Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 [WTS] Vinyl Tiles Flooring (wholesale), Vinyl click available !!!!

views
     
bcwee01
post Oct 21 2013, 01:30 PM

New Member
*
Junior Member
26 posts

Joined: Dec 2008
QUOTE(tpleong @ Oct 17 2013, 08:39 AM)
The price is RM4.80 psf including installation. Aluminium edging (if required) is RM5.00 per feet .
Also have a few questions

- Can the Vinyl tiles be installed on bare cement floor ?

YES, provided it is level.

- Noticed that some companies charge for self-levelling? What is it and is it compulsory?

If your floor is not level , then self leveling is recommended . Self levelling is very expensive .

We normally do skimming instead if it is not too bad as it is much cheaper. If it is just a little, we will do it FOC.-

Besides the vinyl price installation, is there any other charges i.e. transportation (place in Kote Kemuning) etc?

NO

Thanks

Philip
0198802697
*
Hi Phillip,

Do you have the 5 mm glueless interlocking system ? Considering changing it....

I have installed a 3 mm vinyl tiles on top of my existing 18 x 18 inch tiles. However due to my house was built on a ex mining land (YTL Lakefields) the moisture coming from the ground is quite high.

the vinyl tiles are coming off at area where there is high moisture. (not all are affected, only a few tiles, 5-6 tiles are affected) Are there any glue that can withstand moisture?, currently i am using those super strong epoxy that
seems to be holding the tiles in place...

Thanks,

Vincent Wee
bcwee01
post Oct 22 2013, 03:43 PM

New Member
*
Junior Member
26 posts

Joined: Dec 2008
QUOTE(tpleong @ Oct 22 2013, 08:54 AM)
Yes, I have . However, I have 2 color/design only.

Like others, we uses water based glue for easy mantainance and easy removing it in future. Hence, it could not withstand high moisture. However, we use other type of glue for wet area.

Since epoxy can do the job, just continue with it .

Cheers
*
Thanks for the reply, what other type of glue for wet area would you recommend?

The epoxy (labelled as super strong or steel ) only come is a small tube, it is going to be very expensive to use epoxy to replace the affected area about 5-6 tiles.

Regards,

Vincent Wee
bcwee01
post Dec 20 2013, 02:36 PM

New Member
*
Junior Member
26 posts

Joined: Dec 2008
QUOTE(tpleong @ Oct 22 2013, 08:54 AM)
Yes, I have . However, I have 2 color/design only.

Like others, we uses water based glue for easy mantainance and easy removing it in future. Hence, it could not withstand high moisture. However, we use other type of glue for wet area.

Since epoxy can do the job, just continue with it .

Cheers
*
What are the colours and design for the 5 mm glue less inter locking tiles? Since it is glue less. It would not have any problem on high moisture right ?

please quote price per sq ft. Estimated to be more 1400 sq ft , build up 20 x75.
« Next Oldest · Home Electronics & Wares Garage Sales · Next Newest »
 

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0126sec    0.54    7 queries    GZIP Disabled
Time is now: 26th November 2025 - 04:24 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.