my first DIY, noise insulation for door lining using big-D rubber



add-on : the door closing is much solid than before!

This post has been edited by gogoman86: May 31 2012, 10:09 AM

1.3 don't have, but 1.6 SE do have

yesterday was 1.3 CVT vs 2.5 CVT
i was on my way home using Lekas highway, suddenly one Nissan Teana 250 cucuk me
i let him go in front me, then my turn to cucuk him... 1.3 cvt pick up quite impressive, can chase that Nissan quite easily
both speeding at 170 to 180 kmph

This post has been edited by gogoman86: Jun 4 2012, 11:36 AM

mine 180kmph @ 4,800 RPM (still can go up to 5,500 RPM, maybe 190kmph but rather not, i know our Saga limit )

i didn't refer to booklet since bought the car

mine back door, left side rubber keep coming out. doesn't know can we claim for warranty? if yes, which SC is recommended?

---

Added on June 4, 2012, 12:49 pmmy FLX 1.3 has tested, top speed 185kmph but still increasing, haven't know the max yet
anyone willing to send their 1.3 FLX for hydro run?

This post has been edited by gogoman86: Jun 4 2012, 12:51 PM

1.3 CVT

yours is auto transmission, mine is CVT, fuel saver and better efficiency

soften it? then it will expand and become bigger, they should change to new rubber instead making it expand wider

the door rubber itself already expand and bigger than the gaps

---

Added on June 4, 2012, 1:57 pmdon't worry bro, i still prefer auto transmission, more comfortable drive

dare not...

This post has been edited by gogoman86: Jun 4 2012, 01:57 PM

my rear brake no noise since i bought the car til 5 month later, i send in my car for major service (change sparkplug, oil/fuel/air filter...etc.), they open up my rear brake drum, spray with high pressure air, clean the dust, and now, the rear brake giving noise (tak tak tak) when breaking

any SC is recommended to service that or fix that sound? really need to change that drum brake?

dust = no noise
no dust = noise
dust = good thingy

once before i drive like mad, rev high all the way from JB to KL about that speed too (150~160kmph) + routing around KL area, the highest FC i got :
RM69 for 450km, the highest FC for me is 15 cent/km...

i need some idea/advise here, why do persona more comfort? (feel less jumpy and softer)... which part do make it comfort? absorber/spring? my flx feel jumpy and stiff...

anything to do with the spring or absorber? if blm spring is softer and give better comfort like Persona, i was thinking to switch my spring with any BLM here...i mean 'if' it able to give comfort...

i put comfort to my priority, if that BLM spring really could give comfort, soft like Persona feel, then i might think to change it... i don't mind to slow down on cornering
anyone here changed their absorber to 3rd party brand? any better feel like softer, comfortable?

ok, got it... then i might look for some 3rd party spring/absorber almost soft like Vios..

FL very soft? now my current stock FLX cornering at 80kmph no problem...

hmmm... i got the point now... do your FL feel jumpy when cruising at highway above 100kmph? i feel my flx keep jumpy all the way from KL to JB when cruising above 100kmph

suddenly i heard some rattling noise from most front left near dashboard but no idea what thing making that noise... was that caused by flexible exhaust pipe? anyone?

you fixed that noise?

need to put cctv underneath the car

This post has been edited by gogoman86: Jun 5 2012, 03:21 PM

when you going there? let's make same appointment, shoot them gao gao...

dares, how much that FLX badge cost?

suddenly that badges become hot topic

---

Added on June 5, 2012, 5:05 pmbtw, where is Proton Parts Centre located?

This post has been edited by gogoman86: Jun 5 2012, 05:05 PM