Stock Cooler Overclocking Results



Format:
Core speed * Mem frequency * Name * Revision * Mobo * RAM * CPU Voltage * CPU Temp at load

AMD

A64 Venice 3000+

1. 2754.4MHz * 229.5MHz - kingmaker_20 * E3 LBBLE 0522 FPBW * DFI LP UT NF4 SLI-D * Twinmos SP PC3500 1x512 * 1.456V * 52C
2. 2700MHz * 245MHz * ahpaul82 * E3 LBBLE 0516 CPBW * DFI LP UT NF4 SLI-D * Corsair XMS3200PRO 512MBx2 * 1.616V * 53C
3. 2662.6MHz * 242.1MHz - newbieockids * E6 * DFI NF4 Infinity * Gskill TCCD * 1.568V
4. 2601.3MHz * 289.0MHZ - Penjejak awan * E3 LBBLE 0522 cphw * DFI nf4 ultra-d * 2x512MB OCZ tccd elite edition * 1.632V * 51C
5. 2600.3MHz * 185.7MHz - kanethesun * E6 * DFI NF4 Infinity * KVR DDR400 512x2 * 1.568V
6. 2526.4Mhz * 229.7Mhz - zogenk * E3 LBBLE 0519 BPHW * DFI Infinity NF4 Ultra * KVR DDR400 512x2 * 1.488V * 33C
7. 2520Mhz * 229.1Mhz - snif * E6 LBBWE 0542 GPFW * MSI K8N Neo2 * Mushkin 256x2 * 1.420V * 42C
8. 2501.8MHz * 250.2MHz - x800 * E3 * MSI Neo4 Platinum * KVR DDR400 256x4 * 1.5V
9. 2443.2MHz * 222.1MHz - CoffeeDude * E6 LBBWE 0542 EPHW* DFI NF4 Infinity * KVR DDR400 1GBx2 * 1.472V * 47C
10. 2443.2Mhz * 135.7Mhz - lonewolf * E6 * DFI NF4 Ultra Infinity * Team Xtreem DT-D43 512x2 * 1.504V * 45C
11. 2120 MHz * 235.6MHz - Garfie * E6 * DFI LP UT NF3 ULTRA-D * K. Hyper-X DDR400 256x2 * 1.408V * 49C
12.



A64 Venice 3200+

1. 2800.7MHz * 233.4MHz - tAmp0i * E3 * DFI LP UT NF4 SLI-D * 2x 256MB KVR PC2700 * 1.48V * 44C
2.
3.

A64 X2 3800+
1. 2557.6MHz * 232.5MHZ * sina8687 * E6 CCBWE 0543 TPMW * ASUS A8NE * 2x512MB Corsair VS * 1.408V * 54C
2.
3.

INTEL

Prescott 2.40Ghz
1. 3808.6Ghz * 211.6Mhz * nelza_ax * rev E0 * Abit IS7-E2G * KVR 512 DT-d43 x1 * 1.344V * 66.5C
2.
3.

This post has been edited by CoffeeDude: Mar 29 2006, 08:19 AM

Which A64??isit 3000+?3200+??
And all depends on week/good clocking chip.

In my case 3200+ on stock cooling will do 2.55 GHz 1.55v prime stable. But whenever I increase the vcore, let's say 1.65v, my proc will only do 2.5GHz. Strange? Not really. Whenever you increase vcore, heat goes up. Because of that overclocking capability is seriously degraded. So I have to find a sweet spot between maximising clock speed and vcore. As you see, there is no way to get a maximum potential on stock cooling. Therefore it's advisable that you consider something better.

ermm... mayb around 30% extra wif stock?

add a ninja n u can do 50<

Let's consider A64venice. As we know it is based on the same core whatever the rating given, 3200+ or 3500+. So basically what happen is, when you overclock most of the time both will reach a typical peak value. So you can't say for 3200+ overclocks less than 3500+. If both are good batch procs they will hit exactly the same peak limit let's say 2.9 GHz. So in terms of percentage 3200+ is better than 3500+. To me, percentage is not a good way of making a distinction between both procs.

Hio, How to know which proc having good week. Now new AMD proc will be E4.

If no good week can oc how high?

From wat i have read, 40%++ is possible because it depends alot on ur luck too. a very decent overclock indeed for a free cooler.

Does anybody have some actual results with screenshots?

redken,
40% on stock cooler??? Are you sure?
Thats extra 720Mhz on my 1800Mhz proc.

I have added something on the first post. Check it out.

that's 2.52ghz on stock cooler, dont think that'll be a problem even for mine
especially for those nice steppings that do 3ghz on air (not stock of course)

soulfly, good idea.
But as I'm a noob in this area, can someone help to maintain the statistics?

We will assist you in maintaining the stats by giving opinions and suggestions. Well, you can always refer to AMD64 OC database for statistics format.

is it true ?what the stepping BN or..?got 3000+?which shop can get 1?

This post has been edited by jiant: Jan 15 2006, 09:22 PM

most problem od a64 occuring when oc is the proc too hot.
when using stock the most i can do is 250.
using 3rd party cooler i found out tat it need only stock vcore to do 250...

Please update the first post if you have done overclocking on stock cooling

wah...need 8 hour for post result only.if using stock cooler only,i think we ca see result only 1-2 hour for know that proc stable or not.

i folding with 2.43ghz
never crash b4
when go to 2.5ghz, sometimes will crash
if going for 2.6 and above, confirm crash after afew minutes of fullload
stock cooling tho

Hi, my AMD 939 3200 proc => CDBHE 0540. How to know this is under good week or poor week?

burn it 1st, and u'll know either it is good week or not..

Athlon64 3000+ (Venice) * MSI K8N Neo4 Platinum * 1GB KVR BT-D43 * 1.5V * 2.5Ghz

Screenie Link

This post has been edited by x800: Jan 18 2006, 03:48 PM