Anyone here has any experience in buying plant or fish n bring back from thai? if possible I would like to buy some n bring back malaysia.any advice?

How do you bring back? By air? Do u keep in your luggage and check in?? will the bag break due to the pressure when the airplane fly?? Sorry for so many questions. Thanks

I see.. anyone had any experience bring back fish or plant using airlines??

Hi all sifus. I am going to set up a 2ft tank with driftwood and plants. Below are the wood arrangement that i can think of.

a.

b.

c.

d.

e.

although both pieces are from different wood type but this is by far the best that i found. Suggestions??

the tank dimension is 60cm(L) x 45cm(w) x 35cm (H)
The tiles on the floor is the indication of the wood size as it is 1square feet each..Will it look nice if use both wood or just a single piece?

Need help from sifu here

1. my 60cm x 45cm x 35cm tank is currently infested with thread algae. Currently I am using T5HO 24w x 4 lighting and only ADA iron bottom in the soil. Lighting period is 8 hours total with 3 hours on in the morning follow by 3 hours off then on back again for 5 hours. CO2 supply is 2bps. How can I remove the algae?? Tried to remove it with tooth brush but seems like it attached to my plants quite tightly and not easy to remove.

2. my CO2 check valve had backflow after the CO2 being turned off at night. Some of the water in the bubble counter flow into the tubing and pass through the check valve The check valve is connected before flowing into bubble counter and in the correct direction. The CO2 tank is connected to 2 diffuser to supply to 2 different tank. both of the plastic check valve (different brand) also showed backflow after the CO2 is turn off. I have check the solenoid connection with the CO2 tank and into the divider but could not find any leakage..








Any advice please?

This post has been edited by sephiroz44: Jul 28 2012, 12:58 AM

I am using solenoid regulator. The CO2 is turn on together with the light on and off when light off

thanks for all the reply. I will try to increase the CO2 and see how it turns out =D