Check your trims.

To Eric,
Just went to mod cheras to have a look to street jam ota r31 . Getting myself poison.

There is a second hand chassis. R31 full plastic. But change to a blue color damper. Front one way and rear lock already. Worth to get? Rm550


I also want to order stuff through you already. Battery. Servo and motor. And some accessory if I get the chassis.

This post has been edited by robinloh21: Jan 5 2013, 11:35 PM

RM550? How's the condition? Original or clone?

Let me know what you want to order, I might be having a shipment coming in

Ori chassis. Not clone.
It is used but in good condition. The owner went outstation for work. Keep the part and sell the chassis

Try to negotiate for better price lo

Best price already, that's why ask advise from you ok or not.

The Damper cost 200 plus. The one way front also around 70 I guess. New chassis cost 950

.total also save quite a lot to spend on other thing to build up the car

Not bad. What else included?

The R31 chassis would be good for CS-drift

Only chassis , from want way and rear also change . And also damper.

Another offer will be from Kar Mun, which ota r31 rtr.

Get your own electronics.

if he can proof that the front one way and dampers are original, grab it. very good deal.

one way must be ori. all replica/clone/china made not good enough.

It is Wong the mod boss reconmmend me one the r31 chassis alone offer.

Damper cost 200 plus and one way cost around 90 . So I think is genuine part.

How about kar Mun set. Izit also original?

HI Eric, Thanks .
Im new with RC.
Can u provide any specific sites so i can learn about this problems.

Do you have your user manual?

If not, download from here and read through.

Thanks Eric, this manual looks easy to read compare to mine (chinese version)
Im using HL518 belt

Good luck

Taken my first step. Taken over Kar Mun car and everything he have.

http://forum.lowyat.net/index.php?showtopic=2554846&hl=

But he also forgot what is the battery capacity. How I suppose to set the correct value to charge this lipo battery?

Just charge. Dont need to set.

Unless the battery capacity is above 5000mAH.

Should I put like 2.0 A or 3.0A or......
Cause the lipo balance charger can set the rate for charging

3.0 to be safe

so robinloh21 how's the kit?