TM need to provide options for users to pay more for higher cap instead of just throttle.

Well I will give a feedback to them when it comes into implementation.

mmmm...

itchy itchy... scratch scratch...

wow..biz 30 is out tim...

guys, what is the MTU rate for unifi vip 5?

1492 max

okay..
MTU max 1492
run cmd

ping to www.google.com -f -l 1492

packet fragmented

75% loss

minimum time 40ms.

can i adjust till i got the suitable mtu? will it break anything like portforward,port trigger etc etc?

Here is my unify VIP5 speedtest result. It happened since yesterday.
Is it throttle?

it doesnt work like that
max mtu is 28 + min
28 is to account for icmp and ip headers.

try pinging at 1474

---

Added on June 29, 2012, 9:36 amdid u do this over wire or wifi??

This post has been edited by cstkl1: Jun 29 2012, 09:36 AM

I had checked.

Speedtest over wire via desktop is normal.
Speedtest over wifi via IPhone is normal.
Speedway over wifi via another desktop is abnormal as result I post b4.

Any one can tell me what happen?
I never change any setting to all PC and router.

Thank you.

been there a while back.

when there is a flux in tx and rx between ure desktop and router.
seems to me always linked to a preamble issue.

how far is the desktop??

This post has been edited by cstkl1: Jun 29 2012, 02:54 PM

Hi guys, for the TP-Link TL-WR1043ND wireless router, does the firmware "TL-WR1043ND_V1_120210" support UniFi? I can't seem to find any option to enable "UniFi mode" under the WAN settings.

Sadly no, only TL-WR1043ND_V1_110906 is able to.

my 4th application with @rattan for my auntie as always super fast. Installed within 5 days. Very good. Well done rattan.

Thanks for your reply.

Checked with TP-Link support earlier today and they mentioned that the latest firmware in the Malaysian website, i.e. "TL-WR1043ND_V1_120210" supports UniFi. Hence, I skipped 110906 and went straight for 120210. Looks like I have been misinformed!

Is it possible for me to downgrade the firmware to 110906?

It's here again...FRIDAY.

Slow speed already for VIP5.

Raise your hand if you feel it.

I will if you drop the colors from your messages...



This post has been edited by rattan: Jun 29 2012, 04:22 PM

Anybody tried the TP-Link W8961N Wireless router (replacement for W8960N) with Unifi? I can't find the setup Unifi instructions for this router anywhere (also tried unifi.athena.my and klseet.com) except those for W8960N. The interface for both routers is different so I can't use the W8960N's Unifi setup instructions for the W8961N. Anybody can help me?

This post has been edited by The Punisher: Jun 29 2012, 05:19 PM

yeah i also got duped by that.

unifi 5 checked.. full speed
unifi 20 checked.. full speed

no hand raising.

i seriously think u should keep complaining about other things than speed and forced them to change you to a new port.