u r using manual regulator?
how long u on ur co2 supply?

current price for otto how much arr?

I am using solenoid regulator. The CO2 is turn on together with the light on and off when light off

Heres several ways to treat the problem.

Tank treatment, increase Phosphate dosing slightly in your EI fert regime.

Spot Treatment. Turn off filter, use a, b, or c. wait 5 minutes, turn on filter.

a) If you have your phosphate mixed into a solution, you can turn off your filter and dose your phosphates directly on the area thats affected.

b) If you have dry kh2p04, mix your EI dose with tank water just enough to make it dissolve. then pipette/syringe it onto affected area.

c) If you you do not have a phosphate solution, your alternative is Fleet Enema. use 0.3 ml of enema per 10 gallons. Do this daily until its gone since you have no fert regime. Water change every third day 50% to help keep the phosphates from getting out of control during this treatment.

For options a and b, if it keeps coming back on said area quickly, then you need to up the phosphates in your dosing regime. unless you are fine with spot treating the area every dose.
for option C, you run a risk of bottoming out on nitrates during the treatment sue to your lack of regular macro dosing. A high fish load counters this affect. If you have java ferns, this can cause them to blacken at the tips and melt a bit if the nitrates keep bottoming out. The plus side is the baffled look you get from the store clerk when you say, "no im not plugged up, its for my fish tank"

i got a few Q..

1. before this like others bubble counter, there should be water inside it right? so that we can set the bps.. however, last 2 days, the water inside my bubble counter kering already.. what happen eh? dont say my check valve by pass...


2. i google about GSA, as this is my major problem on the plants
whats fert that has phosphate??

thx in advanced

usually hair or thread algae cause is inconsistance co2 supply
if u nt prefer to nuke

try put some yamato or sae
try blackout for 2-3 days

try to do photoperiod straight instead of alternate
pump more co2, like 3bps for a while
on co2, 1hr b4 light on, off 1/2hr b4 light off

I tried to kill them with gila/countless bps. Until yamato looks pening, i slow it down a bit until they're looks fine but still countless bps works like a charm

1. are u using 1 or 2 check valve? i have 2 co2 tank, tank A using 1 valve, tank B using 2 valve. the bubble counter at tank A always dried up after few weeks.

2. seachem Flourish Phosphorus. never use it before.
otto price in AI is rm3.50. if the indonesia worker jadi cashier that day, maybe you can get it cheaper...

anyone want Pelia , Rotala sp Green , Flame Moss , Riccia ?
do pm me, FOC tomorrow at Sungai Chua , Kajang... only available until tomorrow i wont keep till monday...

wht is your tank size?
if 2 feet go for PLL 55Watt...
caused next time u change the bulb rm20 already can get one.. cheap for replacement bulb

aquazonic dont really have any problem... except ballast... but that ballast kinda cheap also at jalan pasar... lolz...

2ft bro, aquazonic is the cheap lighting so far i found. I mean the price, do any substitute brand?

2ft bro, aquazonic is the cheap lighting so far i found. I mean the price, do any substitute brand?

Wat plant u looking for ?

---

Added on July 27, 2012, 9:26 pm
The stone still to big.. Move to back will look nicers

u offering aquascaping service?