spend few hours to read all pinned thread here,



when i use Riger DB102 modem, i still manage to connect but faced frequent DC

DSL Parameters and Status
Vendor ID: 00B5GSPN
Revision Number: E.37.5.49
Serial Number: 123456789abcdx
Local Tx Power: 12.1 dB
Remote Tx Power: 14.0 dB
Local Line Atten.: 58.0 dB
Remote Line Atten.: 31.5 dB
Local SNR Margin: 8.0 dB
Remote SNR Margin: 17.0 dB
Self Test: Passed
DSL Standard: G.dmt
Profile: MII
Tx Line Rate: 512 Kbps
Rx Line Rate: 1024 Kbps
Framing Structure: Framing-3
Trellis Coding: Enable
Power Management Mode: L2, L3 Both Allowed



when i use Aztech DSL605E, the dsl led keep blinking like no tomorrow

Modem Status
Modem Status
Connection Status Connected
Us Rate (Kbps) 512
Ds Rate (Kbps) 480
US Margin 18
DS Margin 6
Trained Modulation ADSL_G.dmt
LOS Errors 0
DS Line Attenuation 57
US Line Attenuation 31
Peak Cell Rate 1207 cells per sec
CRC Rx Fast 244
CRC Tx Fast 3
CRC Rx Interleaved 0
CRC Tx Interleaved 0
Path Mode Fast Path


DSL Statistics
Near End F4 Loop Back Count 0
Near End F5 Loop Back Count 0

i get shit speed when using the dsl605e, see the attachment!!


NEED EXPERT to HELP





Attached thumbnail(s)