All these are accessible via telnet.

http://npr.me.uk/telnet.html

once you are in the telnet session, just type menu, you will see all the possibilities. The Web UI is stripped/locked down.

Hmm, can do some experiment now

DNS Server Entries:
DNS Server Source Label Metric Intf St

ate Domain
D 58.71.252.3 rt_local_mgnt 10 eMGMT U

P acs069.maxis.com.my
D 58.71.248.3 rt_local_mgnt 10 eMGMT U

P acs069.maxis.com.my
D 58.71.252.3 rt_local_voip 20 eVoIP U

P homesip.maxis.com.my
D 58.71.252.3 rt_local_voip 20 eVoIP U

P bvgw01.maxis.com.my
D 58.71.248.3 rt_local_voip 20 eVoIP U

P homesip.maxis.com.my
D 58.71.248.3 rt_local_voip 20 eVoIP U

P bvgw01.maxis.com.my
D 58.71.252.3 0 eInternet U

P *
D 58.71.248.3 0 eInternet U



:voice qos list
Traffic Type QOS field Value
----------------------------------------------
Signaling DSCP af42
Realtime DSCP ef


:voice list
autofxo : Enabled
digitrelay : auto
click2dial_port : all
rtp_portrange : 40000-60000
sign_internal : external
static_interface : Enabled
interface : eVoIP
sec interface : eVoIP
endofnumber : #
country code : 60
delayed disc : Disabled
delayed disc ovr : none
delayed disc tmr : 60
ringmuteduration : 0
feature-mngt : internal
nocallsetupmsg : never
syslog-scope : none
PSTN soft switch over : Disabled
no answer timer : 120
call-setup-failure-timeout : 0
CCBS-invoked-timeout : 0
GoingOnHookEffect : endactivecall

:voice state
:voice state
VOIP_SIP-admin. state : Enabled
VOIP_SIP-oper. state : Enabled
VOIP_SIP-IP address : 10.32.91.204

Tried again yesterday to enable VoIP with custom router using the RB250GS switch. I managed to get the Thomson to connect to Maxis' VoIP server but it seems the real traffic is carried across the PPPoE interface so I can't actually call or receive...

Looks like it's either fall back to the Thomson or buy a VoIP capable router now...

Did you managed to get a SIP IP from the VOIP server ? Did you configure a DHCP client to get the IP from the VOIP DHCP svr ? From my ethergateway port I can't seem to ping the VOIP DHCP but could do so via Thomson.

You said that it seems real traffic is carried across PPPoE but if that is true, the VOIP phone would not be working until PPPoE connection is established. However, I noticed typically the phone line is working even before internet is on the Thomson. Do you observe the same ? Try rebooting your thomson, you will see the phone line LED light up before the Internet one does.

keep on see ppl say Thomson router is lousy... what is the problem btw?

I set the switch to tag packets coming out of the Thomson to 821 and finally can connect the SIP IP 10.34.xx when the Thomson turns on. So the phone 1&2 lights up. but then i plug my phone into the jack, both also not working. No dial tone, can't call out or call in...

Any ideas what I might be doing wrong?

Im not a computer or tech guy but does a bad router mean bad wi-fi signal?
Is router a different word for a modem?
Or is it something different?

used it for a day, then u realize it's ultra fark'ed dap...

the router gets congested when:-

me torrent (capped at 300kb/s)
my bro (watching pp stream)
my sis (youtubing via ipod touch)
my dad (surfing)

when it's congested, the maxis thomson router gila gila and no internet connection out of a sudden

wifi signal is weak compared to my previous belkin N150 router

from my observation. the router will only gila when i torrent.
my house have more than 5 user. and when i run torrent, the router will get really hot. and it will start gila.
after i put a cooler pad to cool down the router, this problem never happen.

but the wifi signal still sucks. tried to change channel also not improve the signal.
My house is double storey.
even the AP signal (upstairs) which i bridge the thomson router(downstairs) is better when im at ground floor.

cooler pad? omfg... will gif it a try then...

any idea what does the 2 usb ports by the side work as?

RTFM and you shall find out the use of the USB port on the side of the Thomson Gateway

wow shit!

this thing can do so many things and it works like shit...

sigh...

After RTFM, I concluded that the most useful feature of this USB port is to hook up a good USB Fan and start spinning lol ...

may i know what is better public ip or private ip in maxis ftth

Guys,

Can someone help to provide guide step by step on how to configure Alcatel Lucent BTU to output VLAN 621 to port 2 and other VLAN (i.e VOIP) to other port

I have my own router with DD-WRT; however it doesnt really support VLAN tagging

Note Alcatel Lucent only works using command prompt; hence the guide in this page is not gonna work

Im having the same dilemma as U

Why not buy a smart switch like the Mikrotik RB250GS?

All ONT's are proprietary ( for now) regardless Huawei or ALU. If you read up on how last mile fiber to the home works, you'll know that provisioning is done by the OLT remotely...so even if you can manually set it temporarily, most probably when you reboot, the setting will be overwritten.

Any router recommendation for huawei HG850a modem user??

tried this using ddwrt wr941nd..

but have some issue with upload speed...only manage abt 1.2mbps only...download is good..abt 9.7mbps ave...

anyone have this issue too?