yes. as long as u make it invisible. Using putty will not work because there will be no color to cover it. u will have a patch of gray....


GREAT!!!!!! sure. Make sure u r using Bandai's kit.

This post has been edited by rayloke: May 17 2012, 11:15 AM

since this GB are base on internet and also judging also from internet (judged by looking at the photos only)
so you guys need to have a good picture to avoid loosing points

taken from some website....this is how roughly the idea on how to set up your cheap simple shooting booth

and even using your phone camera will produce nice result (but i still recommend you to use proper PnS camera at least)

setup is something like this using 2 table lights, 1 DIY diffuser and 1 white card/board/styrofoam (to bounce the light and reducing shadows)


the diffuser are made from cardboard box and the filter are made from tracing paper


do note if you only have phone camera to shoot with unproper lighting, you might lose points even that how nice you finish your kit.... if you picture are unclear and blur

so do take some effort borrowing proper camera or go to ICW to snap your photos

...also i keep reminding this, its good to have a picture with just one color background
i saw some pictures here with white upper background but below is black, pls try to use just one color

This post has been edited by VincC454: May 17 2012, 11:55 AM

(sorry off topics)

suggest to make full tutorial on product photography . . . the detail are not sharp enough when zoom, even use dslr with low aperture

lol if i explain aperture all in here...then nobody will have mood to join the GB already cause they will see complicated

i show here to give an idea a simple way and the cheapest way to snap a photo...

if the setting of your DSLR...i think photography thread there got tutorial how

Noted. This is the box. Thanks.

yes, totally agree with VincC.

Bad photography in an online GB or competition, means all your effort goes down to drain.....

---

Added on May 17, 2012, 10:06 pmHuhu, just posted my entry: MG 1/100 Wing Ver.KA

http://www.pla-zone.com/index.cgi?action=d...read=352&page=1



C&C welcome!!!

This post has been edited by rayloke: May 17 2012, 10:06 PM

Finally, I got a mail today!

Er... i realised something about my built, pointed out by a friend named Renny:

Actually i terbalik the skirt... front-to-back.... in fact, i terbalik the entire groin part..... huhu, NOOB!!!!

this is absolutely phenomenal...

new wip
will do some seam line remove and some weathering

actually i finished this last week, but haven7t had time to take proper photos. here7s a taste of things to come


a quick question: i painted almost all parts except the gold, which was only sprayed with flat topcoat. does it still count as snapfit category?

Thanks for the kind words

Gambate bro!!!!! Just reminder, not much time left.....


Yes it is. as long as original plastic color is still visible.....

This post has been edited by rayloke: May 22 2012, 01:18 PM

Hi bro Rayloke,

I just want to ask for my LBX.. is it ok on the lighting? and the OOB already open? I haven't submit in the lbx lucifer, just submit in the the lbx elysion only for the straight build.

Cheers,

Actually if u go to the thread u posted, there r already some comment on your kit ady.... actually your photos, out of focus is the main problem.

For OOB, yes, it's the section under snapfitter zone - Gunpla zone.

http://www.pla-zone.com/index.cgi?board=g

There r already a few threads by other participants opened there ady. u can post there. Do check out other people's work n give some comment if u want

oh ok.. thanks for the fast reply..

I was over bz and outstation again, hmm I will try to retake the picture.. if can.. if really cannot than I had no choice than to just leave it at it is.. sorry

Updates of Completed work:

Snapfit Catergory


HG 1/144 Unicorn - modeled by RPKK
To check out more photos n give comments, click: http://www.pla-zone.com/index.cgi?board=h&...play&thread=332


LBX Elysion - modeled by ascentic
To check out more photos n give comments, click: http://www.pla-zone.com/index.cgi?board=h&...play&thread=344


MG 1/100 Zeta Plus - modeled by GravityFi3ld
To check out more photos n give comments, click: http://www.pla-zone.com/index.cgi?board=h&...play&thread=306


NG 1/100 Regen Duel - modeled by ra2zy
To check out more photos n give comments, click: http://www.pla-zone.com/index.cgi?board=h&...play&thread=350


MG 1/100 Wing KA - modeled by Rayloke
To check out more photos n give comments, click: http://www.pla-zone.com/index.cgi?board=h&...play&thread=352

For a little update on those already submitted:

OOB Category

MG 1/100 Gundam MKII - modeled by Chriswoo
To see more photos click: http://www.pla-zone.com/index.cgi?board=g&...play&thread=280


HGUC 1/35 Core fighter - modeled by ASAP
To see more photos, click: http://www.pla-zone.com/index.cgi?board=g&...play&thread=331


NG 1/100 Tierren Ground Type - modeled by -ASAP
To see more photos, click: http://www.pla-zone.com/index.cgi?board=g&...play&thread=274


1/100 GM ground Type - modeled by mechaion
To see more photos, click: http://www.pla-zone.com/index.cgi?board=g&...play&thread=366

1/20 Scoopdog Berkoff Squad - modeled by ASAP
To see more photos, click: http://www.pla-zone.com/index.cgi?board=g&...play&thread=367


Please do check out the threads n give some comments. Let's support each others work!!!!

Great! My works are up... Hope to see others masterpieces

bro, u r the most hardworking one!!!!

True True, really hot these few months and excited too after much learning. Wife not too happy too! Need to reconcile the time.