Hi HappyGuy, my previously used for 1mbps streamyx linksys router is also the same UFO router, WRT54G2(mine is v1).

Could u teach me how to setup Access Point with WRT54G2?
Sorry please tell me the detailed settings for WRT54G2 and also for the Thomson?

======================================================

And......

Who could tell me how to check whether I'm on Public IP or Private IP?
I didn't ask for change of IP type since installation. So mine is in default (according to first post, should be Private IP in default).

But I checked via IP detector websites(eg. http://www.ip-adress.com/ , http://whatismyipaddress.com/, blabla..) and all show 14.192.x.x (IP format just same as those IP in picture posted by public IP member).
Summore everytime I reboot/reconnect router, the IP will change(like 14.192.x.1 becomes 14.192.x.25) everytime as usual.
So this means I'm Public IP? But...
when I check in Thomson router page(Home > Broadband Connection > Internet Services > eInternet), IP address stated in the page is 10.x.x.x(I know this is Private IP because it starts with 10 due to the reason of the IP range of 10.0.0.0 to 10.255.255.255 are Private IPs).

So conclusion is I'm actually on Public IP or Private IP???    

Once a while, I'm getting this speed over Wifi network (any MHF user here can better this ? ).
However. while DL speed test, the meter needle was only hovers around 2 to 3 Mbps range for the 1st half of DL test process and then a sudden burst/spike of speed at the end. (Observe the yellow circle)

10 out of 10 tests, the speed test demonstrated the above behavior, spike of speed towards the end. Anyone can explain this ? 

Once a while, I'm getting this speed over Wifi network (any MHF user here can better this ? ).
However. while DL speed test, the meter needle was only hovers around 2 to 3 Mbps range for the 1st half of DL test process and then a sudden burst/spike of speed at the end. (Observe the yellow circle)

10 out of 10 tests, the speed test demonstrated the above behavior, spike of speed towards the end. Anyone can explain this ? 

anyone can confirm how to save the Thompson config file?

even i login with admin previlege the option is not there (while the generic Thomson router should have the option)

I can't afford to configure my routing/port fwd configuration all over again in case the router down or something

The interface is damn too slow

To setup the linksys router as access point, just need a network cable, plug it to LAN port in Thomson router, and another end to WAN/Internet port of linksys router.

My router already flash to use dd-wrt firmware. so my steps may not apply to u.
you may check out this link to setup.
http://www6.nohold.net/Cisco2/ukp.aspx?pid...585db4_3687.xml

http://www6.nohold.net/Cisco2/ukp.aspx?pid...less_router.xml

Finally after 10 days of bashing maxis through twitter, email, call & maxis forum, I got a call today installation on 27 July.

I did warn them about making sure TM contractor show up on time as well.

I guess complaining to MCMC really work. Plus I get the promo price RM118 for 10MB.

I just got a 2nd call from maxis regarding my complaint to MCMC, dam nice fella apologizing this & that. Good that they finally follow up even after 10 days.

Guess MCMC really POWER !

TM guy will be late for sure because they are on commission basis, they more they do, the more they get... So they arrange more appointments than they can handle in a day... While the maxis guy is on fixed salary, only two installation per day, plus will be scolded by maxis if late

Whether maxis guy or tm guy, they are contractor actually, except that maxis try to maintain reputation and quality.

maxis don't send contractors, they're actual maxis staff.

the tm contractors that came to my house say that they'd only do two installations a day, because there really isn't enough time for them to squeeze in more, what more with problematic installations.

having said that, in no way am i condoning any no-shows or late-comers from either maxis or tm. at least they must have the courtesy to inform.

Damn, i thought maxis automatically alloted the free 150 minutes to my maxis mobile already.
As the matter of fact, no free minutes alloted to my maxis mobile account yet. I need to call them, ask them and the CS replied " i need to check with the Home department first".

the thomson router is pure rubbish. overheat more than 4 times in a month, still counting.

anyone facing problem that thomson auto rebooting? What 'Kernel warm restart'?

maxis don't send contractors, they're actual maxis staff.

the tm contractors that came to my house say that they'd only do two installations a day, because there really isn't enough time for them to squeeze in more, what more with problematic installations.

having said that, in no way am i condoning any no-shows or late-comers from either maxis or tm. at least they must have the courtesy to inform.

All about $.

If Maxis pay more to TM while TM hired & pay more to their contractor / staff, problem solve.

those who experienced the 'xDSL linestate down' issue, how did you guys actually solve it?

Can solve meh? Maxis guy coming tomorrow, but I don't think it can be solved... Will update u guys

By the way, r u landed or high rise?

no idea, i see people been talking about it but doesn't seems to be any solution out there 
mine is high rise.

Mine high rise too...  I suspect it could be telephone line!