Helloe To All Sifus

I'm still newbies here .. Would like to learn OC ..

I Just complete all my things was ready to OC ..

Here my Spec :
I5 3570k
Z77 Extreme 4
Corsair H100i Hydro Series
Kingston HyperX Beast 2400mhz

Never done OC before.. And really don't know ..
How to OC

But its look like.. My spec was ready for OC ..
Any 1 can teach me ?

Also .. What's software do I need to monitoring
Temperature?
Any link I can watch before I started to learn OC?

Thanks Guys

Pls check out Post #1 of this thread for OC Guides and temp monitoring app (RealTemp).
Good luck

OK sir .. Thanks ya
Will update soon

Hye Alls Lyn.NET

Newbies Here..

This Is my First OC with This result..

is This OK ? with my Spec?

Intel Core i5 3570k
ASRock Z77 Extreme 4
Corsair H100i Hydro Series
Kingston HyperX Beast 2400
Kingston SSD V300
GTX 560 TI

And This is my result For my First OC
With Help Guide From Lyn.NET Mamber

Casing Fan Air Flow Position ~

Front :
140mm x1 Fan
120mm x1 Fan
Intake

Side :
120mm x1 Fan
Intake

Rear :
120mm x1 Fan ( CM Excalibur Fan )
Exhaust

Top :
120mm x2 Fan Above Radiator H100i
Noise Blocker Fan = Intake

This post has been edited by Lokie90: Sep 18 2013, 10:46 PM


Attached thumbnail(s)

Welcome to the club mate. Somethings are not right in your OC.

1) your idle temps are way too high. What's your ambient (room) temp?
2) vCore = 1.25v for 4.0Ghz is too much. Try lower vCore ie. 1.225v, 1.2v, 1.175v, 1.15v, 1.1v, 1.05v etc...
3) your prime95 version is kinda old. Pls try the latest version 28.1 Build2: http://www.mediafire.com/?pj2erd72t1oyb8n

owh .. i see
Thanks Ya.. Later i Try again ^^

will update u the next result

( WTAsk )

I'm using Corsair H100i

Why my CPU block icon LED colour changed to RED colour ya?
Before This Blue..

This post has been edited by Lokie90: Sep 19 2013, 12:14 PM

I think you should refer to user manual for more details.

Hi all kinda new here too but I managed to oc my 3570k with as rock z77 xtreme to 4.2ghz. Regarding to stress test cab we use the both 1322 mfft and 1792mfft custom test 15min to test the stability? Cuz its stated there for sandy bridge users. :/ can't upload my pic cuz p1 wimax down T.T

I haven't tested the 1322/1792 with Ivy but I think it's applicable for any platform.

pls check the cpu pin on the mobo as well, see got any pin bent or abnormal? I also faced it on my maximus vi hero when I re-install the cpu, cannot get dual channel nor chA1/chA2 working (Qcode 55)...and found out the got 1 pin abit bent, so I fixed it back and finally can boot up as normal.

Ya, sometime when u sit the IHS back to the socket, the uneven pressure might cause this problem. Make sure u put the IHS evenly.

how to read this IC code?

XXXX2400......
http://www.xtremesystems.org/forums/showth...t-G.Skill-s-SNs

Just tested. The latest LinX 0.6.5 (11.1) is still yielding 120+ GFlops for Ivy.



Haswell will give 200+ GFlops and most ppl will hit TJmax when stressing as low as 4.5GHz

to buy Ivy or Haswell for OC & gaming? Its new set btw, The last time I OC was Q6600 & E2180. Please advice sifu.

any sifu want to letgo 3770 or 2600 can PM me. thanks


take Haswell and never look back

but you are looking for 3770 or 2600?? and you ask me take haswell?

i have to stick with old lga1155 mobo.

but ur case different, buying new set mar.
cheers

cheers bro, I read somewhere saying that if going for OC Ivy chip is better than Haswell in term of heat dissipation??