Hot Toys - TTM20 - TrueType Basic Series - The 1/6th scale TrueType Figure - Advanced Muscular Body

Hot Toys is proud to present the 1/6th scale TrueType Figure - Advanced Muscular Body as follows.

Please refer to the attached photo and following spec for your reference.

The 1/6th scale TrueType Figure – Advanced Muscular Body specially features:

- Approximately 30 cm tall

- Over 38 points of articulation

- Advanced muscular body

- Two (2) pairs of interchangeable palms including:

- One (1) pair of relaxed palms

- One (1) right palm for holding gun

- One (1) left fist

- Suitable for 1/6th scale fabric costume and accessories

- Especially suitable for the T-800 series

Accessory:
- Figure display stand

Release date: Q1, 2013

Remarks:
- All information is subject to change without prior notice.
- The above release date is for reference only. Please check with your local distributors and wholesalers for more accurate details.
- Final product may slightly vary from the pictured prototype

© 2012 Hot Toys Limited. All Rights Reserved.



########################################################

Hot Toys - TTM21 - TrueType Basic Series - The 1/6th scale TrueType Figure - Regular Body



Hot Toys is proud to present the 1/6th scale TrueType Figure - Regular Body as follows.

Please refer to the attached photo and following spec for your reference.

The 1/6th scale TrueType Figure – Regular Body specially features:

- Approximately 28 cm tall

- Over 38 points of articulation

- Two (2) neck styles

- Two (2) pairs of interchangeable palms including:

- One (1) pair of relaxed palms

- One (1) right palm for holding gun

- One (1) left fist

- One (1) pair of thigh muscles

- Suitable for 1/6th scale fabric costume and accessories

Accessory:
- Figure display stand

Release date: Q1, 2013

Remarks:
- All information is subject to change without prior notice.
- The above release date is for reference only. Please check with your local distributors and wholesalers for more accurate details.
- Final product may slightly vary from the pictured prototype

© 2012 Hot Toys Limited. All Rights Reserved.






###############################################################

Hot Toys - TTM22 - TrueType Basic Series -The 1/6th scale TrueType Figure - Slim Body

Hot Toys is proud to present the 1/6th scale TrueType Figure - Slim Body as follows.

Please refer to the attached photo and following spec for your reference.

The 1/6th scale TrueType Figure - Slim Body


- Approximately 28 cm tall

- Over 38 points of articulation

- Two (2) neck styles

- Two (2) pairs of interchangeable palms including:

- One (1) pair of relaxed palms

- One (1) right palm for holding gun

- One (1) left fist

- Suitable for 1/6th scale fabric costume and accessories

Accessory:
- Figure display stand

Release date: Q1, 2013

Remarks:
- All information is subject to change without prior notice.
- The above release date is for reference only. Please check with your local distributors and wholesalers for more accurate details.
- Final product may slightly vary from the pictured prototype

© 2012 Hot Toys Limited. All Rights Reserved.



This post has been edited by BeastX: Dec 11 2012, 05:56 PM

It's available now....@ Toy Hunter

high res:

---

Added on December 21, 2012, 4:58 pmFull set:


This post has been edited by BeastX: Dec 21 2012, 05:01 PM

sculptor:


This post has been edited by BeastX: Dec 21 2012, 06:26 PM

This post has been edited by BeastX: Dec 28 2012, 05:19 PM

---

Added on December 25, 2012, 5:01 amWelcome to arguably the most realistic mass produced minature representation medium to date...

I suppose some shops may display EB's 1/4 Bruce Lee statues or 1st T800 action figure..or Rambo..

BD T800 not till Feb I suppose... One thing on EB though.... You can order direct from them

This post has been edited by BeastX: Dec 25 2012, 05:03 AM

Hot Toys is proud to present the 1/6th scale Hall of Armor Collectible from the Iron Man 2 movie from the Diorama Series, where Tony Stark displays his armors in his basement workshop in the house. The movie-accurate Hall of Armor is highly-detailed and has LED light-up functions, which is suitable for displaying the Hot Toys 1/6th scale Iron Man Collectible Figurine Series, so that you can easily create your own Tony Stark’s workshop in 1/6th scale!

Pls kindly find the attached photos and below spec for your ref.


Hot Toys - DS001A-C - Iron Man 2: 1/6th scale Hall of Armor Collectible Specification

~ Diorama Series ~

The 1/6th scale Hall of Armor Collectible specially features:
- Authentic and highly detailed Hall of Armor
- Approximately 35cm H x 23cm W x 17.5cm D
- LED light-up functions
- Suitable for all Hot Toys 1/6th scale Iron Man Collectible Figurine Series
- Transparent acrylic plate with stickers with holographic-like effect
- Each Hall of Armor can be combined with another to create the diorama setting
- AC/ DC compatible

DS001A - Each Hall of Armor includes 1 transparent acrylic plate and 7 types of stickers with holographic-like effect of Mark I-VII (total 7 stickers)
DS001B - Set of 4 includes 4 transparent acrylic plates and 2 sets of stickers with holographic-like effect of Mark I-VII (total 14 stickers)
DS001C - Set of 7 includes 7 transparent acrylic plates and 3 sets of stickers with holographic-like effect of Mark I –VII (total 21 stickers)


**Prototype shown, final product may be slightly different
**Product details could be subjected to change without further notice
**Figures are not included and are sold separately
**Battery is not included for Hall of Armor, 3A batteries (3 pieces) are required for each set of one
** AC/ DC adaptor is not included

Release date: Q2, 2013

TM & © 2012 Marvel & Subs.

© 2012 Hot Toys Limited. All Rights Reserved.

---

Added on December 28, 2012, 4:43 pm

This post has been edited by BeastX: Dec 28 2012, 05:18 PM

Not for online... but at the shops I suppose.... 1/4 Batman and Bruce just in I think...

speaking or acrylic...

Something I just notice.... If you zoomed in the Pic below, you'll see each mark is behind a slanted piece of glass sealed from edge to edge (dust free)...

However because HT designed the display to vary is size, due to the side panels, the acrylic sheet has gaps (or not meant to be sealed). One would have to custom cut acrylic sheets (of at least 2 or 3 sizes) for the variable display options. At least HT arcylic sheet is slanted as well.

Instead of Stickers, I would prefer HT is give us transparencies that allows use to easily switch out the holograms.



This post has been edited by BeastX: Dec 30 2012, 10:02 PM

You can check xl-shop.com...... Or William7's order page

The pleather straps of my HT Berserker have disintegrated.... the shoulder and skirt with pleather is (likely) going too...