Zhaoshanghao..

Water leaking into the cabin but onto the rubber below the door is not common? Mine both front doors also leak into after car wash. Even the rear both door also 

if water sip in into the door inside leh, thru the slit at miror there? can claim kah cause i tried after wash car, lap finish dry dry liao, then wind down window, and make it back up, window goes wet again

hi guys..need advise..my persona have issue with engine oil leaking after changing timing belt...already done change gasket but still leaking...is it possible the leaking problem came from the oil seals?.. (haven't check that yet)...very frustrated bout it...any sifu can help...

one more thing, my engine tensioner bearing give lot of high pitch noise when the aircond compressor kicks in...any advise for it?...

 

hehehe..my car is already 2 years 5 month.. ...the quality of the oil seals i cannot comment...1st time saw it at that time...will have open up again to check...  

---

Added on June 14, 2012, 3:44 pm

heard bout that rumours, but base on feedback for LM, all very satisfied...i'm ok with eneos (10w 40 is rm95 at my place)..just want to try something new...

quite agree with you about the air filter... ...just want to get that low torque power a bit...easy for overtaking..i think change extractor and crank pulley will help with that...am i right?...will it hurt FC?...

IT20 Denso can get for RM130 only.. hehe.. If u want sources i can direct u there..

Ur tire still a lot of thread.. I just went to do alignment just now..
My tire inside half also botak habis, but outside half still have thread..

Mata tembak burung, see syntium gasak straight...and there is only one 800 left, no 40 weighted, so no exchange.

I post there now....if no taker in short time, might be using on my Civic (now on Honda mineral). Don't know good or not for Hondas.

Tml go zoo negara.
Car suspension seems weakening, anyway to claim it?

Gotten myself a Havoline Semi 10W40 with API SN. Now priced at RM104. Will use it for next non-SC 25K mileage change.

ps. anyone changed their Denso spark at CoSE? Since cannot see them doing work, wonder if they will put their standard plug inside and claim already change Denso liao and walap the plug themselves. You think CoSE ok for changing those there?

on the stciker for next service,the sc only put 5k for the next service,no date,so,i assume need to wait till it reach 5k.very seldom use the car,although car will be having birthday next mont,mileage is only 3.5k.

Any B line owner has the same issue with me..

pedal brake need to step very deep in order to feel the brake force.

I went to SC, they did brake bleeding. Yes it works, and I need not to step deep to brake the car... but within a week, the problem is back.

note: brake pad is just 3 month old, the problem exist already b4 brake pad changed .

     

again Why does it have to do with brake pad????? and i wasn't talking about braking power.

I'm saying the DEPTH of brake pressing.

i give another example..

from 0 to 10
0 brake pedal is not pressed
10 brake pedal is full pressed.

I need to press the brake pedal to level 7 onwards, only the brake pad make contact with the brake rotor.
from 0 to 7, basically the brake pad make no contact with rotor.

0|1|2|3|4|5|6|7|8|9|10

i was asking is there any way to shorten the depth.. for e.g. from 0 to 4 or 5.

fyi, i'm using IMP Platinum brake pads since march, before this, was RapidStop and Bendix MKT.

She only wants to pay 50. The damage cause is way worst then that.

Wafak man! Today on the way to work my behind passenger left door suddenly open even it is lock.  Crazy, I tot what happen when I suddenly hear noise from the back, i thought I accidently press down the windows, then I saw the room lamp is ON! As we know we need to pull the door handle in order to release the locking mechanism, I quickly pull over the road shoulder lor! What happen here?