My Opty 144 running 2.7GHz @ 1.40V (BIOS Set). Temperature is as below:

Hot afternoon:
CPU - 44C (4000rpm)
PWM - 44C (3000rpm 80mm case fan)
Chipset - 48C (5000rpm Evercool VF)

Cold night (after rain):
CPU - 40C (2800rpm)
PWM - 41C (2200rpm case fan)
Chipset - 44C (3000rpm Evercool VF)

Temperature is taken when dual prime95 is running. Primarily tested with 6 hrs 6 mins, now wanna change RAM timing bcoz my RAM isnt stable in prime.

Btw,

This post has been edited by charge-n-go: Apr 22 2006, 06:13 PM

now i prime with stock 2-2-2-5 @ ddr400, fail pulak at 12K FFT. Must use more than 650MB to test baru stable... nothing to say
I ady report in DFI street.
Well, maybe i'll RMA my board la, sure got problem ady. Last time my nF2 can run 2-2-2-5 DDR400 flawlessly for 48 hours !


u r right

js flashed to the latest 04/06 (BigToe), thx winc87 for tat
Haiya.... so paiseh. actualy i use the older Prime95 version, caused problem. Wat a joke esp i m a com engineering final year student, simple thing like tat oso nv think of it LOL.

currently running at 207MHz only. Testing 1 by 1 from 200MHz onwards .


Vdimm = 2.5V + 0.03, detected as 2.67V in ITE.

DRAM Drive strength : 5 (weak 3)
Data Drive strength : 1
Tref = 4706 cycles

The others are in the screenie below:



Attached thumbnail(s)