Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 [WTA] Anti-Leakage Protection for Bathroom, In a condo

views
     
TSKerry1136
post Mar 29 2012, 08:10 PM, updated 14y ago

One Decade Old
******
Senior Member
1,925 posts

Joined: Feb 2006
From: Petaling Jaya


Hey bro's/gal's,

I've heard that anti-leakage sealant is a huge concern for condo's because if its not done properly and causes a leak at the lower floor. Once complain have to re-hack entire toilet tiles again.

So I was given several options by diff contractors and some even offered 3 layers of anti-leakage protection but there was one specific contractor says to maintain its current tiles and add-on another layer of tiles on top of it. It will prevent the leak.

Is this true or is it possible? Reason I ask is his quote for the entire place was the cheapest among the rest. Don't want this issue be a show stopper.
JinXXX
post Mar 29 2012, 09:07 PM

Look at all my stars!!
*******
Senior Member
2,516 posts

Joined: Feb 2007
From: Uarla Umpur



what will he be laying on top of your tiles what like of coating ?

please know the best and long term solution although abit expensive

is to hack out tiles and do a real water proofing...
enriquelee
post Mar 31 2012, 09:58 AM

Don't ask for more, ask for COKE
********
All Stars
10,510 posts

Joined: Jan 2003
From: Atlanta

What is 'anti-leakage sealant'?
And it can prevent leakage to lower floor? shocking.gif
cavynz
post Mar 31 2012, 03:56 PM

Casual
***
Junior Member
367 posts

Joined: Nov 2005
if you experience the water leakage on your current tiles, putting on a new layer of tiles on top of existing tiles will not solve your problem. This is lazy work proposed by contractors. I agreed with JinXXX, the best result is to remove all the old tiles and do a real water proofing .
stevie8
post Mar 31 2012, 05:31 PM

Regular
******
Senior Member
1,365 posts

Joined: Jun 2009
QUOTE(cavynz @ Mar 31 2012, 03:56 PM)
if you experience the water leakage on your current tiles, putting on a new layer of tiles on top of existing tiles will not solve your problem. This is lazy work proposed by contractors. I agreed with JinXXX, the best result is to remove all the old tiles and do a real water proofing .
*
It is not only lazy work. The tiles will come out piece by piece later on. The tile surface is always smoother than bear cement and adhersion to tile is a problem. Your new waterproof that is suppose to work under normal application cannot work properly in this tile on tile situation. Some use a special glue on the old tiles before waterproof, some deface the old tiles with acid just trying to get the old tile stick!!!! All these trying to tell you it is hard to work and get adhersion. So dont do the lazy work, ever.

This post has been edited by stevie8: Mar 31 2012, 05:32 PM
TSKerry1136
post Apr 1 2012, 11:26 AM

One Decade Old
******
Senior Member
1,925 posts

Joined: Feb 2006
From: Petaling Jaya


Thanks!

I believe they propose that way to lower down the cost and win the contract deal.

That is why I'm comparing with other contractors. So the best would be re-hack the tiles and apply water proofing again before adding on the new tiles ya?
enriquelee
post Apr 1 2012, 11:45 AM

Don't ask for more, ask for COKE
********
All Stars
10,510 posts

Joined: Jan 2003
From: Atlanta

The most important thing is, make sure the finished floor level have a good gradient to drain off the water properly. Waterproofing is just a double assurance.

 

Change to:
| Lo-Fi Version
0.0165sec    1.02    5 queries    GZIP Disabled
Time is now: 19th December 2025 - 03:21 AM