel
9. Wipe access glue if any (quickly)
10. Left it for an hour and voila, it's perfect.

Take note that there's no need to press the screen during gluing bcoz once those 4 screws are out, the screen sit perfectly in the frame. Just press on the bezel. Also, I noticed that after the screen fixed, the overall color temperature not too warm anymore. White seem more natural than before which is a bit reddish. I think screen lifting had caused this color issue.

This post has been edited by adx: Aug 30 2012, 12:50 PM