Review
1. As suspected by myself and few others, KPA02 is "base on" HT Barney Ross/Whiplash body. A more accurate description is: KP used the base HT body and:
a) Adding sculpt to the exterior ot the torso, abs, arms and legs so that it varies from HT's.
b) The pelvis shape (exterior/function) remains mostly unchanged except the slight shift of the screw holes.
c) The slight changes to shoulder rotation pin that (inadvertently) makes the Arms modular (you can pop it out of the socket).
d) The internals are almost 100% "recast" based on HT's body. Hence, good replacement/swappable parts for HT's bodies.
e) The whole body from the hips/pelvic region to the top of tip of the neck is the same length as the HT's, the upper legs are longer by approx 0.5 cm, while lower legs would be the same/similar to the extended lower legs (together with extended pegs option too) of HT variants, with standard TT lower legs it's approx 1.7cm longer. Proportionally, KP's legs seems too long.

The Good/Improvements:
1. Materials used are of good (preferred) quality. It gives some flexing while materials used by HT are more rigid which tends to break.
2. Thick PVC material used for the upper torso (which brings a weakness). HT's very thin by comparison.
The Bad/Weakness:
1. The far too thick PVC of the upper torso around the rib area, making it like fat build-up in odd places.
2. The knees bent has far too sharp angles jutting out.
3. The base of the neck is rather loose, so adjustment through a screw at the back would alleviate this, but you can't (which will be discuss in "the ugly").
4. Because of the pin design of the shoulders, it would be more prone to be loose, swinging back and forth over-time.
The Ugly:
1) The claims as a complete in-house KP 3D CAD design.
2) Drill out (Stripping) the "philips" screw head of the 3 screws holding the internal torso together, so no typical screw driver can "expose" further internals. Well, it took me all of 5 minutes dremel, to get the screw to be fully functioning again, I appreciate a good mental challenge/obstacle. The QUESTION: Why create such an inconvenience? (I'll leave it at that)

Personal opinions:
KP did recreate a good alternative body (or duplicate body) with some weaknesses and some improvements. Being a retail product this is bound to be dissected to its basic components and be exposed for what it is. I personally disagree with the methods of with the claims made. I would call a square, a square. Be it HT or any other companies expect their products to be dissected with merits/credits to novelty of design.

Note on pics I've used a compact wide angle camera so there will be some perspective distortion.... I could always break out my DSLR with macro-lens
Pictures: Left (KP02A): Right (Noland's body)
Pelvis:
[attachmentid=3027319]
Abdomen:
[attachmentid=3027320]
Upper Torso:
[attachmentid=3027321]
Odd sharp knees:
[attachmentid=3027322]
Arms/shoulder joint:
[attachmentid=3027324]
Proof on concept. The interchangeble parts of KP's and HT's bodies. Note, because of slight difference in sizes you can't by default use Noland's hips and legs on KP02A's pelvis, a minor mod will be needed to do so (as seen, you'll have no problems doing the opposite). Right: Hybrid as indicated by the color. KP's inner neck peg and Arms/Shoulders on Noland's inner & outer upper torso, connected to KP's abdomen which is in turn to Noland's Pelvic and again to KP's hips and legs:
[attachmentid=3027325]

Odin body: KP02A
[attachmentid=3027331]