forever l33t

mpt? wat is that?

http://www.lelong.com.my/diy-wireless-car-...2-12-Sale-P.htm

i think this is the only solution not to void the warranty for reverse camera.. but yet the camera still need 12vdc.. damn it.. still to much work

This post has been edited by dyso: May 25 2012, 12:52 AM

oh about this..

now i really understood what the other owners are talking about. its really hard to judge the distance from rear view mirror. the boot seems like no ending...

and the thick c pillar doesnt help either when reversing. its even thicker then waja c pillar.. u really have to cross finger n jst reverse blindly...

This post has been edited by WhitE LighteR: May 25 2012, 12:52 AM

magnum.pmp.toto.

got reverse beep sound ma....
beeeeppppp....

hi i wanna ask. can i get back my booking fee (RM500) if i would like to cancel my booking?

u should.. but dun really know

but since he mention one way valve and vvt,i guess it's valve for oil to travel to top of the cylinder where vvt reside, when oil pump keep on pumping the oil to the top of the cylinder while valve already stuck, probably create high pressure and lead to leaking.
This is the same problem in Exora bold that causing cranking sound in cold start

ok here is some info i tested so far.

1. my glovebox is damn easy to close. weirdly there is another car but iafm version with batch numer below 20 from me has hard time closing the glovebox. not sure what change in between.
2. booklet is now all updated to 5 years.
3. successfully pair, download phonebook, and call on my nokia N8. symbian ftw... the mic is located at where i duno but is damn clear... both driver or passenger talk also can hear. so cool...
4. c pillar no sound
5. cvt whining still there. can be abit annoying some times.
6. my brake got like bunyi angin when press.. lolz.. so weird. maybe something down there not lubricated properly
7. at certain bump you will upset the rear something (i nt sure) and it will vibrate abit. nothing to bothering. but you can get all this abit2 noise at certain times if you langgar the hole jst at the right angle, speed and type of hole.
8. gear console got light. ok la... still can see. no complain for me.
9. my tint warranty is missing. SA say not with him also. he say just bring back to him if got problem.
10. pedal shift feels very lazy.
11. car move starting from 1.4k like that. but if really wan to move quick have to press more to like 1.5-1.9k. overall acceptable for me. much improve compare to test unit...
12. can hear turbo spool... so cooool!!

there is mainly three type of noise i notice coming out from engine bay: cvt is most obvious, turbo spool only when step hard or at higher speed, and some wind noise which i suspect comes from the air intake

---

Added on May 25, 2012, 1:05 ambeep cannot help you see car coming towards you

---

Added on May 25, 2012, 1:05 amanyway tomoro i going to test if i have the tak tak tak sound during cold start... i hope not. wish me luck!!

This post has been edited by WhitE LighteR: May 25 2012, 01:05 AM

i tot tak tak tak sound is normal when u start the engine while pressing brake?? @@"
if not mistaken, someone mentioned before that's unlock "sumthing" forget d...

too many sound.. so confuse

This post has been edited by acwatzzup: May 25 2012, 02:03 AM

Congratz on your new ride Bro... Jelly Jelly

Hi WhitE LighteR, congratulations! Finally collected your car, you are one of those who seldom fucuking here about the late delivery, very patient customer!

Is your dashboard (meter there) make noise when you press or squeeze it?
Mine got a little sound, even when you drive pass uneven road.

By the way, I haven't try to look for it, but does Preve have removable air-con filter?

This post has been edited by G K Lai: May 25 2012, 02:18 AM

The sound also could caused by no enough lubricant travel to certain part of engine via oil gallery, so the moving part example valve lifter/rocker arm pivot for vvt or bearing for crankshaft have no mechanism to reduce the friction.

Simple reason possible one way valve(but why during cold start only?) the other one could be the viscosity of the engine oil.

Normal oil pressure is considered to be 10 psi per 1000 engine rpm. Cold oil is more viscous (thicker) than hot oil. This results in higher pressures, even with the cold engine idling. Cold oil problem but less pressure could be either wrong selection of viscosity or oil relief valve do not open large enough.

Seen like TS have no problem for TT de.....

ni tempat di taman paramount.. or some call it seapark..
u stay nearby? theres a roti canai there damn nice wei... can TT next time (but no parking..) haha

I'm so miss the nasi lemak ayam there....

wah kalah itu Toyoda Camary

loan approved?

if not approved, can get back

if approved, depend on your SA.

This post has been edited by V12Kompressor: May 25 2012, 07:47 AM

CONGRATE BRO. me collect today