I'm thinking about adding heatsink to my ram. Which one should I get: ramsink or heatspreader?

I need some help here. I having a notebook as my Sign. and i wish to add another 1GB ram into it. i wonder is that possible ? coz i dunno how many ram slot in there and i not sure is that any brand of ram fix into it or not ?
is there any one can tell me ?

ramsink is better, but costs more

it is possible provided there's available slot..anybrand should work fine

usually 2 ram slots la, so d max u can upgrade is 4gb ba

post deleted.. wrong thread

This post has been edited by jinaun: Mar 14 2008, 10:44 PM

err.. noob question, if a mobo which has a 800FSB it should able 2 support 800mhz DDR2 ram? how abt a 800FSB proc fit in a 1066FSB mobo with 1066FSB ram? dun really understand these FSB thngy..

Hi guys, i need some help from u professional. i'm currently using TWIN2X1024-5400C4 on my Intel(R) G965 Express Chipset motherboard. but i just bought a 2 x 2Gb (4GB) OCZ SLI-Ready ram 800Mhz 5-4-4-15. so if i combine both on my machine will it be faster? or it will slow it down? hmm pls advice.. thankss

and at the same time can i know how to overclock my ram? any easiest wat for noobs?.. pls advice again.. thanks to all u pro!

go for ramsink

bro, you can check any models ram support/slot available at www.kingston.com just search by selecting your model then everything will shown:)

but since i so free i did that for you also haha

Search Results for: Acer Aspire 5590 Series 5593, 5594

Standard Memory: 512 MB (Removable) or
1 GB (Removable) or
2 GB (Removable)

Maximum Memory: 4 GB
Expansion: 2 Sockets
CPU & ChipSet: Intel Core 2 Duo Intel 945PM
Bus Architecture: PC Card
Mfgr's System P/N's: N/A
Comments MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode.

If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation).



bro, if you put both together you still running on 675Mhz, your corsair will be the one pulling down the speed, i would recommend you to use only the 800mhz, but if you dont care about the transfer rate, can have a try

Sorry, I have a noob question to ask. someone told me that a pair of ram juz run at 320MHz, may i know why? is it due to the difference in chipset? it is apacer pc3200 512 ram. and he told me that the kingston ram he bought run at 400MHz. can run until tat high? if not mistaken, he is using dual channel. 4 slot for 4 pieces of ram ? then is the principal of the slot state by the author apply? for the 64-bit one.

hey one ram question.

Asus Mobo. been using 2x512mb at 533mhz, now i bought 2x1gb 800mhz. if i put in the 1gb ram with 800mhz, can still put in 512mb ram with 533mhz? different speed boleh kah?

both ram is kingston.

Can , but the speed will still remain at 533

but my pc is wif motherboard P4SE/U2 (SiS 645) Series wif DDR 333MHz memory support for Pentium 4, 533MHz FSB......

is it can support the DDR400 RAM ?? pls help... wat maximum ram i can install....thank a lot

---

Added on March 29, 2008, 12:19 pmmy motherboard got 3 slot . can i mix wif SD ram 128 and one 256 SDram... wif DDR 400 ram....will it crash..then burn?? thank for attention and reply

This post has been edited by kit840407: Mar 29 2008, 12:19 PM

guys, i'm usin the crucial ballistix 2x1gb ddr2-6400 which supposed to run at 4-4-4-12, but when i used cpu-z to detect.. it shows at 5-5-5-18.. er.. can i know what is happening? arent it suppose to run at 4-4-4-12?

btw, i'm running on abit ip35-e with e6750..

thanks

This post has been edited by capiche: Mar 29 2008, 06:53 PM

You have to adjust the timing in the bios by yourself.
Your motherboard doesn't support EPP, if it supports EPP, then it'll adjust by itself.

halo. i got a noob question

i juz bought a pair of 2gb kvr. after i replace my existing 512x2, my mobo only detects 3.4gb of ram. wat does it mean?isit my mobo tat is bottleneck o wat? owh btw, only using cpuz, i can detect 4gb.

You're using Windows XP 32Bit / Windows Vista 32Bit right?
If that's true, then it's normal for your system to only detect 3.5GB out of 4GB.

yup im running on xp 32bit. but isit normal tat at bios mode, my mobo only detects 3,5gb? btw, thx bro

Mind posting CPUz screenie?

hi boss.. haha.. thanks for the info.. but i cant seem to find the info abt epp on my mobo.. ecc got la.. hehe.. then how about the voltage? i shud stick with the reference value? 2.2V?

good luck on ur shop opening!! btw, some of the pic in ur silverstone sales thread is wrong.. casing in fans section.. hehe

This post has been edited by capiche: Mar 29 2008, 11:36 PM

If you're on 800Hz @ 4-4-4-12, you don't need 2.2Volts.
1.85 ~ 1.9Volts is enough.

About the wrong pictures, yes i know, it's because i'm still in the midst of updating.