nope...
unless u hv winbond chip...

why dun u try on micron, tccd n see...
check the temperature urself...

on such a hot enviroment, dun think the ram can survive.
even 2.8v is enuf to kill the ram.

tccd cannot tahan such a high voltage of 3.0v for too long...
even is yr 05.
try believe it...
it is different for tcc5 rev.f and tccd in terms of voltage.

This post has been edited by Westley: Feb 1 2006, 04:51 PM

most important is temperature...
e.g., under a cooled condition, 20c room temperature, mayb u can add to 2.9v...
coz the ram will hit for 45~46c under normal room temperature(33c).
absolute ram killing temperature for tccd

for the temperature, 2.7~2.75 is enuf for tccd.
dun tell tat ur tccd nd high voltage...
as what have been tested, voltage only helps on few attempts.
after tat, no matter what voltage u use, it won't draw more mhz for u.

well, as much as i can said is good luck to kcnyc.

the heatspreader of mine tccd reach that temperature...
and it is pretty dangerous, bcoz i'm using 2x 40mm sunon fan to blow on it...

and hv u all try to feed it for 3.2v?
well, i hv tried, at the past it can do 300, wif weird timing...
but, it can't do cl2.5 anymore @ 400mhz...

those is the past testing...
for those xms pros series i dun recommend to gave more voltage applied on it, especially anything more than 2.8v...
or not, rma sure will be...
there is some in LYN also hv those problems...

well, hv tried on other pair of tccd, this time is not extreme, 2.8v...
but, still it gave me those funky reponse...
keeping bsod when archieving 275 only...
now that pair in rma process...

and again, 2.8v also gaving cl2.5 can't boot, for those using OCZ EL pc3200(tccd)....
bigtoe said is the spd chips facing problems.
but dunno...
since may in XS also facing it...

dunno what is the cause, but tested wif some mobo of nf4, from dfi ultra-d, to gigabyte, and sli-expert...

back to topic for the xms pro series, tested on few pairs, not every pair of rev1.3 i hv tested work greats...
infact, 2 pairs can't boot in my system if running dual channel.

so, i use a p4 s478 to test, and i gave me different result.
using CPU-Z to check on those chip's info...
the model i get is some stick show CMX512-3200, some is CMX512-3200pro, and 1 stick gave me this info: CMX512-C2PRO.

guesting tat it is some unqualify chip for high speed eg, C25 and PC4000 series.

gsan, what voltage u do to test for 2-2-2-5 @ 200?
my pair can do on 2.6v only

Compatibility issue testing...

found it weird:

see the different?
1st stick show c2pro, 2nd show normal corsair cmx

http://valid.x86-secret.com/show_oc?id=71760

CPU : AMD Opteron 146 (UP) (*1)
CPU PSN : AMD Opteron™ Processor 146
CPU EXT : MMX (+) 3DNow! (+) SSE SSE2 SSE3 x86-64
CPU Cache : L1 : 64/64 KB - L2 : 1024 KB
Core : Venus (0.09) / 0xF71 / E4
Freq : 2009.27 MHz (200.93 * 10)
----------------------------------
MB Brand : DFI Corp LTD
MB Model : LP UT NF4 Expert
NB : nVidia nForce4 rev A3
SB : nVidia nForce4 MCP rev A3
----------------------------------
RAM Size : 2048 MB
RAM Freq : 200.9 MHz
RAM Type : DDR-SDRAM Dual Channel
RAM Ratio : CPU/10
RAM Timings : 2-2-2-5
----------------------------------
Slot 1 : 512MB (PC3200)
Slot 1 Manufacturer : Corsair
Slot 2 : 512MB (PC3200)
Slot 2 Manufacturer : Corsair
Slot 3 : 512MB (PC4400)
Slot 3 Manufacturer : Gskill
Slot 4 : 512MB (PC4400)
Slot 4 Manufacturer : Gskill

This post has been edited by Westley: Feb 14 2006, 06:56 PM

http://www.madshrimps.be/?action=getarticl...609&articID=397
there is some info

http://www.xtremesystems.org/forums/showthread.php?t=67762
Gundamit | 2x1GB Patriot PC3200 LL - Infineon BE-5 | 2.5-3-2-6 1T @ 265MHz | 2.75v | Link! - SPi 32M Stable: Yes
Professor12 | 2x1GB Mushkin Hi-Perf Blue - Infineon BE-5 | 2.5-3-3-6 1T @ 262MHz | 2.7v | Link! - SPi 32M Stable: Yes
varzmaster | 2x1GB Corsair ValueSelect VS1GB400C3 - Infineon BE-5 | 3-4-3-7 1T @ 260MHz | 2.8v | Link! - SPi 32M Stable: Yes
NinjaWreck | 2x1GB Mushkin Hi-Perf Blue - Infineon BE-5 | 2.5-3-2-6 1T @ 258MHz | 2.9v | Link! - SPi 32M Stable: Yes
rise4310 | 2x1GB Mushkin Hi-Perf Blue - Infineon BE-5 | 2.5-3-3-8 1T @ 257MHz | 2.75v | Link! - SPi 32M Stabe: Yes
CP-Geek | 2x1GB Corsair CMX1024-3200C2 v1.2 - Infineon BE-5 | 2.5-3-2-6 1T @ 255MHz | 3.0v | Link! - SPi 32M Stable: Yes

this shows that average Be-5 doing 250+/-

the timing satisfied for me, using such a low voltage.

u can go to houseofhelp and ask the ramguy
he is the only one to know it
we are not the source, so nextime please be clear on how to get the source.
as a good learner u need to know how to visit ur hardware manufacturer website, fans site, tech support site, u need to know how to use google and wikipedia to enrich ur knowledge also.

It depends on rev
different revision means different chips
not all IC is tccx
not all can do ddr600

promos and mosel are the same company.
juz different is promos might gain higher oc ability.

depending on revison...
if it is v1.2, then is tccx

u hv a chance...
some even can do cl2.5@ 250

u mean 3200 with 3-3-3-8 timing?
no record.

but previous, got some shows there's been:
winbond
infineon
nanya

so either one will be.