Stock Cooler Overclocking (AMD & Intel)
|
|
 Jan 18 2006, 09:58 PM
Return to original view | Post
#1
|
 
Senior Member
1,426 posts Joined: Jan 2005 From: Jln Sg Besi, Taiping  
|
Here is mine.
|
Quote|
|
|
|
|
Jan 21 2006, 06:27 PM
Return to original view | Post
#2
|
|
Senior Member
1,426 posts Joined: Jan 2005 From: Jln Sg Besi, Taiping
|
QUOTE(soulfly @ Jan 20 2006, 07:27 PM) qualified entry will be selected to enter the new S-939 oc database awww, stepping a, is it the only way to see on top of the proc?requirements: - 8hrs prime stable + cpu-z - include cpu voltage, stepping & cooling method for the time being, i can only select x800's result because he had his stepping in his sig. still waiting for the stepping from the rest  This post has been edited by kanethesun: Jan 21 2006, 06:42 PM |
|
|
Jan 21 2006, 09:52 PM
Return to original view | Post
#3
|
|
Senior Member
1,426 posts Joined: Jan 2005 From: Jln Sg Besi, Taiping
|
ahh, I'm newbie.
hehe, just got it straight from PCZONE a, that time just worried will get Venice or Winchester only. erm, dont have any thermal paste now, so cant open the HSF and see. Is it a must to apply back thermal paste after pull out the HSF? hehe, my AXP I did last time didnt apply any on it  |
|
|
Jan 25 2006, 06:32 PM
Return to original view | Post
#4
|
|
Senior Member
1,426 posts Joined: Jan 2005 From: Jln Sg Besi, Taiping
|
did you guys enable CnQ in bios?
just read one post from xtremesystem, some forummer said that its not recommend to enable CnQ if overclocking. below is the link, post #29 http://www.xtremesystems.org/forums/showth...?t=79509&page=2 |
|
|
Jan 25 2006, 06:47 PM
Return to original view | Post
#5
|
|
Senior Member
1,426 posts Joined: Jan 2005 From: Jln Sg Besi, Taiping
|
ohh, will disable later.
newbieockids do you know what is the negative effetcs if enable CnQ and OC? |
|
|
Jan 25 2006, 06:59 PM
Return to original view | Post
#6
|
|
Senior Member
1,426 posts Joined: Jan 2005 From: Jln Sg Besi, Taiping
|
ohh, thanks for PCcrazy and newbieockids for the explanation
|
|
|
|
|
|
Feb 7 2006, 01:11 AM
Return to original view | Post
#7
|
|
Senior Member
1,426 posts Joined: Jan 2005 From: Jln Sg Besi, Taiping
|
should lower your HTT multiplier to 3x.
and if you're not using any high performance ram, you shall try to use divider as well. This post has been edited by kanethesun: Feb 7 2006, 01:14 AM |
|
|
Feb 8 2006, 11:26 PM
Return to original view | Post
#8
|
|
Senior Member
1,426 posts Joined: Jan 2005 From: Jln Sg Besi, Taiping
|
it should be ok if you use divider, think so.
topic starter correct me if I'm wrong. |
|
|
Feb 11 2006, 01:30 AM
Return to original view | Post
#9
|
|
Senior Member
1,426 posts Joined: Jan 2005 From: Jln Sg Besi, Taiping
|
QUOTE(kurikuraX @ Feb 10 2006, 12:44 PM) My multiplier only can be set at 4X..cant set at 3X...ans..what is RAM divider actually? i cant find its function in BIOS...im using 2*512mb Corsair VS...single channel..cant set to dual..unstable..hahhaaa..unidentified! perhaps you got confuse of the 2 multiplier setting? there are 2, 1 is for CPU Multiplier and another 1 is for HTT Multiplier. try to check again to confirm and for RAM divider, I think its for the ram to run lower than its own Frequency. correct me if I'm wrong pross  |
| Change to: |  0.0217sec
 0.56
 7 queries
 GZIP Disabled
Time is now: 1st December 2025 - 04:07 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.