Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 >>**LYN Perodua MYVI Owners Club v23°°<<,, Join the discussions and Club Gatherings

views
     
dares
post Jun 22 2012, 12:48 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(mysticalass @ Jun 22 2012, 12:42 PM)
Good spirit!! We shall all embrace such optimistic attitude! hahahahha

Anyways, i found another sound... biggrin.gif

At "P" gear, try stepping the brake on and off. Do you hear a very obvious sound from the dashboard area? A klik-klik-klik sound. What sound is that? That sound is too obvious to ignore..lol
*
That's the sound of the gear lock engaging/disengaging when you press/release the brake. That mechanism prevents you from shifting out of P unless you press on your brakes.

It is normal, many AT cars have that sound.

This post has been edited by dares: Jun 22 2012, 12:48 PM
dares
post Jul 7 2012, 10:03 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(mizeily @ Jul 7 2012, 09:59 PM)
Hi all..need opinions on my myvi prob..after i changed to reverse gear,the engine shakes like its going to die..but did not die lah..and also shakes sumtimes when stopping at traffic light when the rpm goes below 800..the SC already serviced the throttle body,grease the exhaust and confirms it is not the mounting..
Any idea wats wromg with it?

Tx
*
Spark plugs or ignition coil? hmm.gif
dares
post Jul 12 2012, 06:58 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(Area51SE @ Jul 12 2012, 11:19 AM)
That's quite impossible to get without the MUltimedia Set for Auto lol. Because it wasn't available all these while. Oh well, Maybe you could confirm with us again once your colleague gets his/her SE Auto without the Multimedia set smile.gif

*
At the P2 branch near jalan pudu, the SA told me that variant is finally available, their branch jus delivered their first unit last month. It is 2k cheaper, but the loan is processed as a purchase for the SE with multimedia, and the difference is discounted in the d/p.

Pls enquire at your nearest showroom smile.gif
dares
post Jul 23 2012, 12:52 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(noien @ Jul 23 2012, 08:38 AM)
think so too.
but i need the fuel consumption for city drive.
*
Like Kancil and Kelisa, Viva engine has 3 pistons, car vibrates when idling, engine mounting will kong sooner.

It is however a zippier car to drive in the city, can zigzag in traffic like a boss. But lacks stability and safety.

What is more expensive? fuel or safety?
dares
post Aug 12 2012, 06:33 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(sang_karim @ Aug 11 2012, 11:04 PM)
hi guys .. want to ask a question ... anybody here use iridium spark plug for their myvi? i've heard some people said better not to go for high performances spark plug coz afraid the normal engine cannot cope with the plug performance? is it true?  unsure.gif
*
Iridiums are not performance spark plugs, they merely last longer than the normal copper ones. Performance improvements are negligible to none smile.gif
dares
post Aug 13 2012, 12:39 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(felixyukito @ Aug 13 2012, 11:23 AM)
not sure whether mine is the normal copper one or the irridium one..  biggrin.gif  was thinking to buy that firestorm for my next list  tongue.gif
*
Join bulk at Saga thread now brows.gif
dares
post Aug 13 2012, 02:37 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(felixyukito @ Aug 13 2012, 02:27 PM)
haha bulk for the firestorm or the iradium?  tongue.gif  berapa bulk price?
*
Firestorm, RM220. contact V12kompressor to join smile.gif
dares
post Aug 23 2012, 10:04 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(dannythelazyboy @ Aug 23 2012, 09:06 PM)
I plan paying 5k for deposit and my budget is 500-600 per month. So could i still own a myvi 1.5L?
*
How much is your nett pay? that means after deducting EPF, SOCSO, other loans / credit card.
dares
post Sep 17 2012, 10:05 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(F R E E D O M @ Sep 17 2012, 09:47 PM)
Need help myvi kaki sad.gif

Myvi 1.5 auto , Just get this new car last month and currently just over 700KM

1. When the car speed above 100 or 120 , my car will have something like "terbakar" smell via aircond place , when slow down back , everything it will become to normal.

2. Today im going to port dickson , my car suddenly "DOWN" 4 time. Its like no battery power suddenly. When restart again , it will become normal again. or sometime it will down for a second then still can move.

i really need help , feel so frustration cause is my 1st car
*
1. Could be one of two things - unburnt fuel smell, which happens to some cars when revving high; or adhesive chemicals at your exhaust manifold generating the odour when heated, which happen to new cars. Try driving for a bit more time and see if the smell goes away.

2. Check if the battery terminals are loose. Some dealers loosen the battery terminals when the car is in storage to avoid drainage, but forgot to tighten it when delivering to customer.

This post has been edited by dares: Sep 17 2012, 10:07 PM
dares
post Sep 22 2012, 08:00 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(amaja14 @ Sep 22 2012, 02:10 PM)
i already have the p plate, but how can i put on the window is it sticker or what? i don't want to spoil it
*
» Click to show Spoiler - click again to hide... «

dares
post Sep 30 2012, 10:34 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(Assclown @ Sep 30 2012, 09:59 PM)
i just fixed Ultra Racing's rear anti roll bar. Can't feel any difference at all. Using 1.5 SE btw.
*
How thick? Do you corner hard?
dares
post Oct 1 2012, 01:30 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(Assclown @ Sep 30 2012, 11:00 PM)
I think it should be 16mm (not entirely sure). Costs rm280. I dont corner hard, slightly above medium
*
If you don't corner hard enough it won't make any difference. But if you don't corner that hard there was no need for the ARB in the first place. It will not have any effect when going straight.
dares
post Oct 10 2012, 12:03 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(mo66 @ Oct 10 2012, 11:57 AM)
Hi everyone, did anyone know if myvi 1.5 engine same as Nautika or Rush engine? Tq
*
Yep. But tuned differently, IINM.
dares
post Oct 12 2012, 07:33 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(VoxPopuli @ Oct 12 2012, 07:31 PM)
Guys, just now my myvi almost cost me my life!!!

Was heading towards a traffic junction with no car going at 60km/h, then i notice the green light blinking then i hit slowly on the brake pad , but the brake didnt work! only got TAGTAGTAKTAK sound , i was scared shitless, so i just hit the gas in hope i can make it through the red light luckily i did, i tested the brakes few times moments later but it worked .

When i reached home and tried to turn and parked, there is this bump that i had to go through, the car made a loud taktaktak sound yet again.

Anyone encounter this kind of problem?

Driving auto 1.3 ezi standard edition, 2012.
*
ABS?
dares
post Oct 12 2012, 08:16 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(VoxPopuli @ Oct 12 2012, 08:00 PM)
Didnt realize the abs lights  because my focus was all at the lights. Ive had an accident at the same spot in 2011 by a different car as it was a very prone accident area, what got through my mind was im not going to repeat the same mistake. So i just hit the gas.

Googled through  and everyone saying its the caliper problem.
*
Regardless, get it checked ASAP. brake problems are not to be taken lightly, especially now is rainy season.
dares
post Oct 19 2012, 02:39 AM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(peejayboy @ Oct 18 2012, 07:24 PM)
Thanks for the advice earlier on the setups. Btw, has anyone experience " burned rubber smell " after acceleration for myvi 1.5 auto? I've pop up the hood and the smell is coming from the engine bay but I can't seem to see anything wrong with it. Hmm
*
Check if its coming from the exhaust manifold / extractor.

This post has been edited by dares: Oct 19 2012, 02:39 AM
dares
post Oct 26 2012, 10:21 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(Area51SE @ Oct 26 2012, 03:53 PM)
Same QUestion here....
*
He wants to flip the P2 logo left to right laugh.gif
dares
post Oct 28 2012, 08:13 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(megat89 @ Oct 28 2012, 05:12 PM)
i think as long as the water doesnt enter through the air cleaner/filter, nothing should be worried about..water filter is located on top of the engine, should be no problem..and usually if i pass through flood, i will try to use lower gear so the rpm is high, scared if the engine die..haha..and sometime i will turn the aircond off..scared the compressor kong since it is like located at the lower part..
*
The other thing you have to worry about is the alternator.

I would also keep the engine rev high to keep water out of the exhaust pipe smile.gif
dares
post Oct 28 2012, 11:00 PM

Enthusiast
*****
Junior Member
834 posts

Joined: Jul 2011
QUOTE(Area51SE @ Oct 28 2012, 10:35 PM)
Just a Question though....As for Auto rides, How to keep the rev high?? The best is putting it on 2nd Gear but that is also needed to be at a certain speed. What if it's in a Jam condition??
*
L or 2 gear lor. If jam til can't move...shift to P / N and rev lor hmm.gif Havent encounter such situation before, though

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0602sec    0.20    7 queries    GZIP Disabled
Time is now: 11th December 2025 - 09:32 PM