most probably yes.

Just dont buy any corsair xms2 ram.

hi, i have a noob question to ask. i've just bought an asus F9Sg with Mobile Intel® PM965 Express Chipset +ICH8M motherboard and an Intel® Core 2 Duo Processor T7500 (2.2 GHz, 800MHz, 4MB L2 Cache). it also comes with Geforce 9300 MG. i have only 2 Gb ram and i am planning to upgrade it to 4Gb, but I am wondering can i use DDR2 800 instead of DDR2 667 that is in the laptop now?is there any difference in performance?
here's the info on CPU Z.

Yes u can.
However, the ram will be forced to run at DDR2 PC2-5300 667MHz.

And No, you won't feel any differences.

hmmm

the spd timings works the rams are throughly tested by random batches

the problem with compatibility is the motherboard bios and voltages

thats ure issue...

and i suggest using windows mem diagnostic test...
much better than memtest86

out of 11 times i ran in the last one month

WMDT picked up errors that memtest86 didnt 4 out of 11 times..
a few ppl already noticed this and WMDT is about 95 percent chance u will get OCCT stable on ure NB and MEM with the assumption ure vcore settings were also correct.

just curious name the exact ram with link if possible
with the mobo system in question.

personally i always go kingston for any non-oc setup..
laptops, my dell office rig, my htpc..
they always work and rma time is less than 2 weeks and they have a fully support office in lowyat plaza..
which is y i recommend to a lot of ppl who are buying quaddies Q6600 and want to OC them to 400bus.. get the kingston hyperx PC2-6400 CL4 LL..
they work very well at rated specs. and arent hot, and i have been running them for nearly 2 years at almost 24/7 on my htpc / torrent rig without any issue.


This post has been edited by cstkl1: Apr 29 2008, 06:31 PM

I need to upgrade my computer to Intel E4600, any suggestion on which brand of memory and motherboard works well?

Vista SP1 32bit can detect 4gb but Vista 32bit can't detect 4gb, that's true. But i'm not sure the 32bit OS got maximize the 4gb RAM usage and performance i'm not hardware guru.

boleh sesapa bg tau ram chip apakah yg paling ok utk KVR DDR2 800mhz??
segala kesulitan amat dikesali..

Very nice information.good work sir

I'm new to computers/laptop...

I'm using a Acer TravelMate 2410, just wondering anyone knows it use what type of RAM?

Thanks in advance..

hi, all
do correct me if i'm posting at the wrong section
i'm currently using a Intel Desktop Board D845GBV with x2 256MB RAM
would like to upgrade it to 1GB or 2GB if possible
what type of RAM should i buy?
thanks

This post has been edited by domo_kun: May 27 2008, 09:39 PM

helo need some sifu help here

i just bought a Kingstons HyperX PC2-6400 1gb x2

but when in cpu-z onli detect pc2-5300
using abit p35-e mobo
i'm sure in the bios setting i set to FSB/DRAM == >1333/800
and also change the dram timing setting to 5-5-5-15 others timing i onli left auto

did i miss anything?

thanks in advance

This post has been edited by lthock: May 27 2008, 11:18 PM


Attached thumbnail(s)

u've been cheated by the seller... lol

i hav a question here..

my system is using 1gb and 512mb ddr667 corsair value select ram.. i am planning to get 1 team elite 1gb ddr800 ram..
so my question is i should put the 2 1gb memories in dual channel or put in the 512mb aso??
which 1 will giv the best performance?? i will oc the rams a little.. but still consider oc rite..
btw i am using windows vista 32-bit.. will 2gb be sufficient for normal use and gaming at mid resolutions??

This post has been edited by weikeat90: May 30 2008, 09:22 PM

hmm, i have a question too.

im using Abit NF-M2S with latest bios .

will Crucial Balistix Tracer 800mhz 2x2GB DDR2 be sufficient to run Vista 64bit?.

I would suggest you to go and change the RAM the PC-6400 because you have the right to do so in the first place.

Maybe you could call and ask the seller because sometime they also not realize goods they sold.


Based on my experience, 2 X 2GB capacity is more than enough for PC normal usage. E.g gaming, surfing, picture edition, simple programming, etc.

i'm planing to upgrade my ram to 2gb/4gb, but still confusing either go for DDR2 800MHz or DDR2 667MHz.

here's my pc spec:
Gigabyte GA-P31-S3L, FSB 1333MHz (4 x 333MHz)
Intel Core 2 Duo E6550, 2333 MHz (7 x 333MHz)
RAM - 2 x 512MB DDR2 667MHz (333MHz x 2) dual channel

since my bus clock is running at 333MHz, if i swicth to DDR2 800MHz, then my clock speed will be 400MHz izit?

should i go for 800MHz or 667MHz?

i'm currently using KVR400X64C3A/1G
will it be okay if i'm to use another piece of RAM that is of a different type?
KVR333X64C25/1G maybe?
thanks

Wondering why my OCZ Reaper 4-4-4-15 PC2-6400 only runs at PC2-5700 on my MSI MS7369 motherboard...

i want to ask if a laptop with following memmory:
Installed Size: 512 MB / 2 GB (max)
Technology: DDR SDRAM - 333 MHz
Memory Specification Compliance: PC2700
Can i put in a Kingston DDR2 667mHz 2gd DDR2?
Thanks in advance

DDR tech cannot mix with DDR2 tech. different tech n system.