Outline ·
[ Standard ] ·
Linear+
NVIDIA 6200, share anythg bout 6200 cards..:)
|
Cyclone87
|
 Apr 20 2006, 09:30 PM
|
|
QUOTE(fillet @ Apr 20 2006, 08:32 PM) wah cyclone87... 6200 so KUAT AH!!!?? my system?? 4 years old.. AMD Barthon Xp 2500+ 2.2ghz Kingston DDR ValueRAM Moselic Chipset 8-3-3 At 200mhz Gigabyte Nforce2 mobo GA7n400-L (used to have NF7S-rev 2.0 BURNED) RM67 CAPALANG PSU RATED 500W(actual output 250W only)  wait cyclone... your test at stock SPEED 300/550 ... 4 pipe or 8 pipe??? my card is stuck at 4 pipe 4Pipe only...anyway..i put High Performence at Nvidia Tab..and my System SuperPi is 29-30sec . QUOTE neiza_ax..........
i believe the difference is the FSB
my FSB is 200mhz.....
his is 306mhz ........ DIFFERENCE OF 100mhz..
that's the main diffrence... I think is not the FSB. It because of some tweaking..and 30sec of superPI.  |
|
|
|
|
|
Cyclone87
|
Apr 20 2006, 09:35 PM
|
|
|
QUOTE(fillet @ Apr 20 2006, 09:32 PM) hahahaha....... My Nvidia settings is QUaLITY anyway.. i'll try to push my FSB a little.. and see whether it can give me 100-200 3dmark03 score increase or not...... my comp has never BEEN OCed at all since i burn NF7-rev 2.0 .. High Memory Speed help..and put it to High Performence..Vsync Off and set value to 255. Can get few hundreds point from there. 300-400.  |
|
|
|
|
|
Cyclone87
|
Apr 21 2006, 12:08 AM
|
|
|
QUOTE(low yat 82 @ Apr 20 2006, 09:51 PM) wa.... 4.2ghz... mine onli 2.4ghz... but at stock gc clock can score around 4-4.1k... @Cyclone87 waa... 30second ...  thats daman fast man... mine d fastest can go onli 38-39 Get venice 3000+ pair with BH5..run at DDR500 5-2-2-2.0 1T at 2.76ghz..can easily do 30sec. If got opteron 146 at 3ghz..28sec i think. QUOTE what value???? memory timings??
my memory won't boot at that timing.. too aggresive 2-5-5?? I mean..runnning at DDR500 ..will give u 100-200 score improvement in 3dmark2003 compare to DDR400 . |
|
|
|
|
|
Cyclone87
|
Apr 21 2006, 10:26 PM
|
|
|
I think i saw the thread that day. Anyway..your luck is good eh. Haha
|
|
|
|
|
|
Cyclone87
|
Apr 21 2006, 10:29 PM
|
|
|
Check..see A1/2 core..or A4.
|
|
|
|
|
|
Cyclone87
|
Apr 21 2006, 10:44 PM
|
|
|
QUOTE(nelza_ax @ Apr 21 2006, 10:31 PM) Riva Tuner. It got the unlock tab if urs is A2/A1. |
|
|
|
|
|
Cyclone87
|
Apr 22 2006, 11:31 PM
|
|
|
QUOTE(nelza_ax @ Apr 22 2006, 11:09 PM) got temp monitor meh?
mine dun hav..huhu...a bit afraid to oc now.. mebe will burn my gc  Bios mod it.  |
|
|
|
|
|
Cyclone87
|
Apr 25 2006, 02:22 PM
|
|
|
QUOTE(nelza_ax @ Apr 25 2006, 01:44 PM) did'nt do anything..juz format.. b4 dis oso got weird prob.. i cannot used the rivatuner to set anything..even wan to oc.... only can open the rivatuner but cannot apply setting anything...  1 more..y my clock are limit at 450 only at rivatuner? That the max clock set in Riva tuner for 6200. You need to edit it yourself to get higher.  |
|
|
|
|
|
Cyclone87
|
Apr 28 2006, 01:57 PM
|
|
|
QUOTE(thefryingfox @ Apr 28 2006, 09:26 AM) darn!!! i changed from axp to a64 and my 3dmarks got lower even if both processor at same speed  previously i got 65xx..after changing, 53xx..i think its the driver....what driver is the best for 6200's? Reformat you PC. Because..i believe your Driver already clash and PCI mode is apply to your 6200. |
|
|
|
|
|
Cyclone87
|
Jul 11 2006, 11:30 PM
|
|
|
Last time, some ppl said 6200 cant run PS3.0 test in 3dmark2006, i think there is posibility to do it now. Try use Riva Tuner and change the driver strings to 6600LE which is 6600 with 4Pipe. That way will allow u to run all test in 3dmark2006.
|
|
|
|
|
|
Cyclone87
|
Jul 13 2006, 10:45 PM
|
|
|
QUOTE(fillet @ Jul 13 2006, 09:21 PM) die loh... my tangan GATAL adi... 6200 vmodders, can post your results???? in 3dmark03 i'm surpiced... haneve's MSInx6200 can go until 450/690.... My MSI NX6200-TD128 can go max... 430/690(i never tried 690 before.. i takut.. but can reach) 3dmark03 5121 at 430/630 mine is 128bit... and FULL load only at 56C(ussing Zalman Vf700cu-led, my TEMPERATURe won't rise.. even after 1-2 hours of gameplay........ got potential to go higher.. but need vmod), how come haneve can reach 70C++?? using original MSI heatsink?? BTW... someone from an overseas Overcloking forum claimed that his MSI nx6200-ts128, which is the same as mine.. can unlock.... HMMMMM His might be earlier batch using A1/2/3 core. Anyway...if i m you , i will sell 6200 off for maybe rm200 den zalman vf700cu for rm100..and top up rm20-40 to get 7300GT. Even running at stock..you get 9-10k 3dmark2003. |
|
|
|
|
|
Cyclone87
|
Jul 14 2006, 12:55 PM
|
|
|
QUOTE(low yat 82 @ Jul 14 2006, 08:37 AM) more info ab driver string.... btw, is it onli capable done wit d latest rivatuner? Nope..old ver also can. I cant tell you the step to do it..because i not using Nvidia card a the moment.  |
|
|
|
|
|
Cyclone87
|
Jul 14 2006, 06:53 PM
|
|
|
QUOTE(fillet @ Jul 14 2006, 03:22 PM) i cannot change to 6600LE leh.. only got 6600 6200 for me to choose and 6600GT, others is unknow device.... There is an option for it. I done that before on my 6200 using Riva Tuner ver 15.5 which kinda outdated last year. |
|
|
|
|
|
Cyclone87
|
Jul 16 2006, 07:56 AM
|
|
|
QUOTE(fillet @ Jul 16 2006, 01:41 AM) hey, can msi nx6200 be flashed with sparkle 6600 bios???? i read the forum in www.xtremesystems.org, some have flashed sparkle 6600 bios onto LEADTEK 6200 That because the leadtek 6200 already unlock to 6600. So no problem for it to flash to 6600. |
|
|
|
|
Quote
0.0314sec
0.54
7 queries
GZIP Disabled