Don't know what happen. You might either customize the ram amount or select the largest or 2nd largest amount from the drop down list.

4.5Ghz@ less than 1.2V.. Haihzz this is gud result from my view. If only 920 can do that sure naisss

Good enough? Then it's a great news for a newbie like me. Hopefully my next gpu also golden chip. Hehe...

Btw, you should run the stress test in Diagnostic environment to minimize the usage of RAM by other application & then only you could maximize the total RAM for stress purpose.. Just from my PoV

Do you means no Aero etc? Currently all AV, and other unnecessary apps are close and stopped.

Nope, run the msconfig, tick Diagnostic mode & reboot

Edit: Overclocking aint that easy. Speed without stability is nothing

This post has been edited by gengstapo: Jul 31 2012, 09:19 PM

Okay, will try tomorrow boss. BTW, Prime95 started at 1730 until 2130 RAM and CPU fully stress, working fine. I lazy to take screenshot as opening apps will make my system lag due to low memory warning. Now need to off generator. Have problem... I thought can Primed until 2300 tonight.

Hmm I long time didnt run Prime95 as stability test purpose. I only use Linpack or IntelBurn Test
Faster to get result.. IMO

Thanks for the advice boss. Hehe... Tomorrow will try. I wish I still working at city instead of at jungle now. So boss, you run Linx then no need to run Prime?

---

Added on July 31, 2012, 11:21 pmBTW boss, I just try to execute Linx just now. Only able to run at 5120 memory. Is that good enough? Hmm... Will try revert to stock setting tomorrow and try max memory.

This post has been edited by diaBoliQu3: Jul 31 2012, 11:21 PM

before i run prime95 7 hours plus untill got error (1 worker stopped working)
with LinX i just need to run it for 3 minutes then got error....

I only run LinX & Futuremark on CPU test.. So far I havent have instability issues

The 5120MB when you select "All" for RAM in the LinX option? Im running i7 old family with 6GB RAM. In Diagnostic mode, I can see it would take upto 5.7GB of my RAM when running Linpack

Hmm so is this mean the Linpack better than Prime95?? Only god knows

This post has been edited by gengstapo: Jul 31 2012, 11:53 PM

6 hours prime between my sleep time and got warning Motherboard -3 centigrade on the AI Suite II. Anyone else had this lol? Can ignore?

i5 3570K (full load 64-71C)
Asus P8Z77-M

it depends imo...
hmm in my case LinX proven 2b better..after i finished 100 run (4 hours++) of LinX..then i proceed with prime95...
for starting i put offset +0.005v all tested with LinX then up to offset +0.020v
i can see the pattern of failure (longer time taken before LinX got error) 30mins,42mins,1 hour++,.....untill 4 hours plus done for 100 run
then i did prime95 and it can last for 12 hours....till i end it with none error occurs

in before during i had a faulty stick of ram...i've gone thru 7 hours plus with prime..but LinX detects that error within 3 minutes (as told b4)
i'm not judging linX is better coz i'm no pro..hehehehe

that's annoying AI sensor problem. Just ignore it or turning off the warning alert in AI probeII while running stress test. Or terminate the AI suite,

CPU-Tweaker 2.0 Beta 15

http://www.tweakers.fr/download/CPU-Tweaker.rar

-Replace Core VID by VCore.
-Add VDimm on some chip.
-Best XMP Profile is show now instead Jedec Profile in main window.

testing my BBSE.....



Edit:

Added 3 digit Vdimm,link same.
Pack my BBSE in box for tomorrow delivery.
Testing with spare RAM:



This post has been edited by stasio: Aug 1 2012, 07:02 PM

May I join? Just finished setting up my Ivy system last night.

Adjusted the multiplier to x45, LLC to high, HT to off, everything else on stock. And I can bet I'm the only one here with an OCed i7 on Intel-branded mobo

i7-3770k @ 4.5GHz by pixeltailz, on Flickr

This post has been edited by Dreamworks: Aug 1 2012, 10:02 PM

OK,but why not 4/8 cores (you should have GFlops ~100).
My 4/8 for 4.5GHz stable is also arround 1.225V.

This post has been edited by stasio: Aug 1 2012, 10:09 PM

You mean should turn on HT? Because I read from OC guide somewhere to turn off HT

Now 2 hours liao and still running strong, gonna try with 4/8 cores afterwards. Surprised that the temps are around 80, I'm just using Hyper 212 Evo and not some big hsf or wc...

---

Added on August 1, 2012, 11:07 pmWeird. I turned on HT but GFlops dropped to ~60 only Must be something wrong somewhere, or is it due to my RAMs?

This post has been edited by Dreamworks: Aug 1 2012, 11:07 PM

This is my fast 4.5GHz setting and temp(without tweaking).

IBT gave ~99GFlops but LinX only ~62GFlops. I thought they are essentially the same, but why 40GFlops gone with LinX

This post has been edited by Dreamworks: Aug 1 2012, 11:56 PM