just drive the full spec version car inside factory.. damn good..you can hear the air intake sound during fast acceleration..
Proton Prevé V2, Drive it to Believe it
Proton Prevé V2, Drive it to Believe it
|
|
Mar 27 2012, 02:05 PM
Return to original view | Post
#1
|
![]()
Junior Member
43 posts Joined: Oct 2007 |
just drive the full spec version car inside factory.. damn good..you can hear the air intake sound during fast acceleration..
|
|
|
|
|
|
Mar 27 2012, 02:20 PM
Return to original view | Post
#2
|
![]()
Junior Member
43 posts Joined: Oct 2007 |
Added on March 27, 2012, 2:06 pm any comment on the plastic quality and the NVH level? [/quote] for the premium model not much plastic part look like, the shiny darkwood panel and some chrome finish part at the aircond and trim give more attractive look.for NVH level , i would say above than average but not perfect enough, they already upgrade the underneath insulation more then two inch ,previously only one inch for persona , so that will give better sound proof inside the car.for high speed test , i still didn't test it. |
|
|
Mar 27 2012, 03:17 PM
Return to original view | Post
#3
|
![]()
Junior Member
43 posts Joined: Oct 2007 |
Y you need such as expensive car inside the small island....
|
|
|
Mar 28 2012, 10:00 AM
Return to original view | Post
#4
|
![]()
Junior Member
43 posts Joined: Oct 2007 |
QUOTE(FaezFarhan @ Mar 28 2012, 02:25 AM) comfort level is ok so far because only drive for short distance, never try go to far. the black fabric with a fill of dark colour interior together with some silver and chrome trim look really sporty . the solid you can feel if grip the steering, i still wondering the glove box , it does look cheap although the use gas spring to slow down the movement. but the biggest thing that i worried is the dashbord panel meter, when you not turn on the key you can see only the white plastic trim. looks cheap..and extra compartment box on your right . really big and i think you can place you Smart tag device inside it.but it almost hit your leg when you open it. This post has been edited by fadlily: Mar 28 2012, 10:04 AM |
|
|
Mar 28 2012, 11:04 AM
Return to original view | Post
#5
|
![]()
Junior Member
43 posts Joined: Oct 2007 |
QUOTE(samwongjyhhorng @ Mar 28 2012, 10:48 AM) although you see the rear design is small from outside , but it does give enough space inside , they had push a little bit foward and lower down the seats, for me 5ft 4" tall , i still have almost 3 inch clearance on top when i test. the leg room also not a problem , when adjust the seat maximum towards the rear still have 1 finger gap... |
|
|
Mar 28 2012, 01:34 PM
Return to original view | Post
#6
|
![]()
Junior Member
43 posts Joined: Oct 2007 |
QUOTE(samwongjyhhorng @ Mar 28 2012, 12:08 PM) Not really straight rite..i think you can refer to the link for the image http://cdn2.paultan.org/image/P3-21A_D505-500x333.jpg |
|
|
Mar 29 2012, 09:44 PM
Return to original view | Post
#7
|
![]()
Junior Member
43 posts Joined: Oct 2007 |
GT style... haha, fast edit paint
![]() |
|
|
Apr 7 2012, 03:40 PM
Return to original view | Post
#8
|
![]()
Junior Member
43 posts Joined: Oct 2007 |
yeah lets mods
![]() |
|
Topic ClosedOptions
|
| Change to: | 0.0457sec
0.50
7 queries
GZIP Disabled
Time is now: 27th November 2025 - 03:19 AM |