mod start at 3am in the morning ends at 4pm this afternoon...

mod start from:

-drawing with a little bit of google (on paper)
-drawing on case (side panel + top) *WARNING measurement r importance
- uninstall all component (clean heat sink and other fan)


time for cutting the steel
-tools used : grinder(with cutting steel disc) + drill(*guna mata drill yang sesuai dengan saiz lubang screw)
-start cutting with side panel first
-then the top part of the case this part really need to patient and powerful hand control



-now clean the case from any dust or unwanted things such as sticker
-wash it water *optional
-wipe with dry cloth

spraying my case (skills and experience is needed) *i not spray my side panel because i will make further change
-i choose black for all (inside and outside)
-need to spray at open space + sunny day to make colour "berseri-seri"
-2 layer black spray and the last one with clear, total 3layer *i don't need undercod because my case already black
-wait till it dry (after 1st layer wait, after 2nd layer wait again, after 3rd layer wait till dry... )

the most step i hate
-install all part slowly to avoid CALAR!!

at last!!
-i install 14cm(Aero cool blue) exost fan on top


sorry for my rojak writing..hehehe

my side panel concept (not finish yet) **considering acrylic as side panel !!!
-receive my 22cm fan today
-pening nak letak kat mane hahahaha



updated:


This post has been edited by ayoyai: May 6 2012, 01:34 PM

Nice
Should place this topic under Worklogs topic,

This post has been edited by Effy92: May 2 2012, 07:43 AM

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
thanks for visit my worklogs

a little advice from me :
-safety first
-marking is crucial
- take your time when doing the mod...no need to rush unless u had to use case urgently
!!!! u should put cover for your fan, or else is bleeding

material used:
-metal (case)
-acrylic (front and side panel)

---

Added on August 22, 2012, 12:38 am

---

Added on August 22, 2012, 12:40 amlast modification is on colour

just name it ''innocent white''

This post has been edited by ayoyai: Aug 22 2012, 12:40 AM