blow off sound ahaha. or engine sound/nos.

anyone here start to play with FR chassis already?

front mount, rear wheel only?

i think that carpet u can get in shop, but dunno how u're going to stick it on your surface.


any flat surface will do la. the Japs play only on cement or their road hehe.

eagle racing are good

what item u're comparing?
for me, anything with moving parts, i'll go for original manufacturer.
if it's just alloy part, eagle racing is good enough.
got one friend using eagle racing steering, mod for his fijon, very satisfied i can say.

for ur FOW, both wheels have same amount of free wheel spin? or one side will stop first then only the other side?

bump.

yup hopup mostly changing plastics to alloy.

anyone have plan to get titanium screw set?

10' caster set. just do it.

should work.

drace dekat mana? sunway giza?

try to look for r31 kit body only without electronics, cost about 160
then buy brushless combo (9t ezrun with 35a esc) around 300+
get a lipo battery (120)
fast charger (120)
pick your bodyshell (60-200)
remote (200-600)

dont buy 416 its more for touring

better than buying a RTR for upgrade later.

the stock UJ/differential is bound to fail. the clone quality is quite rubbish for mechanical parts. lol

bump. so quiet

wats ur budget? less than 100 can get bluebird metalgear. speed 0.08s i think

if not mistaken it is bms-631mg hs servo.

http://www.hobbyking.com/hobbyking/store/_..._10sec_46g.html

saw the new r31 linked rear suspension set, do you really need that much traction at the rear?

ni bro
http://banzaihobby.com/index.php?main_page...oducts_id=13462

it says can give camber adjustment on the fly, as and when your damper changes.
so you will always have traction exiting corner. not sure if it's practical in RC anyway. wait till there's a user review. haha

front UJ is 48mm, rear can use 51mm

if you're free at night tonite, go to MRC puchong, ask for fijon UJ. as good if not better than eagle racing. look for Wong there... not sure if have stock, but worth a shot.


eh wait you're not in klang valley rite?
then take the eagle racing.
my advice, get a rim with at least 5mm offset. better if can get 9mm offset. pair with 200mm body. clone kit have tendency to rattle a lot on the front wheel, UJ easier to broke. just from my experience. without offset the rim very close to your c-hub when turning and sometimes it brush each other

This post has been edited by ayiesz: Jun 16 2012, 10:10 AM