Maxis Connect to Maxis using Custom Router!, Guidelines
|
|
 Dec 13 2013, 09:57 PM
Return to original view | Post
#1
|
 
Junior Member
4 posts Joined: Aug 2008  
|
Hi guys, can you help me with a problem? I have a Tp link wr1043ND and I want to use it as an AP but not replace the Thomson router. Disabled dhcp and set ip address to be in the same network as the Thomson one. I am able to get internet but my TV doesn't work anymore.
I noticed that under iptv the multicast is shown as cross:  if I disconnect the tp link router from the LAN port it turns back to a check and my tv is working fine. How do I fix this issue?  your help would be gladly appreciated! thanks! |
|
|
Dec 14 2013, 03:57 PM
Return to original view | Post
#2
|
|
Junior Member
4 posts Joined: Aug 2008
|
QUOTE(gogetter83 @ Dec 13 2013, 10:48 PM) Be careful to use routers as APs unless they have a configuration mode specifically to set it as bridge/AP. Doesn't matter if you disable DHCP server, routers have other features that can conflict with another router. thanks! worked like a charm My suggestion, connect the WAN port of your TP-Link to the Maxis router. Then run the quick setup on TP-Link and select "Dynamic IP". Connect to the Wi-Fi of your TP-Link for use.   |
| Change to: |  0.0388sec
 0.27
 7 queries
 GZIP Disabled
Time is now: 8th December 2025 - 01:40 AM |
Quote